fcs & recieve errors on cisco gear

tacos4me

Gawd
Joined
Apr 5, 2006
Messages
815
safe to assume this is a cable/optics issue? having all kinds of issues with this switch. can't make it to the thing until tomorrow.

Port Align-Err FCS-Err Xmit-Err Rcv-Err UnderSize OutDiscards
Te0/1 0 85 0 87 0 0

Port Single-Col Multi-Col Late-Col Excess-Col Carri-Sen Runts Giants
Te0/1 0 0 0 0 0 0 0

TenGigabitEthernet0/1 is up, line protocol is up (connected)
Hardware is Ten Gigabit Ethernet, address is d0d0.fd26.d41d (bia d0d0.fd26.d41d)
MTU 1500 bytes, BW 10000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Full-duplex, 10Gb/s, link type is auto, media type is 10GBase-SR
input flow-control is off, output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 1606000 bits/sec, 192 packets/sec
5 minute output rate 294000 bits/sec, 143 packets/sec
1794525 packets input, 2207860718 bytes, 0 no buffer
Received 257 broadcasts (10 multicasts)
0 runts, 0 giants, 0 throttles
87 input errors, 85 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 10 multicast, 0 pause input
0 input packets with dribble condition detected
 
Back
Top