Nathan0490
Gawd
- Joined
- Dec 3, 2005
- Messages
- 1,000
Hello,
Just put together a new i7 build for a friend, it fails linx every time at 6 minutes and we can't figure out why no matter what we try.
i7 920
Asus P6T SE ( Bios 0603 )
6GB Patriot Viper DDR3-1600 8-8-8-24
500GB Seagate 7200.12
Corsair 650HX
Cooler Master V8
Memory in Orange Slot
8-8-8-24 88 2T
Bios Settings
Ai Overclock Tuner: Manual
CPU Ratio: x20
Intel Speed Step: Disable
BCLK Freq: 133
PCIE Feq:100
DRAM Freq: DDR3-1600MHZ
UCLK Freq: Auto
QPI Link Data Rate: Auto
------------------------
CPU Voltage: Auto
CPU PLL: Auto
QPI/DRAM Voltage: 1.25
IOH Voltage: Auto
IOH PCIE Voltage: Auto
ICH Voltage: Auto
ICH PCIE Voltage: Auto
DRAM Bus Voltage: 1.66
-----------------------------
Load-Line Calibration: Auto
CPU Differential Amplitude: Auto
CPU Clock Skew: Auto
CPU Spread Spectrum : Auto
HyperThreading: Enable
Kinda followed the settings posted here on patriot site
http://www.patriotmem.com/forums/showpost.php?p=4114&postcount=3
Also tried Ocz DDR3-1600 Memory as well does the same thing, fails linx @ 6 minutes XX Seconds
Any help would be greatly appreciated.
Just put together a new i7 build for a friend, it fails linx every time at 6 minutes and we can't figure out why no matter what we try.
i7 920
Asus P6T SE ( Bios 0603 )
6GB Patriot Viper DDR3-1600 8-8-8-24
500GB Seagate 7200.12
Corsair 650HX
Cooler Master V8
Memory in Orange Slot
8-8-8-24 88 2T
Bios Settings
Ai Overclock Tuner: Manual
CPU Ratio: x20
Intel Speed Step: Disable
BCLK Freq: 133
PCIE Feq:100
DRAM Freq: DDR3-1600MHZ
UCLK Freq: Auto
QPI Link Data Rate: Auto
------------------------
CPU Voltage: Auto
CPU PLL: Auto
QPI/DRAM Voltage: 1.25
IOH Voltage: Auto
IOH PCIE Voltage: Auto
ICH Voltage: Auto
ICH PCIE Voltage: Auto
DRAM Bus Voltage: 1.66
-----------------------------
Load-Line Calibration: Auto
CPU Differential Amplitude: Auto
CPU Clock Skew: Auto
CPU Spread Spectrum : Auto
HyperThreading: Enable
Kinda followed the settings posted here on patriot site
http://www.patriotmem.com/forums/showpost.php?p=4114&postcount=3
Also tried Ocz DDR3-1600 Memory as well does the same thing, fails linx @ 6 minutes XX Seconds
Any help would be greatly appreciated.