cooler master cosmos s gallery

90106614si2.jpg


54263891kc7.jpg


96322455sj9.jpg


77172063gq4.jpg


75011210tg2.jpg


sonia1.jpg


Fore other pics ::LINK::
 
The Swiftech GTZ is directional and by the looks of it emir you have it the wrong way round :confused:

st_gtz_inlet.jpg
 
beautifull.wait for another users with cosmos s
show the pictures from inside without sidepanel.
 
some update,i put a fan in the bottom of the case,its a coolermaster fan with red leds.
URL=http://imageshack.us]
dscf2137yt4.jpg
[/URL
 
its time to say my real config

hardware:
intel q9450 rev c1@3,5ghz daily use
asus maximus formula
zotac gtx 280@715/1550/2500 daily use
2x2048 ddr 1100 mushkin
2x640gb wd 6400aaks
pinnacle dual dvb-t pciex
creative xfi fatality champion platinum
dvdrw samsung 183la sata
fan controller zalmann zmfc-1,schyte kaze master 5,25
psu thermaltake toughpower 750w
case coolermaster cosmos s
i have -2 fans schyte sleepstream 1600rpm
-4 fans Enermax magma 1500 rpm
-2 fans enermax uc12-aebs
-1 fan nexus pwm
-2 fan coolermaster silent
2 akasa uv blue cold cathode

water cooling hardware
cpu wb swiftech apogee gtx all cooper lapped
gpu wb EK acetal gtx 280 and backplate
mips wb kit for mobo
metal fitings bitspower 1/2
tubing tygon r3603 3/8,5/8
reservoir EK multi option 100mm
pump laing ultra ddc-1t +xtop EK rev 2
hwlabs black ice gt extreme 360 gentwo
alphacool nexxos 2 rev 2 extreme
asetek black ice 120mm
 
Last edited:
some news,sata cables,white neon recom,and new thermalpaste for cpu,artic cooling mx-2
http://i44.tinypic.com/5pljs5.jpg[/IM]


[IMG]http://i42.tinypic.com/2mzwdhz.jpg
 
emir,you are from turkey,nice country i visit this country couple years ago.
 
after long thinking ,i change my reservoir,with EK multioption rev 2 100mm .
24pif7m.jpg
 
i intend to buy,another 2 radiators black ice 120mm,for bottom of the case,under pump,and rear of the case,i hope to cool bether my rig.
 
i mount one 120mm asetek black ice radiator.
URL=http://imageshack.us]
dscf2210.jpg
[/URL
 
new fan controller scythe kaze mastes 5,
URL=http://img525.imageshack.us/my.php?image=dscf2217.jpg]
dscf2217.jpg
[/URL]
[/URL
 
new fans enermax magma 12cm ,i put on the top of the case,and bottom one piece.
URL=http://img14.imageshack.us/my.php?image=dscf2238.jpg]
dscf2238.jpg
[/URL
 
some news,tomorow i receive a new psu,a great psu,enernax revolution 85+ 850w.
Tomorow i put the pictures hier
 
its not orange,is red.
i receive the psu,but i have bad news,not work good,when enter in bios,save and exit and not boot,with old psu,work fine,without problems.
i send it back to the suplier ,and wait for the future order.
 
Finally finished with my new setup

CIMG0417.jpg

CIMG0416.jpg

CIMG0414.jpg


Its still a wip but once I finish with the leak tests and everything I'll redo the wires so it looks better.
 
where is the picturemi change my intel quad with core i7 kit.work very nice.



 
So I have to ask, what's the build quality on these cases? I have had a Antec Super Lanboy since my first build, and have been thinking of getting a larger case. I've been a fan of Antec forever, and have been thinking of picking up the new P183, but came across a great deal on the Cosmos S case as well.
 
I think the build quality is good. I actually have an Antec Super Lanboy in another room for comparison. The P183 is probably a quieter case due to the door and outer case material. Fit and finish is pretty good. No problems with cheap rattles or vibrations. Microcenter has a hot deal on them right now, and are well worth it at that price. I would consider it a step down from my Lian Li v1000 in quality, but better in layout.
 
How easy is it to paint the inside/outside of this case?

Also, does anyone actually own the limited edition black version of this case? From the photos I've seen, it looks gorgeous.
 
Back
Top