At the current moment I can get my machine stable with 4 gigs, but my wireless PCI ethernet card won't connect to the internet. It's bizarre, it takes longer to connect to my router, but then I can't go online.
As soon as I remove a stick, it connects to the internet just fine. What's the...
What is enabling the 2t?
I am able to get my machine stable but I have a bizarre issue...whenever I have all 4 sticks in there my wireless PCI card doesn't connect to the internet. It will eventually connect to the router, but not the internet.
As soon as I remove one stick of RAM, it...
I recently purchased 2x1 gig PC6400 OCZ ram to add to my system which already had 2x1gig PC6400 ram. When I installed it I tried to play a game and I immediately received a BSOD regarding memory errors. I used a Windows version of MemTest and as soon as I started to run it there were memory...
I bought an E300 + ECS mobo for $150 back in November. I've been using it seen and it's been totally stable.
I recently put in 2 gigs of PC6400 RAM but I had to down clock it to 5400 speeds, it doesn't like anything higher.
So totally skipping the story, I wound up with two Acer 22'' monitors, an AL2223Wd and an X221WSD.
basically I bought the Al222wd per Best Buy's $190 advertised price, and I got the other at Staples for less since I pricematched + 10%. I was excited because the X series costs more and I...
Like all the way down to $300? Any predictions? I currently have two 17'' LCD monitors, and would love to swap em both for a 24'', but at the current moment it would be cheaper to buy two 22'' monitors than a single 24''!
Should I just go with a 22'' monitor and a 17'' LCD? Suggestions...
I'm in a very similar position you are, fossilll.
I'm ready to jump on the Gigabyte 965p-ds3 (Rev. 1.3), but I haven't decided what kind of video card to get.
I recently bought 2 gigs of OCZ PC6400 ram and popped em in the ECS motherboard. It seems to run just fine when I lower the...
I recently bought 2 gigs of OCZ PC6400 ram with 5-5-5-12 latency and is supposed to run at 2.1V.
I would like to note that before I had 2 gigs of PC5300 ram and the system was running stable.
When I purchased the ram, I just popped them in and started the computer. Everything seemed to...
I recently bought 2 gigs of OCZ PC6400 ram with 5-5-5-12 latency and is supposed to run at 2.1V.
I would like to note that before I had 2 gigs of PC5300 ram and the system was running stable.
When I purchased the ram, I just popped them in and started the computer. Everything seemed to...
I bought the $150 E6300 combo and have been running it for a month or so now with no problems. I was pleased to find the mobo booted up the first time i set it up
Just to let you know I had a similar problem. I can't remember what the motherboard was, but it was very old and didn't even support USB 2.0. It ran my AMD Athlon 2500 Xp at 333fsb and didn't even recognize it lol.
When I put my 9800pro in there it wouldn't give me any display. Oddly...
sorry for the tangent, but i'm in a similar boat....
i'm currently trying to decide if I want the S3 or DS3 Gigabyte mb. What's the benefit of paying extra for the DS3?
I greatly appreciate your help. I have two NForce2 motherboards, and tested both with known working components. Using just CPU, Vid Card, and RAM I could not get either to beep at all.
I have a strong suspicion that my current PSU is bad, At the current moment I have a computer up and...
Hmm....I would like input from others on this. Is there a good chance my BIOS got corrupted? If so, how could that have happened? I actually have access to a buddy's computer who has an A7n8x-e, so I theoretically could try hot flashing. I'll have to look into this some more.
It's a loooong story, but I had an Asus A7N8X that used to work fine till my Radeon 9800 Pro decided to go out...BIOS was showing artifacts. Got a new card through RMA and the problem was the same. Went to clear the CMOS, and when I tried booting up, I never got a display again.
I decided...
That would seem really odd. My roommate has OCZ ram, and i've been running OCZ for a couple months with no hitches. Either way, i'll yank the ram from my computer at work and try it.
Well, I used another known working PSU and the system still didn't boot up. I think i'm gonna wind up just buying another nforce2 motherboard. I have no idea what happened...
Is there anything else I can check out?
Well....it all started when I started getting artifacts when in BIOS. I RMA'ed the video card, and in the between time I used a Geforce FX 5200 with NO problems. I received a new card from ATI, and I installed it only to find that I was getting a checkered display during POST.
I reset the...
Thanks guys, I RMA'ed the sucka. Fortunately ATI has a 3 year warranty on their cards, and i'm pretty sure i'm still under it.
I installed a Geforce FX5200 a friend had lying around and the system works flawlessly.
I'm sorry, I thought I had it in my sig.
Asus A7N8X Deluxe
OCZ 2X512 megs 3200
AMD XP 2500+
ATI Radeon 9800 Pro
Audigy 2
80 gig WD HD
160 gig Maxtor HD
TDK 8x DVDRW
The fan is spinning, it's stock. It has never been overclocked. I don't understand why there would be artifacts in BIOS, the GPU isn't even really used?!
Lately I've been getting random odd artifiacts in my display when I'm merely browsing online. An example would be when I scroll down a page, I would get a streak of green vertically. Well I installed a harddrive in my machine, and when I went into BIOS there were very obvious artifacts on...
Thanks, I'll be able to use those tools if I want to recover files.
These are my questions:
1. What could have caused this to happen? Is it a bad HD?
2. Is there any chance I can repair the drive, perhaps repair the partition table? I would really like to be able to use the drive as I did...
Ok I installed Windows on an old 80 gig HD I had laying around, and everything was successful. The system was working great until recently when I try to boot up the machine I would get DISK BOOT ERROR please insert bootable disk. I would then restart the machine, and then it would boot into...
Ok I installed Windows on an old 80 gig HD I had laying around, and everything was successful. The system was working great until recently when I try to boot up the machine I would get DISK BOOT ERROR please insert bootable disk. I would then restart the machine, and then it would boot into...
*update update*
Ok I got everything working for the most part, I have rotating, translating, and scaling implemented. The odd part is...when I rotate or scale, it does so using the center of the frame as the centroid. I want it to rotate or scale about the centroid of the object. Here is...
'm trying to learn graphics using Java (please don't comment on how unneccessary or lame it is) and I would like the user to click in a frame to set up the points, then when the user right clicks, it indicates that it is the last point and the points will be connected and filled in with color...
My harddrive crapped out, it's in a partition and it can read one partition, but not the other. I'll double click on the bad partition and get "This disk is not formatted" etc. Anyone know of a program I can try to use to recover the files? I try going into the HD via DOS and receive the message...