so I recently decided it was a good idea to shoot a jet of water directly on the cpu die and here is a build/result post on it!
https://image.************/g5eQFa/P_20170228_200257.jpg
water-proofing capacitors I used plastic epoxy from home depo for the majority of this build.
https://image.************/kEuaFa/P_20170302_164717.jpg
water-proofing capacitors
https://image.************/kcrNva/P_20170301_160144.jpg
results of water-proofing capacitors im actually pretty happy with it
https://image.************/nr2HTv/P_20170228_222959.jpg
lapping heat spreader to make it look good
https://image.************/gWpLgF/P_20170228_223007.jpg
cutting some channels in heat spreader because their is only ~.5 mm between the die and spreader.
https://image.************/koRpaa/P_20170301_160205.jpg
lineup of all the components.
https://image.************/mNZxTv/P_20170301_182049.jpg
drilled holes in the spreader
https://image.************/kFft1F/P_20170302_164723.jpg
more epoxy work
https://image.************/i2ULgF/P_20170303_202213.jpg
results of epoxy work
https://image.************/bC0hva/P_20170303_160015.jpg
initial text just to see if it was dead
https://image.************/cz8P8v/P_20170305_134642.jpg
it is now in my custom loop build
results:
cpu is a l5520 i may give this a try soon with a i7 920 courtesy of bluesynk
idle
39-42c
load
48-52
i actually mad a mistak installing it as the imput that was designed to shoot the water on the die is being used as the output
Updated pic link (original post untouched)-https://imgur.io/gallery/voeu6
https://image.************/g5eQFa/P_20170228_200257.jpg
water-proofing capacitors I used plastic epoxy from home depo for the majority of this build.
https://image.************/kEuaFa/P_20170302_164717.jpg
water-proofing capacitors
https://image.************/kcrNva/P_20170301_160144.jpg
results of water-proofing capacitors im actually pretty happy with it
https://image.************/nr2HTv/P_20170228_222959.jpg
lapping heat spreader to make it look good
https://image.************/gWpLgF/P_20170228_223007.jpg
cutting some channels in heat spreader because their is only ~.5 mm between the die and spreader.
https://image.************/koRpaa/P_20170301_160205.jpg
lineup of all the components.
https://image.************/mNZxTv/P_20170301_182049.jpg
drilled holes in the spreader
https://image.************/kFft1F/P_20170302_164723.jpg
more epoxy work
https://image.************/i2ULgF/P_20170303_202213.jpg
results of epoxy work
https://image.************/bC0hva/P_20170303_160015.jpg
initial text just to see if it was dead
https://image.************/cz8P8v/P_20170305_134642.jpg
it is now in my custom loop build
results:
cpu is a l5520 i may give this a try soon with a i7 920 courtesy of bluesynk
idle
39-42c
load
48-52
i actually mad a mistak installing it as the imput that was designed to shoot the water on the die is being used as the output
Updated pic link (original post untouched)-https://imgur.io/gallery/voeu6
Last edited: