Search results

The 200 series defaults to a lower performance SDR and so that "standard" is not as bright, "Deep level" power savings is the default and there is a warning / acknowledgment that comes up after the 2nd or third full power cycle after a firmware update. Again these can be changed regardless of...

They pulled the 210, however it is not an improvement on the 103/203 (also not available). 103 Recommended. 100 series does not have the power restriction / warning of the 200 series (USA due to California) here are all 4 files sir, flash at your own risk

Sir, compared to its equivalent nv a6000 etc cad, the 4090 FE, for what I do, is close to equal, throw in a HUGE PRICE difference, and I can get 2x 4090 FE for about 3,160 dollars a pair, and get 190% the performance of 1 single highest class DC GPU from nv... of the stratospheric pricing...

Hi, well.. it is my personal home PC..... However when I'm not gaming, doing emails, or surfing the web.....: ...I do my research in medical imaging, work on nuclear isotopes, support multiple sites remotely, work on my post-doctorate endeavors, do CNN algorithms for K-space reconstruction...

Hi actually did an upgrade in May , I'll post pictures soon new specs: 2x 4090 RTX Founders Edition 2x AMD 7773x Epyc (2x 64/128 cores), Gigabyte MZ72-HB0 Dual socket motherboard version 4 1 TB RAM DDR4 ECC LRDIMMs 1600W digital power supply (Data drive) Raid 0 Micron 9300 Max (15.4TB...

The incompatibility/sensitivity issue also occurs on 4090, RTX FE and others. So, in many different configurations, its seems an issue with the monitor firmware. The issue manifests also with the 4090 rtx series. Findings so far: The monitor will post almost every time for bios IF the monitor...

Sir, IF I was going to buy 2 3090s I'd shoot for identical to avoid nv link misalignment -obviously I know you know this. IF getting a swap / return done for identical is not possible, you could mount them both in a small mining case (50 bucks on amazon) and force the alignment with brackets or...

Thank you, it was a lot of modifications just for the clean and quiet

As long as the operator is capable probably so. ;)

If the application can do it, then yes, independent of any sli/nvlink system flag Otherwise, no, unless it is explicit multi gpu here you go: https://gravitymark.tellusim.com/leaderboard/

There's been a few updates.... please see here if it tickles yer fancy. https://hardforum.com/threads/dual-4090-dual-xeon-1-5tb-ram.2023018/#post-1045492804

So I received the modDIY power cables for my 4090s. configured with 600w full power each, the corner / bend of the cable happens easily just from gravity. Cables (without sleeving) feel (compared to sleeving) light as hair and just as flexible. No stress on the 4090 sockets. I was going...

I posted this in the other two forums, but Hard OCP has been my home for a long time, for me it was alsways HARD OCP and NVNEWS The specs: 2x 4090 RTX Founders Edition 2x 8280L (56/112 cores), Asus c621 Sage Dual socket motherboard 1.5 TB ram. DDR4 ECC LRDIMMs 1600W digital power supply (Data...

Asus pulled the 107/207 update from their page, now only update available is the 106/206

Ok sir, I stand corrected, thank you

Thank you, maybe the spec allows it, but what monitor has 10 bit 144 on DP 1.4 DSC?

Hi, in 3 different high end monitors asus PA32ucg, agon/Porsche 4k, and the asus PG32UQx, the 144 output on DP is 8 bit. on each one go to "info" in the osd, check yourself. The image on the screen is also 8 bit. You can get 144/10 bit in hdmi 2.1, but those three monitors will not do it in dp...

So, this 107/207 stiks, a lot of halo and other issues, I went back to the 103. 103 is brighter, better colours, no halo, and less issues/ Asus, what are you doing with 104,104,106, 107????? regression??

please provide feedback, I'm hesitant, the last batch (106) almost made the monitor a paper weight

Links are gone, but I have it. I couldn't figure out how to attach it to this post, PM with a real email address and I'll send it to you Standby, I think it attached this is 103 for PA32UCG

Thank you, I had not considered that

No magic powers. And I don’t have 4 of the Ti s One Ti bought from Best Buy One, Ti I had my fiend get from Best Buy (yes I payed him) one Ti I bought new from eBay for about 200 more than retail from someone that was waiting for a Best Buy order fulfillment because I thought I’d just put...

I am getting between 68-119FPS at 4k, with most max settings. I also load straight from the exe and not use the client. (Its not SLI )

display stream compression (DSC) is part of DP 1.4. In the monitor, no in the OS or control panel, but in the monitor OSD - select display port in the menu (not in the input select), there is a submenu for DP 1.1, DP 1.2 and Dp1.4. select the DP 1.4 - screen goes blank and return about 1-3...

yes sir, that is correct. The basis is that DP1.4 DSC is maxed on data stream so 144hz is capped ay 8 bit (FRC), I have seen drive versions show it and some drivers allow it, but the monitor output at 144 is actually 8 bit. I tried to post an image her that helps but it won't let me due to...

thx, fixed

I am not impressed with what I have gone through..... Monitors I am using, have used Asus PA32UCG, PA32UCX, PG32UQX Porsche Design PD32M. Results *PA32UCG - best of the 4, but still has issues. HDMI 2.1 may cause no boot screen/bios, mostly only works after windows is booted. Any firmware...

not sure what "negative lod bias" has to do with RDR2 version 1436

Hi i have had 3 of them. 2 RMA back , 1 came back worse than when it left and only one ran without issues. I had to go to firmware 103/203 to get rid of the blooming issue and get better response. the 104/204 105/205 and 106/206 have all terrible color and blooming that calibration can't fix...

No sir, I don’t have those games

Interesting and logical factoid I repasted the cards with kryonaut extreme, the overpriced pink. Which improved temp performance by several C as you know all the vram on the 3090 ti is on the same side as the gpu and I re-padded the vram as well so: —> now, when the gpu is maxing out temps...

OK …. It’s a TT P1 case, sold as SFF…. I merely stretched it‘s capabilities out a little

I thought you'd like to see some naked pics (of the 3090 Ti)

yep, both. However, my PC's duty cycle is mostly my dissertation

I miss the look of 4 video cards....

Lol Its a 32 inch 4k asus PA32UCG with 1152 lighting zones, you've set a new standard if that is small. I tried the various different available coolers and orientation, this final version had the most amount of cooling. Again under max load the CPU's never go higher than 47C, and idle in...

I think SLI is rather dead, the change now is apps and games that are specifically written to be multi GPU, not anything less than complex. The DX12 magic bullet of mgpu didn't really take hold. Vulkan scales much better than DX12 and seems better embraced in many indie developments. With that...

I had to resort to make custom cables, designed and built for the 3090 ti, after prototypes, I'm having a batch made, delivery in a few weeks Does anyone else need cables for type 4 interface / PSU? I can add more to the run.

Hi so I wasn't happy with the temps. I re-padded and repasted both 3090 ti cards. I used the gelid pads and I used the pink kryonaut extreme. It will need a few days to settle down but it seems to be about a 7C difference in the ram and about a 2C difference in the GPU/GPU hotspot. On the 3090...

some of my other builds over the past 22 years, in no particular order