Are m2 sata and m2 nvme enclosures supposed to be cross compatible?

biggles

2[H]4U
Joined
Jul 25, 2005
Messages
2,215
As an Amazon Associate, HardForum may earn from qualifying purchases.
different controller probably require different enclosures. googling didn't find me any dual types.
 
They are different connections, so no, they are not compatible with each other.
 
They are different connections, so no, they are not compatible with each other.

That's a little confusing as they probably both have "M key" connections. The controller is probably more accurate.
 
There are no models that are cross compatible, but there are USB models that support NVMe PCie drives such as this Sabrent.
 
As an Amazon Associate, HardForum may earn from qualifying purchases.
Depends on the bridge chip in the enclosure, although there are some hybrid SSD controllers that include a bridge chip for embedded use.
 
M.2 drives are physically keyed different for SATA or PCI-E. In order to support both drive types, a USB enclosure would require 2 physical M.2 slots, as well as seperate controllers for each slot.

On the left is "B key," which is used for SATA drives, and on the right is "M key," which is used for PCI-E drives. Please note, NVME is not a physical interface, but a transport protocol used with PCI-E drives.

2560px-M2_Edge_Connector_Keying.svg.png
 
M.2 drives are physically keyed different for SATA or PCI-E. In order to support both drive types, a USB enclosure would require 2 physical M.2 slots, as well as seperate controllers for each slot.

On the left is "B key," which is used for SATA drives, and on the right is "M key," which is used for PCI-E drives. Please note, NVME is not a physical interface, but a transport protocol used with PCI-E drives.

View attachment 182837

I agree with the 2 controllers, not with the 2 physical slots, if they can make 1 slot use both on motherboards they can do so on other devices too, now would it be cost efficient that's another matter.
 
Back
Top