Search results

I don't think 8800 GTX was a bad thing, i think that Nvidia had a good chance of getting some real money from it. Even if everyone keep saying that the real money comes from the mid-end cards. Think about it, you are the only card vendor with something that does DX10, and even do DX9 in a huge...

Well I was waiting a LONG time for this card and as it never came out, I ordered Bluegears B-inspire. Weel now it got out :(, but since I can only rder from sites likw newegg and zipzoomfly, and it is not there yet, it's no use for me. Some difference beetween those cards that noone sayd that...

Hi guysm I'm sorry, I didn't looked at this thread since the problem was solved fro me, but here are the answer someone was asking earlyer. To disable vanderpool technology, simply go to CPU parameters and where it shows CPU disable bit, vanderpool technology and stuff, way below under the...

Didn't undertood what you sayd about spec speed, I sayd it could run OVER, WAY OVER the stock speeds, they are DDR2 667 and are now at 800 with 4-4-4-12-4 timings. Well to the point again, i HAVE FOUND THE PROBLEM. And i'm sorry for all of those messages but the problem was simple...

You probably wont believe, but I have tryed most of those things already, i'll try an older bios :(

I didn't even considered the idea :p If the question was for me, no... i didn't, used lock on PCIe, my mobo doesn't show this option, it only have the PCI lock, for 33....... I used locked and unlocked, and didn't worked.

Try to lower your multiplier and see if you can raise your FSB. If you can, it will not be the same problem as mine, it would be that your proc can't go any higher (which I doubt). If you still can't go any higher in FSB, so you have the same problem. I don't think this is something too...

Which BIOS are u using? Have you used another one with the same problems? Have you tryed to use other multiplier? A lower one? To see if the problem is on the proc?

Hum, this would still need to be the memory fault right? I have loosened the timings more than once, even trying to use 6-6-6-15..... The memory in the default use of the proc, can run 800@ 4-4-4-12 fine. As I sayd I don't think it is the memory the problem, even with 1:1 causing the memory...

I don't think it is the NB heatsink, it's not even warm to the touch. About the mem, even running it to 1:1 it can't do 667 (333fsb) so it's not the memory I'm confident about it. the default voltage is 1.8. Stil thinking about what it is....

FOUND THE PROBLEM, SIMPLE ONE, read in the second page ;) Thanks Hi, i have bought a new combo, a value one for USA guy budget but a great one for a brazilian budget. ;) I'm having some problems with the MOBO, i wanna know if someone can help me. First let me tell you my hardware. OCZ...

Several people have found the same overclockability with the vanilla version with the new BIOS 0309 installed. They are reaching 500+ FSB. There are several post in other forums talking about it. One thing I didn't see, even if the article in anandtech talks about it, was rainsing the...

Well, i have both types of monitors, LCD and CRT. My LCDs are a DELL 2005FPW and a DELL 2405FPW Both have a res of 1680x1050 and 1920x1200 I should say that even with those teorically higyh res i can still se MUCH of the jaggies. I have a 19 inch crt display from LG T910B that can do...

Why don't you try something like the BlueGears cards? http://www.bluegears.com/ They have Dolby Digital Live and are really good in games too, delivering the Positional audio in the DD Live. I would wait (like I am doing) for the DTS version though, they are to be out in jan to march...

As far as I could see, it is now in the SUPPORTED video cards for the new PureVideo. With exactly the same things as the 6600 does SD/HD video decoding and all, even for the AGP part. http://www.nvidia.com/page/purevideo_support.html So if purevideo is NOW SUPPORTED I think that 6800GT...

Does anyone know if, now with all of those PureView bla bla bla, we can enable HDTV out from 6800GT AGP normaly, without having to buy expensive converter stuff? Since i'm at it... does anyone know if I can use one of those COMPONENT OUT cables that come with a 6600GT to run a HDTV from a...

F*** I need one!!!!! :'( sometimes i hate living outside US.... Can someome buy one and send it for me? :D well it never hurt to ask anyway :)

Well the thing is... it is not norton, as I have disabled all the norton programs and it didn't showed in FileMon anymore (it showed before), i have even uninstalloed it at home for 1 day and it still made it :( But thanks for the try. BTW i have disabled the indexing thing, and boy.... WHAT A...

Right button in the drive u want it, and deselecting the last checkbox :D

I've found it, i'm at work right now, I'm disabling at work to see how the performance will drop. But as I have said, at work I don't have the problem i'm having at home. So i don't think that indexing is the problem, I have searched the net and A LOT of guys are having the same problems as I...

Thank you, but I already use ALL of them (except AVG wich I use norton instead). I don't know if I'm using indexing service in windows, probably I am since I think it is enabled by default, but i don't even remember where the hell I disable it.

Hi all, i'm having a major annoyance with explorer. It keeps opening and closing some dirs in my pc. It would not be some kind of shitty thing if it doesn't gave my pc a sudden and brief STOP everytime it occurs. I have downloaded the FileMon program and I could see the programs that accessed...

I still have at home a riva 128 and a riva 128ZX (yes i was stupid enought to buy one, right before my TNT). The rest of all cards where beeing sold to buy new stuff. I had a VESA one too, 512K with two 1MB Modules. Yeah nice time :)

Kinda off-topic but :) Not entirelly true, i remember my R8500LE 128MB BBA BGA that kicked some seriously ass at it's time with a way high overclock for the normal in those days. But as u pointed GENERALLY this is correct. But at that time LE or SE meaned only a small fall in clock, now it...

Hi all! Well i know this is a old and dead subject but i wanted some help. I have a 9500->9700pro softmodded card, i use w1zzard's drivers and they work well, in most cases, because i am one of the unfortunate people who got a card that is 90% working. I have MOST games working very fine, but...

This is not a driver problem but a CS SOURCE problem made by valve update

I hope they F%^&D this thing up when trying to fix the problems of no REFRACTION in GeForce3 cards, they must do something about it. P.S: I KNOW, I KNOW "What a dated card" someone is shouting, but i do have one in my 3rd rig and I have more than one copy of the game and want to play with all...

That really depends on what are u thinkin about when u talk about the WHOLE engine. I really, really love the way Half life 2 is graphically, but i think that INDOORS doom 3 probably can have a better engine, outdoor I don't know since D3 have none. BUT: If you think about physics engine...

I have a question about the new way Nvidia does the SLI tecnology! Why would they change from the line by line way of 3Dfx to the region way they use now. If they wanted to keep things equal from both cards they could still use the way 3Dfx did, since the line by line one, gives them the real...

I'm sick of the sick people, who are sick of the people, who are sick of these threads! Ok, sorry, couldn't resist! :p :D

Well, well... So, I think I have a real problem.... After seeing all those scores, I can see that my system is probably F#$%&DUP I have a 9500->9700 Oced to 390/300, that, always, in every game and every Benchmark, have scored near or better than a 9800 Pro card. But in Doom 3 it is...

Can anyone explain to me what the N/B Strap setting do for tha AI7? I just got this mobo over a MSI PT880, and i can tell that the difference is big in every way, i should had never got out of ABIT in first place :) I had no room for OC in the PT880, 210FSB best. Now i'm at 250 right out of...

Not Always, if i remember well CS (Half Life) had the default of DX and in OGL it was extremely faster than DX. So, OGL in FarCry can have some surprises for us....

Ok, i never knew that, but if the render was changed to OGL, does anyone know if it is better looking or even faster for the engine?

We can blame them for having an excelent game (the best RPG ever in my opinion), with a shit code full of stupid bugs, that can hangup and freeze any machine with any configuration, right from nowhere. But even with all these problems i still can't stop playing and loving it.

Exactly 46.4 probably, since at this res we can clearly see that the problem is not the Video card but the processor. Since in 1280 FSAA 4X we can see that even the 9700 pro gets almost 28. Probably the 9800 will do fine without AA till 1280, the real problem is processor with this game because...

I had this problem some time back too. But i use the game in 1280X1024 NO AA or 1024X768 2XAA So, your machine is stronger than mine, and i use the max settings too, i think that something must be wrong with your settings. I know too that NWN never liked ATI cards. Try a new set of...

X800XT is not the X800XT/PE... :rolleyes:

Yes :) to tell the truth, it only plays HALF-STABLE when i close the ATITool app, wich is the one i use to overclock my card, i only run it in default conf for my car, like a normal 9700. Lets see if the new catalyst magic can come true :)

I have a completly clean install of XP SP2 Last RC integrated, everything runs fine, no old drivers, already CAT 4.5 from beggining, i have not seen 4.6 out till today since i was sick thos last few days. I'll try them when i get at home. I don't use omegas, i use w1zzard softmodded drivers...