I just got 2GB of the 9136 to go with my Striker Extreme and having problems getting to it's rated speed of 1142.
I set SLi enabled to Expert and manually set the timings and speed to 5-5-5-15 @2.1 & 1142, but actual in bios show mem spd at 1066. Then in windows, cpu-z shows mem spd at 1066, 533 freq @1:2 ratio. If i set Sli enabled to oc 0% with timings/vcore manually set, i get a long beep at restart and must power off. If I then set all mem timings/vcore to auto, I still get the long beep issue.
No errors on memtest for 7+ hours.
So what do I need to do to get it running at its rated speed of 1142?
Thanks
I set SLi enabled to Expert and manually set the timings and speed to 5-5-5-15 @2.1 & 1142, but actual in bios show mem spd at 1066. Then in windows, cpu-z shows mem spd at 1066, 533 freq @1:2 ratio. If i set Sli enabled to oc 0% with timings/vcore manually set, i get a long beep at restart and must power off. If I then set all mem timings/vcore to auto, I still get the long beep issue.
No errors on memtest for 7+ hours.
So what do I need to do to get it running at its rated speed of 1142?
Thanks