Corsair sp rgb fan does not turn on

Sontungmtp

n00b
Joined
Jun 19, 2020
Messages
11
I have 3 corsair sp 1 ml which are connected to commander pro. The ml has rgb but 3 sp dont have. They are all spinning. the problem with icue software or hardware?
 

trick0502

Supreme [H]ardness
Joined
Apr 17, 2006
Messages
5,411
you might need to set the number of pins to 3 or 4

1594405200691.png
 

Jamie Marsala

Limp Gawd
Joined
Mar 9, 2016
Messages
290
You can not mix fan types on the same RGB Fan Hub. If you have 1 ML and 3 SP then you need to RGB Fan Hub's to control the RGB on all 4 fans. You would connect one RGB Hub to LED 1 and one RGB Hub to LED 2 on the Commander Pro, or Lighting Node Pro. Then on whatever device you connect it to you have to set the correct fan types up on each Hub, In the Lighting setup tab and then set the RGB in the appropriate Lighting Channel tabs.
 

Sontungmtp

n00b
Joined
Jun 19, 2020
Messages
11
Yeah, remove the ML and now 3 SP fans RGB is on. Weird, I used to have 3 SP and 3 ML and they all turn on.
 
Top