FS: eight Zotac 1080TI - refurb - 2x unopened, 6 used for ~30 minutes each.

Status
Not open for further replies.

Archaea

[H]F Junkie
Joined
Oct 19, 2004
Messages
11,826
ALL SOLD - sold 3 here and the rest on eBay.

They were $440 before shipping tax on sale in this thread.
https://hardforum.com/threads/refurbished-zotac-geforce-gtx-1080-ti-439-99-tax-s-h.1982839/
I bought them in late June and they have 90 day warranties through Zotac. I've not registered them.

I bought these for me, thinking I would spin up a second mining rig as BTC price shot up again (towards $13K). Just running six 1070 cards right now in my single mining rig. Profits never took off for mining with the uptick in BTC over the last month :confused: --- not enough to outweigh electricity/heat in my situation anyway with .13KWh electricity. So they've been sitting in their box waiting in hopes that mining profits would raise, that hasn't happened, and apparently we won't get that wave of higher mining profits this go round.

All I did was test the cards individually for one round of 3dMark stress testing in a x370 Ryzen gaming rig. - only a 20 minute stress loop to make sure they worked. These have not been mined on in my possession, nor overclocked. 2 of them are still completely unopened/sealed.

I'll take a small loss, for my own ill-timed gamble on ordering these in hopes of mining profits spinning up, but I'll not lose my shirt - or i'll just keep them till fall I guess when I can use them in my mining setup for winter heat.

---------------------

$475 shipped and insured for the 2x unopened refurb units

$460 shipped and insured for the 6x opened/shortly tested refurb units

These have RGB lighting (color selectably on the Zotac logo) and nice quality dual fans that turn completely off at idle, and the fancy heat plat on the top of the card.

Literally less than 1/2 hour of stress test on the open units since they've been in my possession.. Those tested all passed the 3DMark stress test (required 97% stability on FPS).
 

Attachments

  • 01B6AA76-C7FF-4950-9230-32311BAFA840.jpeg
    01B6AA76-C7FF-4950-9230-32311BAFA840.jpeg
    423.2 KB · Views: 0
  • 11276774-C6D9-4A14-82B7-C0CA99FB6A4A.jpeg
    11276774-C6D9-4A14-82B7-C0CA99FB6A4A.jpeg
    755.6 KB · Views: 0
  • 11DAF54E-B411-4055-ABF5-B5E3401C817B.jpeg
    11DAF54E-B411-4055-ABF5-B5E3401C817B.jpeg
    715.8 KB · Views: 0
  • AA68B446-9498-437B-AB8B-03E200C49E23.jpeg
    AA68B446-9498-437B-AB8B-03E200C49E23.jpeg
    640.2 KB · Views: 0
Last edited:
For anyone who comes across this thread, these are the quietest 1080ti cards I've come across - and I've been through a few
 
Damn... hope these are still around, I just bought new tires.

Gottah save up again!
 
I hope you still have one left by time Amazon issues the refund for my 5700 XT.
 
My card arrived Friday. Entirely adequate packing. Repasting hs.
Clean, minor corrosion on a few fins.
The paste I am replacing looked like it was applied by a previous owner, excellent coverage, still malleable.

Clean as in it looks new.

Came apart easily, no damage to the screw heads.

The factory loctite doesn't work anymore on the screws it was applied to, no loose screws, no stripped threads.

Two thumbs up if it works when plugged in.

Bumparrific
 
My card arrived Friday. Entirely adequate packing. Repasting hs.
Clean, minor corrosion on a few fins.
The paste I am replacing looked like it was applied by a previous owner, excellent coverage, still malleable.

Clean as in it looks new.

Came apart easily, no damage to the screw heads.

The factory loctite doesn't work anymore on the screws it was applied to, no loose screws, no stripped threads.

Two thumbs up if it works when plugged in.

Bumparrific

If paste was changed it was by zotac. I didn’t do anything to the card at all, except throw it in a gaming rig for a short 3dmark stability test loop to assure it was good. Glad you received it okay. I hope it serves you well in the coming years.
 
Status
Not open for further replies.
Back
Top