Search results

Here are the idle system temp reading using Everest Ultimate Edition. E6750 @ 3.6Ghz at default voltage XFX Geforce 8800 GT XXX edition (default clocks of 670mhz core and 975mhz mem) http://premium1.uploadit.org/ManojM//System-Temp-at-3.6Ghz.jpg

Yes, I fixed the eSATA problem. It works fine now.

No. It is pretty big. Just put it over the rams it will cool the chipset cooler. It is a tight fit. It is nearly impossible to get it to fit. Let me see if I can take some pictures to show you.

I think it was 40 to 50 degrees C. Let me go home and check it for you. I normally don't bother about GPU temp because mine is a XFX GEforce 8800 GT XXX edition and it is covered with 2 years warranty. If anything goes wrong I can get a new one from them. The main office for XFX is in...

I think the temps are pretty good for the case. Just remember to reverse the fans for the CPU heatsink (intake and outake). My Geforce 8800GT usually stays around 40 degrees C to 50 degrees C.

You can check out the details in the picture. http://premium1.uploadit.org/ManojM//Conroe-E6750-at-4.1Ghz.jpg

Last test before I leave for my vacation in 6 hours. Conroe E6750 at 4.1Ghz (inside a tiny Shuttle SP35P2 Pro) http://premium1.uploadit.org/ManojM//Conroe-E6750-at-4.1Ghz.jpg Shuttle rocks man!

Here is my latest result. Conroe E6750 @ 4Ghz (1.44V) http://premium1.uploadit.org/ManojM//Conroe-E6750-at-4Ghz-and-DDR-II-1000-CL5.jpg Super PI passed as well. http://premium1.uploadit.org/ManojM//Conroe-E6750-at-4Ghz-SuperPI.jpg

You are getting new ICE fans?♥ From where? Why are you going back to XP?

Yesterday I got a chance to test the overlcock potential of my newly built SP35P2 system. Conroe E6750 @ 3.8Ghz (voltage set to auto in the bios) OCZ Platnium DDRII 800 @ 950 CL4 (voltage set to 2.275 in the bios) Seagate 500GB Seagate 320GB XFX Geforce 8800 GTX XXX Edition (670mhz...

Yes, I am using the eSATA cable that came with my external hard disk case.

Can this cooler be installed in SP35P2 Pro? http://www.ocztechnology.com/images/products/accessories/t/XTC_Cooler_mbt.jpg http://www.ocztechnology.com/products/cooling_products/ocz_xtc_cooler

Do any of you guys are using the eSATA port? I can't seem to get it detected in Windows Vista. I know it is enabled by default because at system boot, it shows that it is enabled. However, I can't get it to be detected in Vista.

I got the SP35P2 Pro last week and it is excellent. I wanted to get the SX38P2 Pro but it was not out yet. I am told it should be availble early next year. I am in Hong Kong. However, seeing that the SX38P2 Pro will provide me with no real benefit over the SP35P2 Pro, I decided not to...

I am only using 2gb mem now.

Actually there are 32bit drivers and 64 bit drivers for everything now.

Which version will be better? 32bit or 64 bit? Which version of Vista have you guys installed? I am using a Conroe E6600 system.

I don't want to add too much mem voltage. I prefer 1:1 memory ratio. It seems to perform pretty good already. I will run more tests in a couple of days. :D

That is to say that max CPU temp for conroes is 85 degrees c. Is set by the program and it can't be changed. As long as the CPu temp doesn't get higher than 55 to 60 degrees C at full load, you should be fine. I

Here is the max the CPU can run stable air cooled inside a tower case. Conroe E6700 @ 3.8Ghz in Sandra 2007 http://premium1.uploadit.org/ManojM//Conroe-E6700-at-3.8Ghz-Sandra-2007.JPG Conroe E6700 @ 3.8Ghz Super PI result...

Now for some overclock results: Conroe E6700 @ 3.7Ghz in Sandra 2007 http://premium1.uploadit.org/ManojM//Conroe-E6700-at-3.7Ghz-DDR-II-740mhz.JPG Conroe E6700 @ 3.7Ghz Super PI http://premium1.uploadit.org/ManojM//Conroe-E6700-at-3.7Ghz-Super-PI.JPG 3DMark Results...

2 weeks ago I built the following system: Conroe E6700 (ES) Asus P5W DH Deluxe (Quality Stuff) 2GB Corsair PC6400C3 XFX Geforce 7950GX2 XXX Edtion Creative SB X-FI Fatality Edition Dell 24" Wide Screen LCD The tests results that I am going to post are from early testing only...

I don't know what to say. I have been informed what whenever the Conroe is launched, the shipping date or the release date for stores to start selling them will be a couple of days after the launch. So if the launch date of 14th July is true thent he shops will have them or will start...

I think all the stock (worldwide) ships with 0401 bios. It is an old one. 0502 and above supports Conroe. There are newer ones for Conroe Stepping 5 support.

Yes it is annoying. But what to do, we pay the price for upgrading early. Conroe is not even released yet. Another 23 days to go.

Damn I don't have another CPU to flash the bios. I will have to go back to the shop tomorrow and ask them to use their testing CPU on this motherboard and flash the bios for me.

I just setup my Asus P5W DH Deluxe and Conroe E6700 (ES) B1 Stepping. The system won't boot up. I am wondering if it is my XFX Geforce 7950GX2 XXX Edition causing the problem or does the motherboard bios not detect an ES E6700? Any thoughts or suggestions that can help me boot up the...

How did he get a retail X6800 box so fast? That too for only $500?

I have noticed that the higher I overclock the CPU with Quad SLI the better the system performance. So it is better to have a CPU clocked at 2.8ghz or higher to make good use of Quad SLI.

I am not sure how quad SLi will work with hacked drivers. Seeing the big issue it has been for offical Nforce boards already. Even if someon hacks the driver one will be running SLi at x8 and x8 compared to the full speed of x16 and x16 with the Nforce 590 SLI (Link Boost Technology enabled).

How come i can only set it to 16x and not 32x? FSAA max 8S

I think it can also work with a 24" will all eye candy on. It is not like Quad SLI will not work unless the system detects a 30" LCD monitor. :D

I was planning on buying the ASus Physx card but dicided not to because I don't like Ghost recon and the other games in the list are not exciting. Only Unreal Tournament 2007. By then Nvidia will release their drivers and all will be good for free. I don't have much space for PCI slots. I...

Why did you get a Physx Card? You will get it for from Nvidia with future drivers with SLI or Quad SLI. I will get Conroe XE with Quad SLI. It will good for 6 months when I will upgrade again.

I am sure they will. Running Quad SLI you at least need a CPU running at 2.8Ghz and higher. What I have in mind is to buy the Conroe XE and Nforce 590 SLI (Intel Edition). However,I am hearing that the Nforce 590 SLI (Intel Edition) is not a good overclocker. That is why Conroe XE is...

3DMark 2006 gives only 10% to 15% gain with Quad SLI compared to just using one card. It is sad but true. 3Dmark 2005 has no gain but 3DMark 2003 has a good gain. DO you know that with a cheap AM2 X2 3800+ @ 2.97Ghz and XFX Geforce 7950GX2 XXX Edition I get 9239 3DMarks in 3DMark 2006...

I can test Tomb Raider but not sure how to run the benchmark. Can anyone explain how to run the benchmark in Tomb Raider?

Yesterday I tested the AM2 X2 4800+(ES) @ 2.81Ghz and Geforce 7950GX2 Quad SLI. The AM2 x2 4800+ is a very early engineering sample. It is not a good overclocker. My AM2 3800+ @ 2.97Ghz (Stable) is a better one but I lent it to a local hardware reviewer who lent me a Geforce 7950GX2 and...