Skillz'n Magic
Weaksauce
- Joined
- Mar 6, 2008
- Messages
- 114
I'm having trouble getting our switches to synchronize their time with the routers. The routers will sync OK with our central time server but the switches won't sync with the routers. I want to setup a hierarchical system, so syncing the switches directly with the time server isn't an option.
On the switches I've tried the following commands (bogus IP address, and obviously only one command at a time):
ntp 192.168.1.1
ntp peer 192.168.1.1
ntp server 192.168.1.1
They don't sych and when I do a sh ntp status I get the following:
Clock is unsynchronized, stratum 16, no reference clock
I'm sure I'm doing something wrong. Any ideas?
On the switches I've tried the following commands (bogus IP address, and obviously only one command at a time):
ntp 192.168.1.1
ntp peer 192.168.1.1
ntp server 192.168.1.1
They don't sych and when I do a sh ntp status I get the following:
Clock is unsynchronized, stratum 16, no reference clock
I'm sure I'm doing something wrong. Any ideas?