Search results

Jailer - That appears to have been the issue. I went to Cloudflare and created an account which gave me access to their nameservers. I then went to Namecheap and changed the nameservers to theirs an I haven't experienced the delay since. And have tried my sites probably about 150 times since...

Got it. Thanks.

What I was asking is if you say their DNS servers are not good, then does changing the nameserver in my account to, say Cloudflare's, fix the issue or is there more to it than that and I would need to change DDNS provider to get off Namecheap's DNS?

So I don't need to change DDNS providers, just change the nameserver on Namecheap? Why those addresses for Cloudflare. Aren't they 1.1.1.1 and 1.0.0.1?

Biznatch - is this what you're talking about: https://flic.kr/p/28TQigW Sorry for the link. Can't seem to figure out how to post pictures here.

Maybe I am doing something wrong, but I enabled Develope mode in Chrome and I don't see anything different and when you say private tab do you mean an incognito window in Chrome? Either way I tried what you said and I can't see where it shows the calls it's making.

My ISP won't do static IPs for residential. How do you go about switch DDNS providers? Would I have to transfer out of Namecheap or something? Also, Namecheap has a Nameservers section under my domain and it is currently set to Namecheap BasicDNS. There is also a custom setting that when you...

So it doesn't like another server block there but then how do I set the server_name as emby.myserver.com? The top line is 54: https://1drv.ms/u/s!AjVnhushK5VlgYwzAF3aWAdIFxdKOg

I tried that and here is the response (can't copy and paste): https://1drv.ms/u/s!AjVnhushK5VlgYwxKAfK-ffnO4sjWQ

That yields an error: Failed to connect... I think the issue is that 127.0.0.1 is the local host and does not host the NZBget (6789) container. The server that does host that has an IP of 192.168.1.42. If I try curl http://192.168.1.42:8096 I do not get an error, it just returns to to the...

My question is how to add subdomains to the config in that guide which uses subfolders.

You suggested that I try to setup nginx on a separate machine and not running it in Docker. That is what I am doing. I just assumed that since I am now running nginx outside that Docker environment that the resolver wouldn't work. I thought that was specific to their Letsencrypt/nginx Docker...

The problem (I think) is that the previous system did things very differently. The new guide I am following puts everything in one file whereas the previous setup broke it up across 2-3. So I am not sure how to extrapolate the info and process it correctly. Plus the previous method was using...

I am trying to setup nginx and Letsencrypt on an Ubuntu VM runnning on my Windows 10 desktop. I am following this guide: http://tinyurl.com/y7zxg4jb I got it to give me certs for all my subdomains but the guide is for subfolders, not subdomains. So how do I alter these sections for my...

I appreciate the help! Maybe it's a bug, but many users are using it the same way I am with nginx in a Docker. A few even report that they are running production websites this way. That bug report does not mean it's an actual bug. IN fact it hasn't even been labeled a bug yet. I'll keep...

Yes.

Yes.

A lot of that is over my head. Not sure what port mapping is in nginx. I know there is supposed to be a way in Unraid to give each container it's own IP but I'm not sure how to set that up. It would eliminate the need to specify ports if that's what they are talking about.

I added ipv6=off to the resolver line on both my NZBget and Sonarr configs. The Emby config doesn't utilize the resolver. Still have the delay on all three sites.

My router is pfsense running on an old computer. I have rebooted it numerous tomes during this ordeal. And remember, while you are suggesting running the same server setup on on a different system, I have essentially done that. I rebuilt my server this past weekend with new mobo, cpu, ram...

Do you want the actual nginx.conf or the nextcloud file in the site-conf folder? The excerpt you quoted is from the nextcloud file, not the nginx.conf.

I used the open port method for years. It worked fine. I set up Letsencrypt and nginx to close those ports and have a more secure server. Yes. I still get the delay after doing this.

I'm confused. I thought the whole point running a reverse proxy was so that all traffic came in over https and that you could close all your other ports?

I changed my host file so it now reads: emby.myserver.com 192.168.1.42 nzbget.myserver.com 192.168.1.42 sonarr.myserver.com 192.68.1.42 I then rebooted and flushed my DNS cache. If I type emby.myserver.com:8096, nzbget.myserver.com:6789 or sonarr.myserver.com:8989 into a...

I'm not sue how much you know about Unraid and/or Docker, but Unraid is a NAS software that has Docker built in. With it's configuration, all the Docker containers share the same IP as the host (Unraid) so the port is crucial for directing to the proper container. Three of the Docker...

Except that above I said: " I went and edited the host file again so that sonarr.myserver.com was directed to the IP and pot for NZBget. I then rebooted and typed sonarr.myserver.com into both Chrome and Edge and it still took me to Sonarr." So it didn't seem like the host file mattered.

Namecheap is my domain provider. I just looked and the name server is set to Namecheap Basic DNS. The other options are: Namecheap Web Hosting DNS and Custom

No I haven't tried another machine or setup. I don't have an easy way to do that at the moment.

Yes, I have rebooted the server. In fact I just rebuilt the server with all new hardware. I started out using CyanLabs guide (http://tinyurl.com/ydg8n5ph) and couldn't get things working. So I deleted and reinstalled and used the Linuxserver.io guide (http://tinyurl.com/y7xxtw6y) as it was...

Don't have a Linux computer but the problem also happens on my Android phone. Another odd thing about this is that sometimes (like right now) it doesn't do it at all. No matter how many times I navigate to all my sites they load as expected. It's rare that it doesn't do it at all though...

I just tried Edge and get the delay with it also. Again, not always, but sometimes. One thing though. I went and edited the host file again so that sonarr.myserver.com was directed to the IP and pot for NZBget. I then rebooted and typed sonarr.myserver.com into both Chrome and Edge and it...

I added the following lines to my host file on my laptop: emby.myserver.com 192.168.1.42:8096 nzbget.myserver.com 192.168.4.42:6789 sonarr.myserver.com 192.168.1.42:8989 I then rebooted my laptop (couldn't remember if I needed to or not). I still sometimes have the delay if...

Because ultimately I need things to work right over the internet. If it weren't for that, I wouldn't have bothered with any of this and just used the local IP.

I run an unraid server at home which runs a bunch of Docker containers. I recently set up Letsencrypt and nginx as a reverse proxy so that I can securely access some of my containers (Emby, Radarr, Sonarr, NZBget, Nextcloud and a few others). I purchased a domain through Namecheap and use...

I've been having this problem for a long time and I'm fed up and would like to fix it. I have a small network at home comprised of my desktop (Win8), laptop (Win7), 3 HTPC's (Linux) and my ESXi server running a handful of VMs (Win & Linux). My problem is that the Linux computers often do not...

Glad to hear you got it working.

My problem was that my computer wasn't recognizing the SAS card and therefore not seeing the drives attached to it. I was getting a BIOS error (card BIOS, not motherboard BIOS) that would cause the card to not be recognized at boot. I would get the errors on some boots, but not others so a...

As I said I can browse to them by typing \\ComputerName. My problem is they are not all showing up under Network. It's been my experience that if the network computer/share doesn't show up under Network in Windows, it also won't appear as a location in applications. And you usually can't...

I am having a problem where my Windows computers are not always seeing all the network shares when I browse my local network. They usually all see each other, but quite frequently none of them turn up my Ubuntu, unRAID or FreeNAS shares. One day they all show up, the next they don't. I can't...

I don;t remember where I found the first one. I was searching the net and trying whatever I could find. Ultimately, I don't need that one to make it work. The second one I do need to make it work, and it's the only tunable I am currently using, and I found it here...