Search results

Here are the voltages in my sensors. The 12V seems awful low. Voltage Values: CPU Core 1.210 V CPU VID 0.825 V +3.3 V 3.248 V +5 V...

Installed a MX500 M2 SATA and the temps kind of seem high to me. At system idle its around 47 but when I load it can get to 60 or little warmer. Is this bad? Am I within operating ranges?

If I use an extension cable for my 24 Pin, there should be no voltage lost due to length, right? Sorry if this is a stupid question.

Currently, I am using the CAM NZXT software, and even though its ok, I would like something a little more configurable. On my old system, I was using Open Hardware. I loved it. The widget was configurable is why. Unfortunately it has not been updated for Ryzen, etc. Does anyone have a good...

Has anyone ran across an issue where when click on Restart actually shutsdown the computer instead? I have tried googling this issue, but, I find the reverse issue, where people click on shutdown and it restarts. Guidance greatly appreciated. Note: This is on my new ryzen 2600 fresh...

WTB I5 1150 socket CPU. 4440S or 4430S would be great for the lower wattage ones, but a non S would be great also.

Installing the ML120L aio onto a ryzen 5 2600. The instructions are pure picture based, showing which clamp/bracket to use, then it shows tightening the thumbscrews on each side. How much do I tighten them down? Anyone have any idea? Do I just finger tighten and then just a little more...

I will be shortening the 24 pin atx connector cable on my PSU due to itx case space constraints, causing cable management headaches. My question pertains to pins that have 2 wires combined into 1 pin. Should I twist the copper together, then crimp, or do not twist the wires together and crimp?

Looking for any 4th gen 1150 Pentium G series processer. Not wanting to spend more than 40 to 50. Thanks

SOLD SOLD SOLD Selling my GTX 770 EVGA 02G-P4-2776-KR It is a little over 1 and half years old. Great card, always left at the manufacturer settings, never overclocked it myself since it was already superclocked from EVGA. Asking $160 free shipping. Will only ship to US 48 . (take...

For Sale: 1 - 4GB (2x2GB) Kit - Patriot PGV34G1600ELK - 9-9-9-24 1.65v -- SOLD!!!!!! Patriot Memory 4GB Kit Picture 1 - Logitech G600 - $35 shipped Logitech G600 Picture The G600 is was used only for almost a week. I couldn't get my a head around on how to use it. This mouse is not for...

I have had this processor and video card for about 8 months. I never overclocked. I played a few MMO's but like only a few hours a week. Great card and great processor, I upgraded is why I am selling. I3 3225 (i have retail box with it still that has the stock HSF) - $95 shipped Powercolor...

Looking for a 3570k for $170 shipped. Can pay via paypal heatware in sig Thanks

Has anyone ever used a numeric keypad for the left hand while using the mouse with the right hand in a MMO? I am just having trouble moving my left hand on the number across the top. when I want to use a certain skill, I just never seem to hit the right number everytime. So I have been...

For sale is 1 (NIB never used)- G.Skill 8GB Ripjaw X DDR3 1600 (F3-12800CL10S-8GBXL) - done free picture hosting pic upload Only paypal and shipping is only in the lower US. Heatware is in my sig. Thanks

This is from my error logs: 03:36:37:WU02:FS00:Trying to send results to collection server 03:36:37:WU02:FS00:Uploading 635B to 171.67.108.25 03:36:37:WU02:FS00:Connecting to 171.67.108.25:8080 03:36:38:WARNING:WU02:FS00:WorkServer connection failed on port 8080 trying 80...

I am trying to register on the hardfolding site, but there is a field called Stats ID. What is this? Where can I find it? Sorry I have searched this forum and google and can not find what I need to answer this. Thanks

I am selling a brand new ocz 120gb agility 3 ssd. Never used still in the package. The package was cut open to get the upc for a rebate. I been saving this thinking I was going to use it, but, now I don't need it. Well ship free to anywhere in the continental US. Asking $65.00 Accept...

Anyone using tv's produced by Element Elec? I am looking at getting one and people seem to like them except for the sound. I was looking at a 46inch one. Just curios to the quality of picture. Especially if streaming like netflix, youtube, etc. Thanks

I don't know where else to post this. I have searched and searched the internet to no avail. Please forgive me if this is the wrong place to ask. I am wanting to sign up for Microsoft OEM System Builder program, but, I am an individual not an organization. Can I just put myself down as the...

I think I did real well with my first laptop buy. I been reading and reading these forums and building customizing on websites to figure out a nice laptop for under $1000.00 . I looked and thought real hard on the Everex XT5000T, but, just didn't feel comfortable. One night I was at...

I have a EPoX EP-9NPA3ULTRA that I can not get a video card to work. I have a nvidia 6800 xt pci-e card and I get 1 long beep and 2 short beeps when it boots and no video. I also had to replace the chipset fan as it was going out. It is after I replaced the fan that it started doing this...

Ok, I know this may sound like a noob, but, I can not find how to put shortcuts (aliases) on the desktop for OSX to websites. I searched many different ways, the only results I ever get are keyboard shortcuts. Anyone know how to do this? Thanks

I have been reading alot about this bootcamp to let you install windows xp, and I have one thing to say: I will be more impressed when I can install OSX on my computer. That will be the kicker. OSX needs to be able to install on all platforms. I have a powerpc mac mini and I love it...

I have a older computer case that is atx that I want to use for putting my old motherboard and system in. The only problem is there is no back case fan, except for the p/s one. There is really no way of modding it to put a fan in the back. So, I was thinking of putting a case fan ontop...

What is the difference between the nvidia amd/intel x16 nforce drivers and the nvidia amd drivers? I installed the nvidia amd/intel x16 drivers on my new epox 9npa3 ultra. Should I of used nvidia amd instead? Thanks

I ran into this problem with my new epox board where the usb ports don't work correctly with some external items, i.e. usb kvm switch , external harddrive. The board is brand new and has the nforce 4 chipset. It is a 9npa3 ultra. I had to hook up a external usb 2.0 hub and things worked...

I just upgraded my computer to a Athlon 64 3500+ (venice) retail processor, a Epox EP-9NPA3 Ultra motherboard, 1Gb Kingston memory (2 512's), Xfx 6800 XT pci-e video, and a new power supply. ( I upgraded from a socket A Athlon XP 2400+). After putting it together, I noticed something a little...

I just put together a system with this mb EP-9NPA3ULTRA and with ddr 400 memory.. It says ddr400 but there is 200 mhz in brackets behind when it says the ddr 400. Is this ok? Thanks

Problem with brand new EP-9NPA3ULTRA . When I hook up the reset switch it does not work. All the other leds and switchs work (i.e. hdd led, power led, power switch etc.) I have tried it both ways and no luck. Could there be something I am missing, like maybe a bios thing to turn this on...

I have an iogear GCS632U usb kvm switch. I was wondering, do I have to have video hooked up to it? Can I just use it for switching keyboard/mouse? Anyone happen to know? Thanks

I ordered a epox e9npa3 ultra motherboard and was looking on nvidia's website for drivers. There are multiple ones. Which ones do i go with? nforce 4 amd/intel x16, nforce 4 amd, nforce 4 professional???? I am confused!!!! Thanks

I am unable to find a good guide on how to install the cool n quiet for the athlon 64 3500 + Where can I find what I need and how to setup this amd cool n quiet? Also, will Windows XP install the right driver for my cpu or will I need to install a new one? Thanks

Is the 7600 gs better than the 6600 gt? They are about the same price and having problem deciding between the two. Thanks

I am looking a going with a motherboard , this one here: EPOX EP-9NPA3 ULTRA http://www.mwave.com/mwave/viewspec.hmx?scriteria=MB-BA22185 But I noticed this one for more money and they look the same except for price and the firewire which is on this one EPOX EP-9NPA+ ULTRA...

I am looking at purchasing a widescreen monitor and was wondering do all video cards support widescreen modes? I know some games do not, but, didnt know if you have to have a video card that does. I am looking at getting a 6800 xt or a 7600 gs . Would these support widescreen? Thanks

If a motherboard has a 24 pin Eatx connector and a 4 pin 12v connect, do you connect them all? Or do you just connect the 24 pin if you have it? Say if you have a 20 pin atx connector then do you hook up the 4 pin 12v? Sorry for the stupid question, but, I can not find the answer in the...

I am looking at upgrading my system. I figured out the processor I want to use, this one AMD Athlon 64 3200+ Venice 1GHz HT 512KB L2 Cache Socket 939 Processor . I know what kind of memory and video card, I just don't know what motherboard I should go with. Can you give me suggestions? The...

I am looking at upgrading my system. I figured out the processor I want to use, this one AMD Athlon 64 3200+ Venice 1GHz HT 512KB L2 Cache Socket 939 Processor . I know what kind of memory and video card, I just don't know what motherboard I should go with. Can you give me suggestions...

I have been searching and searching for a heatsink for my 9600xt and can not figure out what will work. I have a sapphire 9600xt . The fan went out in it. Anyone know of a heatsink that will work with this? I am afraid to buy some of the ones I have seen fearing they won't fit...