#1 is a monoprice 32" Zero - G freesync
#2 is Samsung G7 32" (Primary)
#2 is just an 12.6" sensor panel.
Escape From Tarkov has my Samsung Listed in the drop down menu, but when select it goes to my sensor panel, so I have to select a "blank" monitor in the drop down menu.
Doom External in...
It started off when rebooting wouldn't boot back into bios or windows unless it sat for hours/days with power cord removed. Now I'm at the point where letting it sit isn't working. Currently the GPU LED illuminates for a second, powers off, and PSU fan spins for a split second. It cycles like...
$350.00 Plus shipping. Local pickup is cool with me. PayPal. Questions please ask.
Never used for mining, O/C in MSI AB 5% as not a huge O/C'r. Original owner and non smoker.
Please don't PM me with "I can get xxxx for the same price". If that was the case you wouldn't be wasting my time...
I have an ADATA 1TB that's fairly new. I have been having issue with my MSI Mobo Tomachawk X570 with latest F/W and chipset drivers. The SSD would just disconnect and I would have to shutdown and tap on the drive in order for the mobo to recognize it. I would reboot and everything would be...
MSI 390x w/NZXT *UNKNOWN IF WORKING PROPERLY*. -75.00 plus shipping (Missing attaching hardware for the KRAKEN)
I removed this as I was getting some artifacts at higher temperatures. I found the heatsink loose so I took some RTV to adhere it. Then I just ended up getting a new GPU and here...
Anyone have any experience with this printer. So far it prints PLA rather well, but having hard time with PETG and of course ABS.
What mods do you suggest?
My mainboard went T.U. and i tried using the ramps method, but I'm having a hell of a time with it.
I followed the instructions to the "T" over at instructables.com and even using an old Xbox PSU.
Messing with this for a while and I think I'm deeper in the rabbit hole.
In prontoface-Selecting...
***SOLD***
Never overclocked and in a smoke free environment. I'm the original owner.
225 plus shipping - Had this watch for a while, but never wore it.
EHX - C9 / 160.00 shipped
DOD - BoneShaker /45.00 Shipped (yea I know)
Squier Neck origin unknown. / 60.00 Shipped
I purchased this and the person who sold it me wasn't honest. There is a nick on the 12th fret and a little divot on the board. The picture makes it look worse than it is...
card back to me.
I sent one of my 280x in for RMA which matched my other 280X. This is what I received in return
GPUZ
Compare at default clocks, shaders, bandwidth, ROPs/TMU's, Texture Fillrate, DirectCompute 5.0.
This is the card I received back from RMA.
This is my other 280X...
The CPU/Mobo were never overclocked and was in a non smoking house..
The CPU/MOBO combo is 230.00 shipped / paypal. The CPU will not have a HSF and the Motherboard will not have all the accessories, but has the i/o cover.
Local pickup as well.
Payments : Amazon Payments, Paypal.
80.00 Shipped for both cards.
50.00 Per Card.
CPU ****SOLD****
They were never overclocked.
AMD HDZ940XCJ4DGI PHENOM II X 4 940
Powercolor 5850's
2 x Radeon HD 5770 Sapphire Vapor-X
Gigabyte Mobo GA-MA790X-DS4
AMD CPU PHENOM HD985ZXAJ4BGH w/stock HSF
Mushkin 996533 2GB HP2-6400 4-5-5-11 2.1v
G. Skill 2GB F2-8500CL5D-2GBPK 5-5-5-15 2.0v - 2.1v
200.00 Shipped PP'd, but prefer Amazon
EDIT: This isn't a full computer it doesn't...
Rooted/Cymod10 (Boot screen shows 9), 4.1.1.
Screen been protected with a Zagg since I have owned it. I'm the original owner. The back has normal wear and tear..
75.00 Shipped.
ASUS Crosshair IV Formula... The board hasn't been installed.. It was a RMA motherboard- 100.00
G. Skill DDR2 1066 (1x2GB) - PC2-8500 2.0 -2.1 V - 30.00
EVGA- 8800GTS - 30.00
Powercolor 4780 - 40.00
AMD 64 X2 - ADX6000IAA6CZ 60.00
Non Working Motherboard XFX 590i Motherboard - 10.00 - I think...
games only?
I have 3 monitors, 1 and 3 are extended desktop which I how I like it. When I group to make eyefinity it just makes one huge desktop and I can't stand it that way. I tried setting up with a profile and that's not working or I'm doing something wrong.
Anyone know if this one is active?
http://www.bestbuy.com/site/Rocketfish%26%23153%3B+-+Mini+DisplayPort-to-DVI+Adapter/2343724.p?id=1218321953507&skuId=2343724&st=Displayport&cp=1&lp=13
I ordered one from Amazon an I didn't get the mini so I'm going return it. I just want to try...
G.Skil - F2-8500CL5D-2GBPK DDR2 1066 PC2-8500 CL5-5-5-15 2.0-2.1v - 30.00 shipped/pp'd
AMD Athlon X2 - ADX6000IAA6CZ W/ an XFX 590i DOA Mobo - The motherboard worked up to last week. Replaced the CMOS battery was getting a C1 error (Memory Controller). Cleared CMOS after I cleared the CMOS...
I'm running dual 6950 unlocked shaders. I have the cards o/c to 6970 .. 1.175v / 880Mhz / 1375 Mhz.
Each time I reboot my computer one of the cards during 3d gaming reverts to stock speeds.
2D profile and 3D profiles are both locked. What I have to do is jump though my a## to get...
the Best Buy off of LBJ in Farmers Branch has about 30 of them in stock. I know this isn't "hot" but from what I gather these are a little hard to come by.. but then again I could be wrong because I haven't been keeping up with this stuff.
Mods if this is the wrong forum.. My apologies.
Maybe..
I have two Sapphire 5770's (Vapor X 5770HD) running Cats 10.7's
One card when at desktop runs as follows
GPU1 = 400
GPU2 = 860 (3D mode)
Run in BFBC2 during load up
GPU1 = 860
GPU2 = 860
BFBC2 Main Menu
GPU1 = Bounces back and forth between 400 and 600
GPU2 =...
what's the best way to configure this? I'm running dual 5770's and have to 22" LCD's I want to use the HDMI's ports. Right now the 2nd monitor isn't being detected. Or is it best to run both monitors off one card?
5770's CF even with the 5770 memory is 128 bit and DX11.. I'm apologize if I'm beating a dead horse. I did a search on the forums and came up with a few things but nothing I could use to make my decision on.
that may or may not be interest to some..
I have a VW Trends and Hot VW mags want to see if anyone would be interested in them before I take them to the recycle center.
I have a 1930 wind up laptop ;) j/k but I do have an older than dirt laptop that I think is running windows 2.11 .. It's...
B&M. I know they have them in the Plymouth, MA store and Plainfield, IN (I got mine here) store as well..
They are regularly 79.99. The jacket is style J247 PTB / RN#14806
I can't get CCC to enable my 2nd card. Everest, Device Manager, GPU-Z, and even CCC detects my 2nd card but it's listed as Disabled.
This is an issue that creeps up on me once and a while. I think it's a ventrilo and a creative issue because it always happens when I have ventrilo running...