I am looking to upgrade, and was looking to go as thin as possible from an overall height perspective so I was hoping to go without a GPU. I have not upgraded in years, still running a 1090T on an old Gigabyte board, at least its using DDR3 I guess.
Again going for minimal footprint, so I was...
Looking to upgrade my media server board from an old Core 2 Duo to newer tech.
I am needing a board that has a few SATA ports, and can support this sata PCIe card.
Current setup has 6 on board headers, and I'm using an old PCI card for 10 total drives, but I need more ;)
Looking at a budget...
Been a long while since I've done anything but piece meal my upgrades, but recently I've lost a hard drive and think I have a memory stick flaking on me, so I'm looking to upgrade or rather start over.
I do not play games on my PC anymore, I barely play games on my Xbox these days. However, I...
Just purchased a 70" Vizio TV and 54" sound bar, now I need a good wall mount. I was looking at a swivel mount but I now do not think I need one. I want a mount that sets the TV as flush as possible to the wall.
So who has recommendations, I have searched but love the knowledge of the...
I'm looking for a reputable modular power supply that the 24 pin is also modular. I had an ultra a few years ago that went bad. Looking for a 500 watt or so, just trying to run a few extra hard drives outside my case. I won't go into details, just looking for the recommendation. Oh and I'm...
I saw one of these a year or two so, but cannot seem to find it again.
Wanting to find a card reader to go in my empty bay that also has USB 3.0 ports, and a 'dock' for my portable ssd. Anyone know where to find one?
I've been scanning my documents with my epson workforce printer, but it's simplex. I'm looking for advice on a more efficient way of scanning documents. Should I look at a duplex scanner, or look for a printer that has duplex scanning capabilities? My printer is over five years old and needs ink...
I have (4) GIN-6350P Power Supplies from a server I am getting rid of.
$100 each/OBO +S&H (DFW area free pickup/delivery)
Open for trades, but nothing specific comes to mind at the moment.
I have had in my possession for way too long now quite a few wire shelves. Right place at the right time, but now the extras are just taking up way too much space and I need to sell some.
These are just the shelves, and the plastic pole stop inserts. !!! NO POLES, JUST SHELVES !!!
I have...
Looking to unload some older stuff, willing to trade most of it, a lot of it could probably go for just shipping if you can persuade me.
I take non-CC paypal or cash if local to the DFW area. Prices include shipping. I'm just trying to get rid of some of the clutter.
I'm looking for small...
I'm hoping someone has an ASRock 880GMH/USB3 or GIGABYTE GA-880GMA-USB3 laying around that they would want to sell. I'm trying to upgrade and have found these two boards to suffice all my requirements.
I'm also looking for an X6 CPU to go in the system, and some RAM as well.
So if you have...
1) What will you be doing with this PC? - Ripping & Encoding DVD/BR collection, and Normal office stuff (with multiple monitor support)
2) What's your budget? - $300 including S&H & Tax
3) Which country do you live in? - 76247
4) What exact parts do you need for that budget? - 8GB RAM, CPU...
I was looking at getting my wife a laptop for her 30th next week; however, I have since changed my mind and believe its a bad idea. She only needs something to surf the net, and she uses the heck out of her phone, so now I'm thinking a tablet.
I looked at a netbook, but seems they are a bit...
So somehow my wife and I both picked up LeapPads for the kiddo, not enough communication I guess. And it turns out it is this years Furby, so I'm going to try to sell it rather than return it.
The version up for sale is Pink unopened. Asking $200 (including shipping) OBO. I am also willing to...
I thought I while back I had knowledge of newer boards being capable of running their onboard video along side a PCIE installed card. Am I imagining this, or is it true? I have slept a few times, had a kid, and many other things since I last examined this stuff, so I could be way off the mark.
CM2X1024-6400C4 x2 - $25
CM2X1024-6400 x3 - $25
M378T6553BZ0-KCC x2 - $20
MR16R082GBN1-CG6 x1 - $20
KVR266/512 x1 -$20
CMX512-3200C2 x1 - $30
CMX256A-3200C2 x2 - $30
M395T5750EZ4-CE65 x1 - $30
I also have a GeForce 6800 for sale or trade, $30, or will trade for a USB...
Looking to buy a used PCI video card that is capable of running a 23" LCD at 1900x1200, or close. Or possibly a USB Video Card adapter, hoping to use this on my third LCD.
Not looking to spend a whole lot or I'd just buy a new one :)
Thanks.
I have a Dell PowerEdge 850 for sale. It has 2GB of RAM, hard drives have been removed, and a small heat sink needs epoxied on, part of the retaining clip broke, not sure on the rest of the specs as Dell's site keeps telling me the service tag doesn't exist.
Service Tag: 171K891
Quick Specs...
Anyone interested in a Dell PowerEdge 850 server? No hard drives, and the heatsink for one of the processors is lose, needs some thermal epoxy. Its just sitting in my garage taking up space.
(6) You must Post a PRICE unless the item is purely FT. (trading for cash still means FS)
I had a link once to an 8 port SATA PCI card on NewEgg for around $100, but cannot find my bookmark, and was unable to locate the item searching NewEgg.
Does anyone know of such a card that exists anymore? I'm trying to add some drives to an older motherboard that is functioning as my server...
I have a Biostart G31D-M7 that I picked up off the forums to run my Xeon 3020. I'm now ready to upgrade that processor to something a little beefier. So I'm looking for a s775 Quad Core CPU on the cheap. Specs say it'll handle a Q8200 or better. Hit me up if you have one or some DDR2 up for...
We're putting together a large media storage server and encoder machine using a 1095T. The case is quite large (24 3.5" Bays), and has a large number of mid-plane fans to cool the hard drives. So all we need now is something to cool the processor that does a better job than stock, but not...
I know I'm a bit late to the ballgame, as usual. And after much back and forth purchased this game for myself and a buddy. I talked with many friends, and read tons of stuff online, but my buddies said they loved it, at this point I realize I need new friends.
I cannot believe Activision let...
I guess I could have posted this in General, but thought the gamers would have better input.
I am looking for a pair of bluetooth stereo headphones for the office. I have a rather large office and my work table is on the opposite side from my desk, so corded headphones are out of the...
So after troubleshooting for a while, I was able to narrow down my failing hard drives to either a bad motherboard, or a bad power supply. So I'm trying to replace both, just received a new MB from another [H] member, now I need to find a power supply, but am strapped for cash. I was using a...
Sob Story: Mother-in-law passed away a little over two months ago, funeral expenses have stacked up, so now I have to clear out the closet and try to pay off some of those expenses.
I have a handful of stuff, and a ton of old junk, I'll post pictures later. Feel free to make offers on...
My Asrock croaked, along with my power supply, or one killed the other, not real sure. So now I need a temporary fix. I'm hoping my proc is still good, so I'm in need of a motherboard.
DDR2 capable (preferably 4 slots), s775 Core 2 Duo compatible, micro/mini form factor. I need it to fit in my...
I am trying to troubleshoot an issue I cannot seem to narrow down, and I dont have a ton of cash to throw at a solution, so I need some brain power assistance.
2.4GHz Xeon Dual Core CPU (its a socket 775)
2GB of DDR2 Corsair
4970 or something PCIE GFX card (no outside power required)...
Picked this up today for cheap. Its a Chenbro RM51901, its a few years old, and the back planes are all PATA. I am working with Chenbro to see if I can purchase SATA back planes; if not, I'll just pull out the PATA ones, and run cables straight to the adapter card...I hope. Now to get a...
If I use WHS as my OS for storage, can I run something like AnyDVD, or DVDFab on this OS? I ask this because I was going to build a multi-tasked machine to use as a ripped/encode/server device.
We are in the new house, and trying to equip our 'living room' with some new stuff, considering its empty anything works. The space is a bit limited, and there is only one cable jack, so placement of furniture and hardware is a bit frustrating.
I am wanting to outfit this room for myself...
I have had these for a while now, and debated a thousand different uses for them, but have since decided to not go down any of those paths. So now I am going to try to trade them off for some parts that I can use.
Short description:
4U Cases w/ DVD drives
Industrial Motherboards/backplanes...
I have 16 Dell servers, adding more shortly, that are currently hooked up to a single Star-Tech KVM. The problem I have is when more than one individual needs direct access to their machine to load/update the OS, someone must wait. I was hoping to find a KVM-over-IP that would allow the team to...
SO I just obtained a project screen, haven't even measured it yet, but its free so it works.
Now I need to look at getting a decent, read as cheap, projector. I have a game room that is roughly 20x16. One end has three windows facing North, the opposite wall is empty, correction there is a...
I currently have a cheap wireless card in my computer. It had been hard wired in my previous house and the card had been in my HTPC, well after moving and the router being placed upstairs at the opposite end of the house, I had to add it to my main computer. However, the signal sucks, and I have...
I am in search of a pole kit to mount LCDs on. Not an LCD kit to mount on a pole, but the actual pole itself.
I have 5 foot cubicle wall I need to mount some monitors on, and would like to be able to slide them a little back and forth. Should I just go to Lowes and buy a 1.5 or 2" fence post...