Search results

Up to 50% off games in their catalog. https://www.origin.com/en-us/store/deals/sale/holidaysale-actionweekend *EDIT*--GreenManGaming has it for $10.19, activates through Origin

In the drivers there is an option to set the default PhysX card. Choices are my 580, the CPU, or automatic. It defaults to automatic, but I am trying to decide if it would be better to set the 580 as my PhysX for everything. I would think in most cases it would be faster than the CPU, right...

I have been longing for a bigger case for many months now, and I was set on the Cosmos S for my next system. However I recently found out about the 690 II and now can't decide between the two. I currently have a Antec 900 which was pretty crowded in my previous SLI setup. I am back to one card...

I am trying to setup multi monitor between my 30" Dell 3007WFP-HC and my 24" LG L246WP. I am only running a single 285 GTX and I can get them both to be on, but the LG doesn't fit the screen properly. For example, it is set to use 1920x1200 (native resolution), but I have about an inch on the...

Hello everyone, I was disassembling my system today and I happened to be cleaning up my processor when I noticed it had a funny dent on the left side of the heat spreader. I don't remember this being there when I first got it, and I am wondering what I can do about it. Clearly the seal...

Can anyone actually explain what this is? :confused: It looks to be like a credit card, but they don't actually say that. What I want to know is, if I sign up for this to buy a nice big 30" LCD from them, can I pay it off all at once when the bill comes or am I actually signing up for monthly...

I am trying to find a nice spacious case for all of my new parts. I am going to have a X6800 with dual 8800 GTX's. I really would love to get the Antec 900, but I really think space will be an issue. In addition, I am getting the PC P&C Silencer 750 quad power supply, so I probably will have a...

Anyone else used them? Any feedback? I found them today and started using them. I don't overclock, so I might not notice much change. But one thing I did notice is that it seems to be undervolting my cpu even more. I have not hit 1.5v on this, measuring through cpu-z. It fluctuates from 1.45...

Well I have the old 3500+, the non-Winchester and I idle in the low 40's. I constantly hit upper 50's and even hit 64 one time in a game session. I am very concerned about this. I used to jump to 60C almost immediately whenever I started gaming. So I decided to try and reseat the proc in case I...

When I got my completely new system back in September, my 3500+ was idling at 42-44 C. It would get up to 50-51 C under load. This was with a retail fan and no OC. Now in the cool winter months it idles at about 50, and hits 62 under load! The temp sensors start going off and want to shut it...

I cant seem to unflash my bios. I created the boot disk through the format option, and included the AWDFLASH and 1.1 bios on there. Upon attempt, it says the flash bios is write protected. However, there is no option in the bios to disable this. I updated to version 1.2 via LiveUpdate, but I...

Help! I have been trying cool my system, and initially I was using the CoreCenter and making use of Cool N Quiet. I did not turn the option on in my bios, as I did not want my processor speed changed. So by doing it in CoreCenter it auto adjusted my fans based on temp. Later, I was told that...

After upgrading my bios, I think temps seem more normal now. (41c for system and 46c for cpu) However, I did notice in the bios they have an option for smartcpu fan target. I could set a value in here to have it determine the fans speed, or I could let CoreCell do it. My only reason for not...

I am a little confused on flashing the bios for my K8N Neo2 to fix temp reporting issues. On the websites how-to (http://www.msicomputer.com/support/BIOS_award.asp) it makes it sound like you would flash from a floppy. But when I downloaded the bios, it also had a readme that specifically said...

My network light usually shines green when the cable is plugged in. But occasionally it has been flashing orange, or even orange and green. What does this mean? Is it some sort of error code? Is it maybe a way to contact a superhero, like Batman? Although we might have to call him orangeman, or...

I have a rather silly question. When I go into my system properties through Control Panel, the computer specs are listed as 3500+ 2.21 Ghz, 512 MB of Ram physical address extension. Now what is this? Does it relate to being able to access larger quanties of memory (>4gb?). I have never seen...

I was wondering if there is an alternative slot to install the CD-in from my drive, since that one is too far for my cable. (Not to mention is stretches across the whole board!) I have both a DVD and CD burner, and I would like one to be able to plug in. And I think the DVD needs the line to...

After my long ZipZoomFly rant, my processor finally came. I was able to set it up last night, and everything works great! No hardware incompatibilities at all! I was unsure how the motherboard would be, being it is a first revision, but it is holding up so far at stock speeds! My 3500+ is...

This is a copy of what I sent to their complaint dept, I am just a little mad right now. "I just want to express my disappointment with the service of your site. I have bought from you in the past, all without a problem. But my most recent order has changed my whole image of ZipZoomFly. I...

I am hoping to purchase a 3500+ here in the next week or so, but I am having trouble deciding between the two chipsets. I have been using the Nforce2, but Nvidia drivers have been less than optimal. High cpu usage for the network being a common problem with NF2 boards that comes to mind. Anyone...

Will there be a noticeable difference if I get the lower clocked 3500 with a gig 'o' Corsair value RAM, as opposed to the faster 3700 with 512 MB RAM? I unfortunately can't swing a 3700 and a gig of RAM, so I sacrifice :( I am sure both will be blazing fast, but I want as much blazing as I...

Since this post did not get any replies in the actual display section, I will ask it again here. I am a little confused on what to purchase. I don't know what really is good, and after only having a Compaq monitor I need a change. I am looking to spend $100-150. I will be using it mostly for...

Hey guys, I am looking to spend $70-90 to get my brother a graphic card for my current system. (I am taking my 9800 Pro for my nice new A64 system!) I am curious what would be a good performer in this price range. He would like to play HL, MOHAA, RTCW, and some of my newer shooters, such as Call...

I am going to buy some Corsair 512MB Value memory, and it has two different ratings. A CAS of 2.5 and 3. It will be for my upcoming system which will run a MSI K8N Neo Platinum, A64 3700+, 9800 Pro, and no overclock. Does the higher rating give a little better performance, or affect stability...

I am a little confused on what to purchase. I don't know what really is good, and after only having a Compaq monitor I need a change. I am looking to spend $100-150. I will be using it mostly for gaming and watching movies. However, being able to read word docs on it is a must. What brands...

Is it decent, at least to semi-play games? I imagine it is a DX9 card, but performance I can only wonder. I would hope DX8 games would go smoothly with the XP2400 and 512 PC2100 RAM. It will be for my bro, cuz I am taking my 9800 Pro for a new system! So I am not looking at spending alot, just...

What is the main difference between the two? I am looking at buying a pre-built system that uses them. A HP system has the Nforce 150 with a 250 Watt supply, and Compaq has the 250 with a 400 Watt supply. Is there a power issue with the 250? Also, are the Nvidia drivers for these buggy? My...

Ok, I need the low-down on this processor. I know it is socket754, with 1 MB L2 cache. What I do not know is - 1. Does it require registered or special ram? Normal being unbuffered, non-ECC. 2. Is it dual channel? -------Does running two sticks hinder performance if it isn't dual channel...

In a related post (see http://www.hardforum.com/showthread.php?t=781579) I am trying to determine actual Windows performance on the A64 chips versus the Intel. My current setup seems to lag in Windows, where my old P3 667Mhz ran good. That was in Win98 and ME, so that explains some of it. My...

I am going to get a new system at the end of August during pricecuts. I had a 667Mhz P3 in the past, and have my current AthlonXP2400. The Intel always seemed much more zippy in Windows tasks, where Athlon dragged. Gaming clearly was better with the new processor, but thats mostly due to the...

I am new to the Intel scene (AMD last two boards), and was curious on the power connections to the motherboard. I read somewhere that Intel boards/processors require special power connections. Is this true, and if so what do they look like? I have a Allied AL-A400ATX (400 watt) power supply...

I am looking to get: Intel 3.2C processor 512 MB PC3200 RAM Audigy2 ZS 80 GB hard drive monitor, speakers, keyboard, mouse, etc Basically an entire system, all for around $1200. I only found a select few vendors that semi-matched this (Compaq,HP,Dell). I could not get a 3.2C anymore...