4 Post Rack

maybe posting outside of the gallery would get more answers. I think it should work though.
 
Would "this work"? That's a very subjective statement. Professionally....I would say no. You have other guys that would say....definitely.

Typically, You'll have a 2 post rack hold your switching, routing, telco, etc. equipment.

For your servers you'll want sliding rails to pull your equipment out and work on it. For a rack that holds servers, it's going to run you in the neighborhood of 1,000 bucks.

Example....http://www.dell.com/content/topics/topic.aspx/global/products/pedge/topics/en/why_racks?c=us&cs=555&l=en&s=biz&~ck=mn
 
hmmm, make sure you know what you are getting, it might just be the top and bottom pieces, since the mor84 is a 2 post rack.
Or just the top and back rails, since the box is only 2x4x87"
 
mobiux said:
hmmm, make sure you know what you are getting, it might just be the top and bottom pieces, since the mor84 is a 2 post rack.
Or just the top and back rails, since the box is only 2x4x87"
Click to expand...

That's 2 feet wide (19" in width rack) x 4 feet deep x 87 inches in height. Those dimensions are normal.
 
You must log in or register to reply here.
Back
Top