FS: i5 9600K Delid With Copper IHS

Discussion in 'For Sale / Trade' started by Cecil, Jan 17, 2019.

  1. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    Intel i5 9600K . Delidded with a rockitcool 1151 copper IHS attached. It is not a super high clocker, but it would make a good CPU for a budget gaming build with air cooling in a lower end Z370/Z390 board that doesn't have a strong VRM. 4.9Ghz 1.35V stable with Prime 26.6 and 4.8Ghz AVX stable with 1.34V (probably could do less but haven't tested lowest voltage). AVX temp range 72C-77C, non AVX range 59C-64C.

    $225 shipped



    https://imgur.com/gallery/ba57Nj7

    Pics of the delids and relids of a Rockitcool copper IHS. Quicksilver was used for removal of the factory STIM solder, not sandpaper or razor. Super clean and used Thermal Grizzly Conductonaut liquid metal and a very thin layer of Permatex automotive gasket maker to attach the new copper IHS (the camera made the layer look thicker than it actually is).
    I have various I9 9900Ks, I7 9700K/8700K, and i5s all of which got the same treatment.


    Used a Gigabyte Aorus Elite Z390 motherboard for testing. With a 240/280mm AIO and 1.35v limit (maybe 0.02v more if temps are really good, but will be noted if so).
    Please understand this board has an excellent VRM setup, and other boards with different VRMs and LLC controls may need different voltages, and may not be stable at what I get stable. If you have a Gigabyte Aorus Z390 you should expect similar results with similar settings.

    Listings are for the CPU only no cooler or box with the copper IHS already attached and ready to go.





    EVGA GTX 1070 TI SC black edition ACX 3.0
    Card only, got it in a trade. Clean and like new.
    SOLD to dodgerpro for $280 shipped


    Intel i5 9600K . Delidded with a rockitcool 1151 copper IHS attached. It is not a super high clocker, but it is very cool at 5Ghz and would make a great CPU for a good quiet air cooler. 1.35v 5Ghz Prime95 26.6 60C-64C temp range, 4.9GHz Prime95AVX 66C-72C range. 5Ghz with up to 1.38v failed prime95AVX, but is fine with prime95 26.6.
    SOLD to superjoe for $240 shipped


    i9 9900K does 5.2Ghz Prime95 AVX and Prime95 26.6 stable. 5.3Ghz is close, Im guessing around 1.37-1.38 would do it. Temp range in Prime AVX was 66-77C. Before delid was 76-91C. De8aur sells 9900Ks delided that do 5.1Ghz for over $1,000. Listing mine for,
    SOLD to Promleminfected for $565


    i9 9900K does 5.1Ghz Prime95 AVX and Prime95 26.6 stable. 5.2Ghz was close with 1.35 but not stable. Temp range 68-75C.
    SOLD in a trade to thelead


    i7 9700K does 5Ghz Prime95 26.6 stable. First core fails on Prime95 AVX after ten minutes or so at 5Ghz, but is fully AVX stable at 4.9Ghz. So you can set the AVX option in the BIOS to drop 1-2x under AVX load, or add more voltage, up to you. 4.9Ghz PrimeAVX load temp spread was 77-87C, before delid was 81-91C. 5Ghz Prime95 26.6 was 72-77C
    SOLD to chuckd007 for $330




    Heatware under Cecil
    For trades, will consider a Gigabyte Z390 Aorus Elite or better motherboard, or high end VRM Z370. My Corsair K95 cherry red keyboard is having its LEDs die, so might be looking for a newer Corsair RGB replacement. A 500GB-1TB NVME SSD is also on my list.
     

    Attached Files:

    Last edited: Feb 12, 2019 at 3:22 AM
    Kyle_Bennett and Solhokuten like this.
  2. dgingeri

    dgingeri 2[H]4U

    Messages:
    2,836
    Joined:
    Dec 5, 2004
    Doesn't Conductonaut do bad things to bare copper over time?
     
  3. hazmatic

    hazmatic [H]ard|Gawd

    Messages:
    1,192
    Joined:
    Dec 9, 2004
    It will stain copper, but it won't impact performance. Aluminum however...
     
  4. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    It's fully safe for copper.

    Added one of the 9900ks
     
  5. Solhokuten

    Solhokuten [H]ard|Gawd

    Messages:
    1,166
    Joined:
    Dec 9, 2009
    I wish you were selling this back when I bought my 9900k. I definitely would have bit.
     
  6. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  7. geforce man

    geforce man [H]ard|Gawd

    Messages:
    1,090
    Joined:
    Jan 18, 2006
    I want so freaking bad, but just can't justify at the moment. the 6700k is still rockin :p
     
  8. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    Dropped prices a bit
     
  9. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    Adding second 9900k shortly. With 1.35v 5.2 didn't work, but 5.1Ghz seems ok so far.
     
  10. H2R2P2

    H2R2P2 Limp Gawd

    Messages:
    405
    Joined:
    Jun 18, 2006
    The Rockitcool copper IHS's I have seen are supposedly not compatible with the 9900K because the die is slightly thicker and as a result will put too much stress on the 9900K die vs the others of the same gen. Did you modify the Rockitcool? Or did they release a model to account for the die variance?
     
  11. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    They released a new model for the 9 series. That is what I used.
    There is roughly half a mill or less of space from the PCB and the edge of the IHS to allow the rtv gasket to not raise the IHS off of the die when a thin layer is used.
     
    Kyle_Bennett likes this.
  12. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    Would really like to have a couple of these sold by Thursday so I can avoid a fee on something I have to pay. Make me a reasonable offer.
     
  13. legcramp

    legcramp [H]ardForum Junkie

    Messages:
    10,750
    Joined:
    Aug 16, 2004
    Bump, nice chips that are actually stable with proof, jealous!
     
  14. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  15. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    Prices dropped some more
     
  16. capnstabn

    capnstabn Limp Gawd

    Messages:
    423
    Joined:
    Jan 6, 2006
    Shocked these haven't sold yet.
     
  17. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  18. WozniakMac

    WozniakMac [H]ard|Gawd

    Messages:
    1,447
    Joined:
    Sep 3, 2005
  19. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  20. mls1995

    mls1995 2[H]4U

    Messages:
    3,281
    Joined:
    Jan 20, 2007
    can't believe this 9900k is still here. wow.
     
  21. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  22. extide

    extide 2[H]4U

    Messages:
    3,249
    Joined:
    Dec 19, 2008
    Great prices on this stuff... watching...
     
  23. wadec22

    wadec22 2[H]4U

    Messages:
    3,796
    Joined:
    Jul 26, 2005
    same. I have zero need for one but keep trying to find a reason. :)
     
  24. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    Feel free to make offers :)

    Probably adding a couple more CPUs over the next couple weeks.
     
  25. chuckd007

    chuckd007 [H]ard|Gawd

    Messages:
    1,058
    Joined:
    Dec 8, 2007
  26. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  27. horrorshow

    horrorshow [H]ardness Supreme

    Messages:
    5,889
    Joined:
    Dec 14, 2007
    Bump for a choice 9900k!
     
  28. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  29. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  30. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  31. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  32. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    i9 sold, added i5
     
  33. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  34. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  35. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  36. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  37. ShuttleLuv

    ShuttleLuv [H]ardness Supreme

    Messages:
    7,012
    Joined:
    Apr 12, 2003
  38. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    Sold the i5. Got another i9 to add in the next couple days when its done.
     
  39. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
  40. Cecil

    Cecil [H]ardness Supreme

    Messages:
    4,437
    Joined:
    Jun 17, 2009
    Updated, 5.2Ghz i9 to be added in a couple days.
     
    DTN107 likes this.