Welcome
Ok, so this thread has become my little project of installing a laped BigT on my new xp-mobile 2400+ (45w). We'll see what the "after" temps look like and what the overclocking increase is ... if any.
This thing is huge!
Before Temps:
Runing volcano 7+ w/ Panaflo M1A 120 adapted to 80 interface
This is running Prime95 Priority 10 untill the temps leveled
Before: WoW That Sucks!
After about 6 hours of 400, 600, and 800 grit papers
Nearly completed 2000 grit
After 10,000 grit polish
bent some fins with the air compressor
hand sander
polishing grit/gunk
stock fan
PERFORMANCE RESULTS: 12 Degree C Lower - Stock 1.8 Full Load ----- 50C -> 38C
INSTALLED:
OVERCLOCK TEMPS: Full Load Between 41C and 42C at 2.25 w/ 1.65vcore(max limited)
See above for stock 1.8ghz full load at 38C
FS: Ti-83 Plus & Ti-89
[url]www.easypckits.com for all your lapping needs
[/URL]