Jun 9, 2005 #1 L lawrence131 Gawd Joined Feb 23, 2005 Messages 650 what software tells me what my SATA and ATA ports are running at ? I just want to make sure that they are locked properly.
what software tells me what my SATA and ATA ports are running at ? I just want to make sure that they are locked properly.
Jun 10, 2005 #2 S Smooothie n00b Joined Dec 21, 2004 Messages 21 If memory serves correctly, locking the PCI bus also locks SATA & PATA buses because they all are controlled by the Southbridge in the mobo.
If memory serves correctly, locking the PCI bus also locks SATA & PATA buses because they all are controlled by the Southbridge in the mobo.
Jun 10, 2005 #3 M musicman_ace Limp Gawd Joined Oct 30, 2003 Messages 205 I don't suppose your on a linux system. hdparm -i /dev/hda would tell you. When the computer boots, it should tell you what UDMA mode the drives are operating at.
I don't suppose your on a linux system. hdparm -i /dev/hda would tell you. When the computer boots, it should tell you what UDMA mode the drives are operating at.
![[H]ard|Forum](/styles/hardforum/xenforo/logo_dark.png){kind=logo}