Search results

I need to be able to creat variable variable named sessions. So basically $curdev = "device".$_SESSION['HTinfo']->numdevicesused; ends up being "device1", "device2", etc. If i echo it, it displays the correct name then I assign information to it with $_SESSION[$curdev]->thing1=99...

Ive recently been learning PHP, I have used dreamweaver in the past for HTML and generally liked it, and I paid good money for it so naturally thats the first thing I went to. Ive found it to be decent but wondered if there was anything better out there? Im willing to spend some money if its...

I was reading the article regarding IBM warming up to AMD linked from the front page. http://news.com.com/IBM+warms+to+AMD+Opteron+servers/2100-1010_3-6066330.html?tag=nefd.top I was under the impression that IBM has worked closly with AMD for years, in fact I beleive they even provided...

ok so I saw a 3000+ for a good deal ($150cdn) so I figured what the hell id pick it up, id been disappointed my 3200+ and other 3000+ could only hit 2.6ghz. If it didnt oc any better im sure I could sell it. Anyway it was a weird stepping Amd Venice 3000+ ada3000daa4bw LBBWE 0603 dpmw...

Well after weeks of being too lazy to install my A64 waterblock I finally got around too it. Having some problems with either the motherboard or memory controller so memory isnt up to par right now. Heres a teaser though http://valid.x86-secret.com/show_oc?id=42036 not a stellar chip...

Alright im definitly in need of guidance here, ive spent a good two weeks trying to get this ram stable, but I dont think its the ram holding me back. When if I first put it in it would do 215fsb at 2.75v (neo 2 bug lowers vcore .1 when using cas2). However upon using any memory dividers it...

I just purchased a OCZ 2x512mb PC3200 EL GOLD kit from a local retailer. Upon receiving the kit one of the sticks was DOA, retailer didnt have any more for a week so I called OCZ. I called them around 2pm on a monday, tuesday at noon I had my new ram in my hand. Thats pretty impressive. So...

http://securities.stanford.edu/1035/ATYT05_01/ Well apparently the problem wasnt only with the guy in charge. This is not looking good for ATI. All I want is an RV520 or RV580 to play with damnit :eek: and the ATI sub-forum will remain a ghost town for a while longer it seems....

I bought some corsair ram it was doa, got it replaced and the new ones doa too.(tried in countless mboards its the TCCD stuff I dont have it infront of me right now to tell you the model, it doesnt matter its going back. Now I need to make a decision OCZ Rev 2 Platinum 2x512mb (TCC5) or...

Alright I got this shiny new x850xt here that doesnt OC as well as my x800xt did so its time to feed this thing some volts. Anyway happen to have a good volt mod guide? Ive only managed to find one and I seemed to have lost it. The card is a BBA x850xt (non pe) and the stock voltage...

I figured id pass this off to anyone thinking about or who current owns an OCZ power supply. My modstream 520watt recently died after 6months of use(cant figure out if it just died or the doa K8n neo 2 took it out). Upon contacting RMA, the person on the other end of the phone was very...

Alright after a Maze4-GPU block leak problem, my x800xt is dead (:sob:). Anyway now its time to replace it, im going to go PCI-E because I really dont want to change motherboards until ATI-Crossfire is available (atleast so i can compare to sli). So it has to be AGP. Now being the resourceful...

Im looking for some ram thatll do as close to DDR600 speeds I would like to keep timings around 2.5-3-3-6. From what ive seen BH5 will do high clock speeds but only with insane voltages. my motherboard is a K8n neo 2 platinum so its limited to 2.85v unless I get a DDR booster, but id perfer not...

Got lazy when installing my new AMD Venice , my waterblock hasnt arrived yet for it so im using stock air for now. I thought my waterblock would be here by now so i just used the thermal pad on the bottom of the AMD heatsink. However just found out my waterblock is going to be a few more days...

Finally decided on purchasing a 3000+ venice until the x2s drop a little bit. Damn this oc's nicely, still waiting on my water block conversion from p4 to a64 so this is all on air and stock air none the less. A64 Venice 3000+ 0520 2x512mb Kingmax PC4000 DDR @ 500mhz 2.5,3,3,6 1T MSI Neo 2...

Alright so it seels like AMD is releasing a hell of alot of new cpus lately Im aware of the differences in Sandiego and Venice as opposed to the previous clawhammer, newcastle and whinchester. Its the mobile chips that have me confused is there a benefit to purchasing a newark core over a...

Ive seen alot of IC7-G users, with prescotts cap out at 240-250fsb, but ive also seen this board doing 300+ FSB without mods. So yesterday I did a little research and went around and looked at what processor different users were using and looking for anything that may lead to a better...

Ive been getting into Solidworks alot lately, and well it runs pretty well on the system in my sig, I just found out because I dont have a workstation graphics card (although I have an x800) opengl is limited to software mode. So im losing a large chunk of my performance. now my question is...

Alright its time to upgrade my p4 and I was really looking forward to getting an athlon 64 venice core, but then the donathon came out of nowhere for the desktop. Im not a noob so ive pretty much narrowed it down to two choices. Athlon 64 Venice Core 3500+ MSI NEO 2 Plat or DFI S939 AGP...

I keep hearing this is going to be released but doesnt make much sense for DFI to release it now with PCI-E being all the rage. Ive been holding off waiting for the Venice core, and now that thats just around the corner I have to start worrying about motherboards, DFI would be my first choice...

Well looks like the era of dualcore is coming Unreal Engine 3 is set to use threads to allow it to intelligently take advantage of Dualcore CPUS and next-gen consoles. This is a major start in the right direction hopefully more developers will follow suit...

Almost done building it down to a few things 1) Paint Radiator 2) Clean wires 3) Finish Case Window (this will be tonight) 4) Finish Lighting and associated wiring 5) Make cover for HD/Pump section 6) Drain and replace liquid, didnt like the way it turned out with the dye i used...

It was very odd my system drops around 6000 points when I install the cat 5.1s System is as follows Intel p4 [email protected] Abit Ic7-g X800xt oc'd went from 257xx to 195xx figured it was a bad driver upgrade to I reinstalled windows xp, and then the cat 5.1s, same score. So i used driver...

Alright my system is as follows DangerDen Dual 120mm Heatercore with 2 Shrouds and 4 evercool fans Swiftech MCP650 DangerDen TDX 478pin DangerDen Maze4-GPU HDPE Resevoir 1/2" ID Clearflex 60 tubing its cooling p4 prescott 478 2.8e @ 3.6e @ 1.53v Abit Ic7-g Radeon x800XT 570/580...

Well figured id give everyone a good laugh. I was screwing around with my powersupply wiring and I removed a few of the molex connectors to change them. Well apparently its not a good idea to try and watch The Apprentice well putting molex connectors back on. So not even bothering to check...

http://www.trust.fr/products/product.aspx?artnr=12950&show=1 Seems like thats what it means when it sais Anyone have experiance with it?

Im loking for the screen dimensions of the PS-ONE LCD thinking of putting one into my case but just want to make sure itll fit. I need the dimensions of the screen itself and then the total overall dimensions Thanks in advance

Alright my very long project is almost nearing completion, down to installing wcing gear and cutting a window, now heres the problem. I cant come up with a window I like. The case is a Silverstone TJ06. http://www.silverstonetek.com/products-tj06.htm the wind tunnel has been removed...

Everyone remember those chenming/cheiftech cases that had quite a few variations by a few different companies. looks like were going to see the same thing with the TJ06 Aerocool http://hi-techreviews.com/nuke/spiral_galaxy/spiral_galaxy_page3.htm Enermax...

I havent heard a whole lot about this power supply in terms of reviews or actual on hand experiance. I was going to go with the neopower but availablity in Canada right now is sketchy. This is a GREAT power supply but just to forwarn people it does have a few issues. 1) Cable length -...

First of all this is not about my personal SLI system, as i dont have one but rather a discrepancy between T-Break.com and hardocp.com In a recent HardOCP article regarding sli there was a comment regarding games supported however on this T-Break Article they use Chronicles of Riddick as...

I just received a MCP600 and MCP650 both of these pumps have extremely long power wires. Im spending alot of time and money to modify a case to hold this wcing system so this is the last thing i want to look at. I am comfortable with cutting the wires and putting a molex connector on. However...

Ive had this 478pin C0 stepping prescott 2.8e for awhile. Its always done 33xx-34xxmhz at 1.5v recently because im planning on buying an athlon 64 ive throw caution to the wind and bumped it up to 1.55v this allows me 2500mhz stable with prim3 95 and temps never exceed 52c on an ABIT ic7-g(not...

I was under the impression most modern 775 boards would work with dual core chips with a simple bios flash. However this doesnt appear to be the case http://www.gamespot.com/news/2005/01/06/news_6115913.html for the lazy

Alright new Watercooler is all installed now just before i was about to put in the tubing I ran into a snag. Im going to be watercooling the following P4 [email protected] Radeon x800 XT OC'd Northbridge using Double Heatercore with 2 evercool 120mm fans @ 12v Swiftech MCP600 or DangerDen D4...

Just got most of my WCing gear in, now the tube going from my rad to my pump is going to a pretty sharp bend if i place the pump where i want too. Now the way i see it i can do one of two things 1) http://criticool.com/images%20small/Fittings-poly%2012%20elbow.jpg these will work and allow me...

Ive been searching for a couple of weeks for an authorized dangerden resseler in canada, I refuse to deal with bigfootcomputers after some of the past experiances ive had with them. Dangerden doesnt seem to list available resellers anywhere on their page. In particular im looking for their D4...

Just slapped in my new x800 xt and was giving it a little test run, first i oc'd it to 550/550 and it took. 3dmark2001: 24500 (1500 points more than my average 9800pro oc'd to xt and beyond) 3dmark2005: 5995 (up from 2900 with my 9800...........) halflife 2 is now sitting at 1280x1024...