680i "double dash" post code

B

buffbiff21

Gawd
Joined
Sep 27, 2006
Messages
1,014
I think my 680i board is dead. I pulled everyhting apart earlier today to reconfigure my water loop, add a HDD, switch PSUs, and add another 8800GTX.

Now, when I turn the power on, the fans go, the pumps go, but i see or hear NOTHING. no post beep or anything.

I looked on the boards post code read thingey, and there were two dashes.

Ive tried every trick in the book - resetting CMOS, replugging all power cables, etc.

Does this mean my board is dead? I cant possibly think of anything else to do.
 
did u flash to p25? one thing i know is mine has the "--" and it means the bios is corrupt or dead. that is what the tech at evga told me with the --. although mine was from the bios update
 
The only 2 things I have seen to cause the "--" , are a corrupt BIOS , or a grounding problem. If you didn't flash your BIOS, but took out your board when you were tweaking your setup, then grounding might be your problem. Pull it back out and make sure your board isn't grounding out somewhere.

Good luck.
 
You must log in or register to reply here.
Back
Top