/dev/null
[H]F Junkie
- Joined
- Mar 31, 2001
- Messages
- 15,182
I have an Cisco asa 5505 and none support dhcpv6. Anyone have suggestions for a sub $500 firewall that do dhcpv6 on the wan interface with prefix delegation of /48 or /56?
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
You could look at the EdgeRouter, it could probably do.
Not sure why you want dhcpv6 on your router/firewall though...
My guess is the OP is needing to accept a PD via DHCPv6 which the 5505 does not support.
The edge router will do it but you gotta take to cli to make it happen and then, how good a firewall is it really? OP could put the edge router in front of the ASA and use transparent firewalling...
A prebuilt or DIY pfsense box will do the job if that's an option you'd consider. Also, I'd be curious to see what Juniper has to offer. The 5505 is getting long in the tooth and Cisco really needs to release a refresh like they've already done for the rest of the line.
The edge router will do it but you gotta take to cli to make it happen and then, how good a firewall is it really? OP could put the edge router in front of the ASA and use transparent firewalling...
I've got a 5505 in transparent mode now (it is free from work for testing). None of the 55xx support this AFAIK. I had multiple issues with pfsense (2.x) doing dhcpv6 where it would end up using 100% cpu when I enabled it. At that time it was a known bug. What juniper product should I be looking at?
Comcast either will send me a /64 or I can send a hint for a /56 & they should honor it. I need something that will send a hint, get the /56 and assign it.
Not sure on comparable juniper models. Might be something in your price range and v6 PD is supported with the current junos I believe
You could look at the EdgeRouter, it could probably do.
Not sure why you want dhcpv6 on your router/firewall though...
EdgeOS 1.6 seems to do this (alpha2 currently in testing does this):
http://www.reddit.com/r/ipv6/comments/2e6el2/ubiquiti_edgeos_16_alpha2_now_has_initial_dhcppd/
https://community.ubnt.com/t5/EdgeMAX-Beta/IPv6-DHCP-PD-in-v1-6-0alpha2/m-p/973135#U973135
http://www.ubnt.com/beta
I'm ordered one & have set it up. I kind of like it, although I haven't got the ipv6-pd working yet. I did get firewalling, interfaces, nat & policy-routing setup, however for ipv4.
Asus' RT series routers with the Merlin-Wrt firmware (https://www.mediafire.com/folder/bkfq2a6aebq68//Asuswrt-Merlin) specifically support Comcast's native IPv6 setup.