I just bought 3x asus vs239h-p monitors and I really want to be able to use them in portrait and landscape mode.
Let me start by saying price and price/value is first priority.
I have considered using 3 dell stands off of 23 or 24 inch dell monitors.
But would just bending/cutting off the tabs work?
or would I need to buy the optional vesa mounting kit from dell?
Something like this but I see them for much cheaper often.
3 stands like this would work but for 90 I feel like I can get 1 stand to do 3.
I could also build any number of diy 3 in 1 stands but most seem to not rotate.
I however saw this thread here http://hardforum.com/showthread.php?t=1586580
In the effort of not wanting to bump an old thread, I am making my own. It seems there is enough joints in that particular setup to allow the monitors to pivot to portrait. But after tightening/loosening the threads, how can I ensure the pipes will stay in place?
I've also seen several single monitor stands that are meant to pivot, some based around galvanized pipe, and others using a lazy susan piece with bearings to pivot. Could any of these single monitor designs be applied to a triple stand?
Experience, and pictures are especially welcome!
Thanks
Let me start by saying price and price/value is first priority.
I have considered using 3 dell stands off of 23 or 24 inch dell monitors.
But would just bending/cutting off the tabs work?
or would I need to buy the optional vesa mounting kit from dell?
Something like this but I see them for much cheaper often.
3 stands like this would work but for 90 I feel like I can get 1 stand to do 3.
I could also build any number of diy 3 in 1 stands but most seem to not rotate.
I however saw this thread here http://hardforum.com/showthread.php?t=1586580
In the effort of not wanting to bump an old thread, I am making my own. It seems there is enough joints in that particular setup to allow the monitors to pivot to portrait. But after tightening/loosening the threads, how can I ensure the pipes will stay in place?
I've also seen several single monitor stands that are meant to pivot, some based around galvanized pipe, and others using a lazy susan piece with bearings to pivot. Could any of these single monitor designs be applied to a triple stand?
Experience, and pictures are especially welcome!
Thanks
As an eBay Associate, HardForum may earn from qualifying purchases.