4850s CrossFIRED w/ S1 -BEWARE PICS!-

Spaxspore

Gawd
Joined
Nov 12, 2007
Messages
561
So my VRM heatsinks came today, so I was able to install the s1s onto my 4850s.


Here is my test/work bench the monitor i have the system hooked up to is a 20.1in Samsung @ 1600x1200, FYI I game on a Hanns_G 28.1 @ 1920x1200 Monitor.


PICS-

Picture058_resize.jpg


Heat Pipes Kick ASS!


Picture059_resize.jpg



The new VRMS sinks doing there job

Picture060_resize.jpg


XFIRED And Rdy to ROCK

Picture067_resize.jpg


TIGHT fit...

Picture069_resize.jpg



Picture073_resize.jpg


GPU on IDLE

Picture075_resize.jpg



GPU Gaming MAss Effect

Picture081_resize.jpg


Picture079_resize.jpg


5-10min LOAD


Picture082_resize.jpg





Also,

I later played 20min of COD4 online, and after playing i immediately checked the temps, GPU1 was 57c and GPU2 52c...

Over All not a bad little Heat sink, considering both 4850s are 100% passively cooled. One more thing, after i took the pics one of the heat sinks came off so I used some thermal epoxy and found a way to connect the 2nd Crossfire connector..:cool:
 
[edit]
Reading comprehension, sorry.
:(

The title of your thread makes it sound like something bad happened.
 
heehhe sorry for the kinda miss leading title, the beware was meant to warn people there is a few pics in here.
 
good stuff but it's even better when you strap a 120mm to them :cool:

can't fit S1+120mm with Crossfire you say??? *cough*

poor 3d06 score but we know to expect that ;)

img0724yz6.jpg
79370975pp0.jpg
 
nice unfortunately, i may be able to put one fan on one of them, but my SB XFI is in the way of the 2nd 4850 so i cant do it on both.
 
Back
Top