Hey all trying to figure out how in the world to pull my vid from my sont trv68 Hi8 cam onto my pc. According to asus using their software Digital VCR you can capture video, so far no luck. the thing that gets me is that this card does not have svideo on it even though it says it does. It does...
thats funny cause my 3dmark scores are low :(
I get like 17k in 3d2k1 and like 6800 in 3d2k3
Soo being that I get decent scores with Aquamark I decided to try and get a little more out of it. I installed the StarStorm X drivers and clocked my card a little more and pulled
AquaMark...
Just ran this AquaMark for the first time, no idea how good or bad my score is. Seems to be about avg from reading through this post.
Anyways here goes
GFX- 6924
CPU- 10249
score- 51762
linky
this is after i oc'd my card to 504/965
gfx - 7245
cpu - 10252
score - 53524
linky
I just checked my bios and in Jumper Free it has Performance Mode and mine is set to Turbo
In the Chipset section it has Performance Acceleration Mode and mine is set to enabled
here is a screeny of cpu z
Could be the newest bios enabled the use of PAM with a fsb higher than 200...
I have the p4p800 and my fsb is 251 and my performance is enabled, but I think I set it in the bios, I will double check and post a screeny when I get home from work.
I know on my asus p4c800 that there is a performance mode setting in the bios, i have mine on but I havent tested to see how it makes a differance. I am guessing that you have yours on as well.
I have my case about 3 to 4 feet away and the eheim still had an affect on my monitor!
Cool thanks for all the feedback guys I am going to the hardware store now to pick up the last of the supplies I need and come home and put everything together for leak testing :)
"clue trick"
?
also I had problems with my eheim 1250 causing waves on my moniter from emi thats why I am worried about this pump as supposedly it has no emi protection :(
I am getting ready to set up my wc rig this afternoon, just wondering about the danner pump, after I bought it I read a few posts about how it doesnt have any emi sheilding. Is anyone having any problems with it affecting your monitor at all? Also now I am reading that it is a loud pump :(
I...
iIf I remember correctly, it is in the advanced chipset/Jumper Free/ and DRAM Config. it has 4 options I set mine to 400 to be 1:1. This is if I remember correctly I could be wrong without actually looking at it.
I remember reading in a review somewhere about using #5 as well, but I do not remember the reasoning behind it, something about how it angles the direction of waterflow differantly or something along those lines. I am going to google it and see what I come up with on it. Thanks for the input.
I am expecting my RBX in the mail anytime now, just wondering for those of you that have used the differant nozzles, which one did you find to work the best for you and what pump and rad are you using?
Just want to have an idea of where I should be starting from, dont want to have to pull it...
I put clamps on every barb/fitting.
Also that noise. How loud is it? If it is really loud it could be the impellar not seated correctly, if it is just a subtle noise then it is what Giblet said and is only air moving around through there. It also could be your rad making the noise from the...
well shit, I had big problems with my ehiem at about 5' away from my monitor, I am gonna have to find some kind of emi sheilding tape, I think Fry's has some of that metal emi tape, gonna have to look into that one
I had the Ehiem 1250, it was what everyone and their friends brothers mother's suggested. I was not impressed at all, I could not get a good flow out of that pump any way I tried it, just my experiance. I am sure that people have had great experiances with that pump.
I have also had the...
Actually my wc setup up is higher than my block, its going to be sitting ontop of my case in a fudin itx shuttle case, so I am not too worried about heatas it is going to be routed pretty well.
While I was there I was opening the boxes between the 2 and the 5 and I noticed on the 2 that the inlet was a 3/8" id and the outlet was a 1/2" id and that on the 5 I have that they are both 1/2" id
If the 5 turns out to not work so hot I will return it and get the 3 off of their website. I...
It isnt exactly cheap, I got the Mag 5 which is 500 gph w/ a 10.5 foot head. The only other one they had was the 2 which is 250gph and 7 foot head. The 5 cost me $70. so it is about the same as the ehiem 1250. For $70 I am really hoping this pump performs betther than the 1250 I allready have!
So, yesterday I call my local PetSmart to see if they have the Danner Mag 3 or 5 in stock, they inform me that they do not have this product and have never heard of it, I informed them that I found it on their website. At this point I am thinking that it is only available on their page but then...
just for the wc setup, thats the reason I bought my koolance to begin with was I wanted an enclosed unit for everything.
As for having my swifty set up wrong, I dont think so as I tried it as many differant ways as I could think and in everyway so far the koolance 200g block and exos al has...
For what its worth, and I know most of you have prob seen me say this, but I get about 5c lower on my exos than I did with my eheim 1250 swiftech and dteck heater core setup, the exos really is a good product, I have allways thought that is was a crap product until I actually tried it. Only...
Hey all building my 3rd wc setup and its the first time I am going to actually be running an inline setup either without a res or without a fill and bleed set up (swiftech) so my question is what does everyone use? I have read people using a t spliter with about 3 inches of tube and a funnel...