Case Labs TH10 4way classifed and more

Juggalo23451

Weaksauce
Joined
May 2, 2011
Messages
78
CPU MAG CASE MOd WInner
53660_10151474759374937_1251364681_o.jpg

http://www.computerpoweruser.com/DigitalEditions/Default.aspx
pgs44-45

http://www.youtube.com/watch?v=qIb_iHH1jqM
http://www.youtube.com/watch?v=eGrmeWTmOc0
IMG_0439.jpg

IMG_0438.jpg

IMG_0440.jpg

IMG_0441.jpg

IMG_0448.jpg

IMG_0447.jpg

IMG_0449.jpg

IMG_0450.jpg

IMG_0451.jpg

IMG_0453.jpg

IMG_0457.jpg

This case is definitely massive can fit 4 480 rads internally. You could fit a 480 rad in the front and a 360 or another 480 in the front. Build quality is exceptional. Packaging for the case was very detailed. It took me about 20 min or so to remove this protective film on the case.

Specs of build
Evga 4 way classified
Intel 970 ordered
2 gtx590s
Muskin ram 6-12gig
2tb wd caviar black
ssd 128 crucial c300
psu 1500 silverstone

Water cooling
primochill Orange 1/2x 3/4 tubing
enzotech compression fittings 1/2x3/4
2 MCP35X pump
Koolance 402x2 reservoir - run pumps in series
White HK
Koolance water blocks
Koolance sli adapter
2 RX 480 rads
1850 Gentle typhoons pull
ek 4 way classified water block
loop order will go
res-pump-rad-gpu-gpu-rad-cpu-chipset-res

Reason I have the chipset last is because it has the most restriction
IMG_0432.jpg
IMG_0433.jpg
IMG_0435.jpg
IMG_0436.jpg

IMG_0457.jpg
 
Last edited:
why not mount the GPUs with more slot spacing for more airflow? :p

Nice case!! :D


EDIT: fail on my part, I didn't see the other posts earlier!! o.0 <-- that's my excuse!

EDIT2: are you also on OCN? :D
 
why not mount the GPUs with more slot spacing for more airflow? :p

Nice case!! :D


EDIT: fail on my part, I didn't see the other posts earlier!! o.0 <-- that's my excuse!

EDIT2: are you also on OCN? :D

yes i am part of ocn is that ok?
 
Why wouldn't it be ok to be a part of OCN? I'm a member as well :)

I don't think I'd choose that particular case, but if they had a 700/800D style (less barebones... I don't want to expend the energy to describe what I want...blah) case with similar options, and I wanted to make a monster WC-rig, then I'd be all over it.

Huge potential... I didn't know about these, thanks.
 
Why wouldn't it be ok to be a part of OCN? I'm a member as well :)

I don't think I'd choose that particular case, but if they had a 700/800D style (less barebones... I don't want to expend the energy to describe what I want...blah) case with similar options, and I wanted to make a monster WC-rig, then I'd be all over it.

Huge potential... I didn't know about these, thanks.

Well lets just say a certain forum did not like me being part of OCN and made a big deal about it.
 
i love those xlf fans. i use them in my case .. 2 orange xlf on the d14 with a rear orange xlf on the case. it looks nice against the three blue coolermaster 200mm fans top side n front in my haf932. i love the white and orange theme and your wiring is far superior :)
 
Back
Top