I recently got a dual Xeon 450 from a friend, specs are:
Dual PII Xeon 450 1MB cache 100Mhz FSB
256MB ECC Registered 100Mhz SDRAM
MS440GX motherboard
Liteon 200W PSU
So anyway, I plug in a hard drive and video card, installed windows and rebooted a few times without a hitch.
I then proceeded to add a SCSI card and a old external SCSI 6x cd-writer. I go into windows and try to load stuff with the drive. Windows crashes, which I thought was fine since windows always does it to me.
But then when I rebooted the screen stayed blank. The power LED's on, the hdd LED's off, blank screen, no POST screen, no beeps.
I don't have a port 80h card so I don't know what's going on. Anyone have any ideas?
Dual PII Xeon 450 1MB cache 100Mhz FSB
256MB ECC Registered 100Mhz SDRAM
MS440GX motherboard
Liteon 200W PSU
So anyway, I plug in a hard drive and video card, installed windows and rebooted a few times without a hitch.
I then proceeded to add a SCSI card and a old external SCSI 6x cd-writer. I go into windows and try to load stuff with the drive. Windows crashes, which I thought was fine since windows always does it to me.
But then when I rebooted the screen stayed blank. The power LED's on, the hdd LED's off, blank screen, no POST screen, no beeps.
I don't have a port 80h card so I don't know what's going on. Anyone have any ideas?