I thought about the D-Link DSL-504G
Is it a good one!? it's with a modem in it... and what about other routers of D-Link are they good?
I think I need something arround that router... not more...
Thanks.
Hey,
I have problems with my Edimax router, and I found out that the problem is because of the router, and I tried to install a new firmware but it didn't help. So I decided to buy a new router, but now I want to buy a good one.
I have the alectel Speed Tuch Home modem (ADSL), and I want to...
yea it's the illegal use of this... but well I only scan I don't hack... and it's not just in this case, I tried and I am still getting disconnected when uploading more then 3 things in a time... when I am uploading I am getting connected to the ip's I am uploading to... and if there are many...
Thanks alot man! well, now I can upload how much as I want without getting disconnected but when I am scanning ip's and connecting to many ip's it still gets disconnect.
if you have any other suggestions plz tell me.
thanks,
Asaf.
hey,
I have a problem with my router.
everytime I scan ip's or uploading somethings, after few minutes i get disconnect, and I need to reset my router to be able to connect again to the internet.
I know the problem is because of the router because I connected my computer directly to the modem...
hey everyone...
I need a program that can show temp of CPU that is under 0...
and I am wondering if MBM5 or the hardware doctor (that comes with the abit mobo's) can show temps under 0...
thanks,
Asaf.
Hi,
I want to know what is a better card, and what I should buy.
Sapphire Radeon 9600XT 128MB(FireBlade Edition)
or
Albatron GeForce FX 5900XT 128MB
Thanks,
Asaf.
it's Sapphire, and how can I kow sure that I have 9600XT with the R360 chip.
donno why but sandra shows V350... donno what that means...
how can I know sure that I have the R360 chip? without taking off the HS, cause it will avoid my warranty.
hey,
I have a Sapphire 9600XT (FireBldae Edition) 128MB, and I opened Sisoft Sandra and it sais that:
ATI Technologies Radeon 9600 XT (V350)
the V350 means that the chip is V350? cause 9600XT are V360...
hey everyone!
I have an router, edimax BR-6104, and I want to open ports for getting High ID in Emule. The ports I need to open are:
4662
4672
4661
4665
If you know something about how to do it please share me and help me on that.
Thanks,
Asaf.
hi,
I have AMD 2500+ Barton on NF7-S, and my cooling is Volcano 12 (using it on 3000-3500rpm).
My case is Compucase CI-6A19, 1 x 120mm fan - rear, and 1 x 80mm fan - side.
and my CPU is really Hot for that I think, all the voltages are at default, no OC for anything, and the temps are:
about...
well ok, you say that it can be that I don'thave the overdriver tab and it is ok.
But I have another problem that is very annoying... well, in his vid card everything is woring great and he won't get artifacts when he put his core on 532 (the card is ready for that clock). And when I play the...
hi,
I have Sapphire 9600XT (Fireblade edition), but I don't have the OverDrive tab.
Do I need to have that OverDrive, cause well, my friend have the same card and he have an OverDriver tab.
is it different in some cards or I have to have it and something is wrong?
Thanks,
Asaf Sarid.
I am about to format my comp and I know that the newer driver for nforce2 chipset is 3.13 one from nvidia.com site.
Well, I saw that it includes the display driver for nvidia vid cards, but I have an ati card.
Is there any way to install that driver without the nvidia display driver? how...
Is it possible to do it? and it will work ok!?
cause I am about to format my comp, and I have ati card, so to do that or just to use the one from abit-usa.com!?
hey everyone!
I have NF7-S v2.0 mobo (nforce2).
my quistion is if the chipset driver from www.nvidia.com include all the mobo features - LAN, Audio, etc...
Thanks,
Asaf.
well sometimes I need it to see what programs works on my comp, and to disable them if needed, so I need to know if the proccess is a system one or used by my user.
and the guide is here if you want to see:
http://www.tweaktown.com/document.php?dType=review&dId=324
Hey everyone!
I just did the guide from www.tweaktown.com the one that sais from reformat to relax.
Now when I open the task manager and go to processes, there is nothing in the User Name column.
If you know how to put it back it will be great!
Thanks,
Asaf.
Hey everyone!
I just did the guide from www.tweaktown.com the one that sais from reformat to relax.
Now when I open the task manager and go to processes, there is nothing in the User Name column.
If you know how to put it back it will be great!
Thanks,
Asaf.
I heard goods about few beta versions...
d10 beta4
d10 beta2
d10 beta4x2 or 4x4.
So what of them you think will be good for me, and a link will really help,
Thanks,
Aasf.
hey everyone!
I have an NF7-S (v2.0) mobo, and I start doing OC and got stuck at 210FSB, so I decided to try changing the BIOS version to the modded d10 ones. so what version you think I should try and will be the best, and if you can give a link it will be great!
Thanks,
Asaf.
hey,
I have an English version of office 2003.
Is it possible to have a spelling check in another language (hebrew). and if it is possible, how!?
thanks,
Asaf.
yea I have the newest version of the MB driver.
and I tried lowering the graphics things in the game and no change. and it is wierd that NFS5 that is a really old game doesn't work very well. (but maby it's the game).
And the agp is set to x8 in the BIOS.
hey everyone!
I have a problem at my new computer, and if someone will be able to help me, I will really thank him!
First, my vid card is Sapphire 9600XT (fireblade edition) on a NF7-S with Barton 2500+.
First, at every time that I am installing a driver for the vid card my computer gets...
hey,
I have a new computer with Sapphire radeon 9600XT (fireblade edition) with 2.8ns memory.
the clocks are supposed to be 532/325
and in any program that I opened it told me that it is 325 and 500, something is wrong with the card?
hey everyone!
I got my new computer system, and I want to know how much you think I will reach when OC, and what will get me stuck...
here is my rig:
Barton 2500+ (locked)
NF7-S v2.0
TT Volcano 12
256x2 Corsair 3200C2 (v1.2 - CH-5)
compucase CI-6A19 (120mmx2)
300W HEC PSU
thanks,
Asaf.
I get a error when I am on the Internet:
A Runtime Error has occurred.
Do you with to Debug?
Line: 1
Error: Syntax error
how can i disable that thing!?
hey everyone!
I have a Sapphire 9600XT 128MB (2.8ns) with stock cooling, and I want to try 1.6v with my card or maby 1.7v, is it safe for me?
my system temp. is about 26-28.
thanks,
Asaf.
hey everyone!
I have a problem, when I am installing a new driver for my card, every driver, not matter what version, when I restart the computer, everything is working slow, even right click, the menu opens slow, and after few seconds I get a black screen and it returns (like when changing...
hey,
I have a Sapphire 9600XT 128MB (2.8ns), and I want to know what will be the best setting for my card when I am benchmarking for getting better result, and what will be the best settings when gaming!?
Thanks,
Asaf.