Custom_MOD cases - SX, M mini, SLM, FX

[mrkomis]

May I ask about compatibility of GeForce 1080ti graphics cards? Anyone tested if they fit in 5.94L version?

 

[AleksandarK]

May I ask about compatibility of GeForce 1080ti graphics cards? Anyone tested if they fit in 5.94L version?

In witch 1080 TI are you interested so i check that for you?

 

[mrkomis]

In witch 1080 TI are you interested so i check that for you?

EVGA GeForce GTX 1080 Ti SC2 GAMING
Thank you

 

[AleksandarK]

It fits. You are welcome.

 

[mrkomis]

Which one PCI riser is used in this case?

 

[AleksandarK]

It is Li-heat 300mm long type D.

 

[mrkomis]

I can not find any rewiev about it. There is one video about test in link you provided but it tells me only about a score in benchmark when using this riser. But I don't know what score was without it. Has anyone used it? Is there any loss when using newer graphic cards? Especially gtx 1080ti?

 

[AleksandarK]

It is the best riser cable on the market right now. Performance loss when using even the most powerfull cards is little to none. It has a bunch of engineering behind it and it is very high quality. It comes in wide range of sizes and PCIE conector placment, like type A,B,D etc. If it helps even the Peter brands or L3P has used it.

 

[stelsevo]

Dear customers and other people! Good news. Today the factory sent out the cases. I'll get them on Monday. Starting Tuesday I will immediately send them to you. Why so long? I know you are waiting for a very long time. I'm sorry that this happened. Part of the blanks was defective because I miscalculated in the calculations. They had to be ordered anew. Also the plant did not fulfill the order within the agreed period. I did my best. I wrote and called the plant every day to speed up the process. Many thanks for your patience. I will continue to work on the cases and improve them. Sincerely.

 

[stelsevo]

 

[stelsevo]

 

[stelsevo]

I present to your attention two new audits! A little later I will write the details. The design has undergone changes. Added more ribs. Party 2 will receive a new version of SFX 5.9L rev.1.1. Many thanks for your support and patience!

 

[stelsevo]

So update 1.1 and 2.0. Let's start from the front. Now you can install 2 hard disks using a special mount. Mounting removable. Also at this place you can install an 80mm fan. Further more!

 

[Bahn Yuki]

Stelsevo i'm interested in this case, should I wait for the REV 2.0? I currently have a Nvidia GTX 1080TI FE.

 

[stelsevo]

Stelsevo i'm interested in this case, should I wait for the REV 2.0? I currently have a Nvidia GTX 1080TI FE.

Even today we accept orders for both revision 1.1 and 2.0

 

[Bahn Yuki]

Is liquid cooling possible in the 6.38L? I was going to research if the 80MM fastenings could have a rad there.

 

[stelsevo]

Is liquid cooling possible in the 6.38L? I was going to research if the 80MM fastenings could have a rad there.

I think yes. Check up possibility.

 

[Bahn Yuki]

This guy was able to fit 92mm rad in his dan sfx. If it's possible on the 6l case, I'll give it a shot.

 

[stelsevo]

The next batch of blanks was obtained. The day after tomorrow will be made and sent for painting.

 

[stelsevo]

Important update!

The SFX 5.9L case is designed for installation of thin video cards with a thickness of not more than 38mm. As a rule, reference models will do. However, when installing a long video card, they are very close to the power supply. We recommend that you install a mini graphics card with a length up to 180mm. If you are planning to install a large video card, then it is better to order a case of SFX 6.2L

 

[Revenant_Knight]

Got My 3.24L ITX yesterday. Can't wait to build it. Just need Intel to launch the 8700T CPU first ...

 

[stelsevo]

SLIM itx 3.6L rev.4

 

[Deleted member 82943]

1.27L (i7-6700 + GTX 1060)
View attachment 21388 View attachment 21389 View attachment 21390 View attachment 21391 View attachment 21392 View attachment 21393

Ok I’m interested. Now to find out where to get MXM parts and the rest

 

[KMPKT]

Ok I’m interested. Now to find out where to get MXM parts and the rest

https://www.newegg.com/Product/Prod...6158059&cm_re=Deskmini-_-56-158-059-_-Product

 

[Deleted member 82943]

https://www.newegg.com/Product/Prod...6158059&cm_re=Deskmini-_-56-158-059-_-Product

Nice! Too pricey for me right now but I am watching this space.

 

[stelsevo]

User manual for installing accessories in the MINI itx 3.5L

 

[stelsevo]

SFX aio 9.9L rev.4.2

PHOTO ALBUM
Specs: Revision 4.2
- Volume: 9.9L (305mm x 130mm x 250mm)
- Weight 1.9kg
- GPU: length <278mm, height <150mm, width <43mm (GTX 1080ti FE compatible)
- CPU Cooler: up to 60mm (Corsair H100i compatible)
- AIO: radiator 280x30x123mm (FANs: 2x120x25mm)
- RAM: up to 68 mm
- FANs: 1x120x25mm
- Storage: 2 x SSD 2.5" (Installation instead of a body fan) and M.2
Additional fastening of hard disks (Not included in the basic construction) allows you to install
1хSSD/HDD 2.5" 7mm
1хHDD 3.5" or
2хSSD/HDD 2.5" 7mm
2хSSD/HDD 2.5" 9mm
2хSSD/HDD 2.5" 15mm
With the installed hardware, the allowable size of the video card
GPU: length <177mm, height <140mm, width <42mm(GIGABYTE GTX 1080 Mini compatible)

 

[stelsevo]

User manual for installing accessories in the SLIM itx 3.6L case

 

[stelsevo]

Now with the case you can order a convenient and reliable Sata cable. Also you can order it yourself in the modDIY store.

SSD High-Speed 6Gbps SATA III Cable (20cm)
SSD High-Speed 6Gbps SATA III Cable (30cm)
[Straight - Right-Angle] [Straight - Straight]

 

[stelsevo]

Friends, now with a crane to install the drives will be supplied with SATA power cable for 5 connectors. Also included are all the screws necessary for installing the drives.

 

[stelsevo]

Now you can order different accessories for our cases. Just fill out the order form.

Not all positions are in stock. It takes some time to make.

Delivery is calculated individually.

https://goo.gl/forms/uqRbLVSDnjEOKWB82

 

[stelsevo]

The new FLEX mini 4.4L rev.4 building

CASE FLEX mini 4.4L rev.4
The new building is in stock. Sending out the next day! Delivery around the world is included in the price.



Specs:
- Material: 1.5mm Aluminium, Powder Coating Black texture
- Volume: 4.4L (225mm x 190mm x 103mm)
- GPU: length <175mm, height <132mm (Giga 1080 Mini and MSI 1070 Aero ITX compatible)
- CPU Cooler: up to 39mm (Noctua L9i compatible)
- RAM: up to 42 mm
- Storage: M.2 and 1x2.5" SSD
- PCIe riser: LiHeat 300mm D.type
- PSU: Flex ATX 1U Mini-ITX (Seasonic SSP-300SUG, FSP 400W, Athena Power 400W, FSP 500W Platinum etc)
- Dust filters
- Front Panel I/O ports: 1 x USB 3.0
- Power button - Nickel-plated Metal (BLUE LED)
- Custom MOD logo RGB LED
- Price: $199 (Case + PCiIe riser + Worldwide Shipping)
Payment method: PayPal

 

[stelsevo]

For a new revision of the housing FLEX mini 4.4L new Cable Mod. The case became a bit larger and for convenient installation we revised the length of the wires for the PSU SeaSonic SSP-300SUG MOD 80 PLUS Gold mod

 

[stelsevo]

User manual for installing accessories in the SFX mini case

 

[stelsevo]

Friends, we are pleased to present the final update of the MINI building. The top cover is now fixed with a unique lock (ULC), which provides a lasting connection without unnecessary screws from above.

 

[james4832]

Can I ask why you chose to run the PCI-E riser under the motherboard in the CustomMod Slim, instead of under the GPU? I am going to build my own case for personal use and was wondering what the best method is.

 

[stelsevo]

Can I ask why you chose to run the PCI-E riser under the motherboard in the CustomMod Slim, instead of under the GPU? I am going to build my own case for personal use and was wondering what the best method is.

With this arrangement, we achieved the smallest size of the case. Also, our goal was to place the motherboard and video card face to face.

 

[stelsevo]

We are pleased to bring to your attention a new case! In the photo, the prototype and we have already planned some changes, namely:

1. Remove the ventilation hood from the front.
2. Add some mounting holes.
3. Make similar vent holes in the floor and back cover.
4. Add an internal partition separating the graphics card from the motherboard. (not exactly)

Perhaps you will tell me what needs to be changed.

case SLIM M2 8.1L prototype
PHOTO ALBUM (is not yet available for order. testing)

Specs:
- Volume: 8.05L (330mm x 305mm x 80mm)
- Weight 1.8kg
- The CPU faces up and the GPU faces up
- Material: 1.5mm Aluminium, Powder Coating
- GPU: length <298mm, height <130mm < 42mm
- CPU Cooler: up to 58mm or aio radiator 120mm (Corsair H60 compatible) only SFX PSU and GPU to 170mm
- RAM: up to 60 mm
- Storage: M.2 and options below
1) HDD: 1 x 3.5" (it is possible to install the button in front and USB ports)
2) HDD: 1 x 3.5" and 2 x SSD/HDD: 1 x 2.5" (without USB ports, the back-up button)
3) SSD/HDD: 2 x 2.5" and FAN 80,92,120 x 25mm (it is possible to install the button in front and USB ports)
4) SSD/HDD: 4 x 2.5" and FAN 80 x 25mm (it is possible to install the button in front and USB ports)
5) SSD/HDD: 6 x 2.5" (without USB ports, the back-up button)
- PSU: SFX/SFX-L
- PCIe riser: LiHeat 350mm B.type

 

[DG25]

I wish it was a bit slimmer, about 66mm, like the Sentry. Other than that, i like it!

 

[ReaperX22]

Great! This could definitely be an alternative to the Sentry (which I've been waiting for a retail sale of..)