I have just added a switch Netgear xs708t 10gb switch and connected my PC and the OmniOS NAS via an intel x540-t2 on each.
I can see that the NAS connection on the switch is green and looks like working although I haven't tried to transfer anything to it yet as I can't get the Windows PC to connect to the switch somehow.
The switch comes as default with 192.168.0.239 IP address with subnet 255.255.255.0 and 192.168.0.254 gateway, I have left it as is and set a static IP for the NAS in the 192.168.0.x and the same for the PC for the intel x540's.
I have disabeled and re-enabled the x540 on the windows PC, tired a different cable without success, should I maybe have reconfigured the switch to be in the same IP address range of my home network 192.168.1.x and connected the xs708t to the home network switch Netgear GS724TV3 and set the IP's for the PC and the NAS in this range accordingly?
https://www.downloads.netgear.com/files/GDC/XS708T/XS708T_XS716T_IG_EN.pdf
I can see that the NAS connection on the switch is green and looks like working although I haven't tried to transfer anything to it yet as I can't get the Windows PC to connect to the switch somehow.
The switch comes as default with 192.168.0.239 IP address with subnet 255.255.255.0 and 192.168.0.254 gateway, I have left it as is and set a static IP for the NAS in the 192.168.0.x and the same for the PC for the intel x540's.
I have disabeled and re-enabled the x540 on the windows PC, tired a different cable without success, should I maybe have reconfigured the switch to be in the same IP address range of my home network 192.168.1.x and connected the xs708t to the home network switch Netgear GS724TV3 and set the IP's for the PC and the NAS in this range accordingly?
https://www.downloads.netgear.com/files/GDC/XS708T/XS708T_XS716T_IG_EN.pdf