2 Pumps or 1 Pump For This Loop?

L

lostiam

n00b
Joined
Mar 21, 2009
Messages
5
Is 1X MPC 655 pump enough to power this loop or do I need to use to pumps?

Loop 3/8" tubing and has 2X MCR320, 1X MCRES, 1X Apogee GTZ, 1X DD GTX 295 Block

I want to only use 1 Loop, since I don't have space for a second Res.
 
Are you planning to SLI in the future? If yes, then run two loops. If no, i think the 655 could handle that loop.
 
That pump is a monster, I would not be worried unless you want to throw on another GTX and NB/SB/Mosfet blocks. Even then I think you would want to split the loop for temps not pump power.
 
Tom128: How should I split the loop? Do you mean split the loop with what I have now, or split it only if I add the NB, SB, Mosfet blocks? Thanks in advance for all the input!
 
I think you'll be ok with 1 pump, but the others are correct, if you plan to add more to that loop, you are going to want to split it into 2 loops, or put 2 pumps on it. As it exists though, I think you'll be ok.
 
You must log in or register to reply here.
Back
Top