Any idea what form factor this PSU is?

[VulturEMaN]

http://www.ascendtech.us/itemdesc.asp?ic=CSPPB190036R&eq=&Tp=

Looking to do a mod to an old PB case I have lying around....unfortunately I threw away almost all of the guts a long time ago.

What I'd like to try and aim for is absolutely no mods to the outside of the case. So finding a PSU that lines up with those screwholes, or retrofitting a PSU into the housing of that linked one, are my main options to remain true to no moddng of the case.

Center of the screw holes is 95mm wide and 60mm tall, but theres another 40mm above the top of that for venting.

It'll be fun putting a quad core processor inside of a 486 case methinks I know its gonna be hard but the final product will be the purest damn sleeper you ever did see.

 

[VulturEMaN]

nobody knows?

 

[Dangman]

Sorry, can't tell what form factor that is. Looks like a server type. Considering how old the case and PSU are, it may have been a proprietary PSU factor.

Hmm, it does resemble this PSU a little bit:
http://www.ewiz.com/detail.php?name=PS-PWS-01

Look through ewiz.com's PSU section. A few of those PSU look similar to that:
http://www.ewiz.com/query.php?dp=1&categry=136&dt=2&ob=&nl=50&anchor=#displaytop

 

[davidhammock200]

It is a very old (still has -5V) and does not have +3.3V, it will NOT power a modern PC.

Perhaps it is from the 80386 era.

 

[VulturEMaN]

Its from a PB Legend 2000.

The 3 screws is similar to the SFX type, but it isn't one...the 3rd screw on my case isn't in the middle...its on the top..

Looks like I'll just have to buy an old PSU from somewhere and transplant the innards from a current one into it.