Where in Canada do you live exactly? I am in Southern Ontario, and while a UPS is more expensive than the US, it's no where near $900.
What are you running that you need such a high capacity setup? Have you considered Colo? A UPS isn't meant to run for hours. As mentioned before...a...
Not sure I still get the point of all this...
You mentioned your reason for going with an automotive battery was to save cost. I don't see how the cost of inverter, acid drip trays, shelving, hydrogen monitoring, etc. can cost less than a new or refurbished UPS. Especially taking into...
This is where I get confused...
Can I not have a management VMkernel, for connecting to ESX on my 192 network?
Actually the greens are working great. No issues. All NFS shares are on the blacks....
Hello,
I have the following all-in-one setup:
Supermicro X9SCL
Xeon E3 1230
16GB ram
Perc 6
2 Arrays
4 x 1TB WD Black
3 x 2TB WD Green
Open Media Vault VM with the Perc6 passed through directly.
2 networks:
192.168.160.x - vSwitch0 - General network - 1 Intel NIC...
Did you have any problems with Openfiler?
I am running 2.3 w/ NFS & ESXi 5 and get constant disconnects or 'pauses' in my VM's.
I like the interface of Openfiler, and the fact that it's linux.
I don't like the slowness of CIFS on FreeNAS, and don't need ZFS, but the problems with...
Sorry for the repost of image, but does anyone know where to get the cable management that Krazypoloc is using....cheap? I can't seem to find anything.
If you have THAT much logging going on, and aren't concerned about losing them, why not have logs write to SSD?
Keep the OS on the disks like you mentioned, and keep your hosting data on an array as well.
So
Port 1 - Array 1 (Raid1) - OS drive 7200rpm sata
Port 2 - Array 1 (Raid1) - OS...
I naively bought a H67 board, which supposedly wont work...so I probably wont even try. Even Intel reports only one of their P67 boards supporting vt-d.
sigh...
He's bang on. I didn't want to say anything to get you discouraged on your first project. IMO running ESXi on that box will only make things worse. The overhead is too much for it to handle.
Take some time, put together a detailed quote and proposal, even explain to them what everything is...
I'm looking to encrypt my FS volume with either luks or truecrypt. Will the VM be able to take advantage of AES-NI support from the CPU? I'm trying to keep the overhead to a minimum on a ESX test box, while keeping power to a minimum as well.
Maybe raid 10 with two partitions, one for OS, one for logs. and raid 1 the two raptors for your datastore. If you outgrow it, you could always create a new datastore/partition on your raid 10 array....
Will sell for $500 OBO.
The card was decommissioned because we were standardizing to dell, but is in great working condition. I will include cables. No BBU.
Heatware is: http://heatware.com/eval.php?id=22260
Ebay is: scootbmx.
Same as this...
I think you may be SOL.
You're most likely missing a card.
The bigger issue may be not having hard drives. Usually you need dell (emc) specific drives, with dell (emc) firmware on them.
The only reason I went with switches was because they were cheaper than transceivers, and I needed a switch there anyways. Either will work, just depends what you find I guess.
If you find 2 switches with mini gbic ports (like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16833124077) and some sfp modules (like this: http://www.newegg.com/Product/Product.aspx?Item=N82E16833118088&cm_re=sfp_module-_-33-118-088-_-Product).
Buy LC-LC fiber cable in the length...
I have a tyan 2466. 512mb of ram, no cards installed and a xp1700.
Enermax 430w = no post
Enermax 430w = no post
Enermax 300w = no post
Enermax 300w = no post
Aopen 300w = Post
No Name PSU 300w = Post
Powerman 300w = Post
Why is the board posting with the cheapest power supplies I...
Replace the NIC cards. I stumble upon situations likes a lot, especially in the summer due to thunderstorms. Nic's are very sensitive to power fluctuations.
Like I originally said, I don't know what A.D. is. This had been cleared up earlier. I then asked if it was similar to OpenLDAP. Thanks for clearing everything up guys.
I'm having the same problem with a Epox 9NDA3+ NF3. I havn't tried in single channel, but dual channel will only work if the computer is powered totally off for an extended period of time then slowly it gives me a memory boot error. I am about to RMA my board, I was possibly going to get a DFI...
How big are the files you need to backup in total?
Just backup daily to a DVD-RW and replace monthly.
Raid1 is good for redundency but is not a backup.
Ok. I think i just got desperate and bumped the memory down figuring that was what was holding me back. Erm, don't know what I was thinking.
Ram is back to 166
Newest Settings:
CPU: 2577.27
HTT: 257.73
Memory: 214.77
Memory at 5266MB/s now in sandra.
What should I put my memory...
My Ram is set to 133 in the bios, Is this what you are talking about?
Even at stock settings, it runs a little bit faster closer to 5000mb/sec.
I appreciate everyones help so far.
Heres me setup
Epox 9NDA3+
AMD64 3200 Winchester
OCZ 2x512 3500EL (one stick is questionable, reports as 2700 in cpuz. OCZ and people say thats normal)
ATI 9600XT
Right now running
HTT: 260
HT: 3x
CPU: 10x
2.7v memory
AGP: 67
memoy:
Cas: 2
Ras to Cas: 3
Ras precharge: 3...