Search results

Alot of CRT experts in this thread. Ok, those of us who own 2070sb and the rebadged versions, what does the 'constant brightness' setting really do on a 2070sb? Does it crank up the g2 voltage and ruin the color temperature? It says it's a setting for aging monitors but really is it a gimmick...

Look I have an IQ of 3, can you just humor me for the hell of it and set your perfectly calibrated monitor to 100% contrast and 100% brightness at 9300k and tell me what 'middle screen spot' luminance value your display calibrator reads?

Ok so let me ask you this, you have it set at 9300k, you have your typical brightness test REC pattern bars displayed. What luminance cd/m2 will you arrive at with the correct calibrated brightness level? Also what brightness percentage are you then on? Obviously if you have a fully calibrated...

What luminance cd/m2 are you guys measuring with a fw900 at 9300k with contrast and brightness both 100%?

Huh...this is interestering. This post from 2003 claims their calibrated 6500k 255, 255, 255 2070sb was only putting out 72cd on I'm assuming the non-superbright modes. I'd say I'm doing pretty well with 73cd on the 2060u's text mode with deep blacks. What do you guys think?

What kind of luminance are you guys getting with your calibrated 6500k screens? My 2060u is getting 73cd on 'text mode' with the RGB settings cranked just before color bleeding On 'normal mode' it goes up to about 87cd at 6500k. Normal mode at 77% brightness is only usable for gaming because...

He isn't sure but he says he's going to have them fixed or at least have them professionally rebuilt to see if he can rebuild another few good ones from his collection.

So turns out the bloke has 6 Intergraphs, only 1 works well tho...

Have you guys seen on the CRT Collective facebook page lately, this bloke found a 28 inch Intergraph...the legendary John Carmack screen...

sounds like dry solder joints

"If you set 1600x1200 85 Hz on Windows panel without any custom resolution setting, the driver uses DMT with timings different from both CVT and GTF because this resolution is on the DMT VESA list with those custom timings." I've spent too much time watching Joe Rogan....can you explain in more...

I notice in CRU that under the timing methods there is the default 'manual choice', Automatic - CRT standard and Automatic - Old standard. Given my 2060u, which timing mode should I use? Windows automatically selected 1600x1200 at 85hz when I plugged in the monitor through the DPU-3000 without...

Hi Guys, I just did this video about my investigations into getting the best signal from the Sunnix DPU3000 to my 2060u. It has vastly improved my display quality.

WOOP WOOP did it, I had to try 2 different micro B usb cables. The first one 1 tried didn't have a deep enough connector for the Sunnix power connector. I'm now running with a 2m long 19 pin dp to mini dp cable and a mobile phone charger micro b cable providing power instead of the pin 20...

https://www.cablechick.com.au/blog/the-displayport-pin-20-issue-explained/ I need a 2m long - 20 pin displayport cable to provide power.

I tried that, still nothing.

Hey I encountered a weird thing with the Sunnix DPU 3000. I just tried to plug a new 2m long dp to mini dp cable from my GFX card to it and it didn't work, no light or sound but if I plug in the supplied 10cm long DP to mini DP patch cable it works fine. Is there some sort of a chip or different...

Is it just me or does the Sunnix DPU3000 get these symtoms worse the longer you use it. I remember it was fine for the first 2 months and then it started this text ripple, bottom line on top, random picture drops every 10 minutes or so. Is it something to do with capacitors inside the adaptor...

I can confirm all your claims about the Sunnix DPU3000 in relation to occassional text ripples on the screen at 1600x1200 on my Mitsubishi 2060u. The Sunnix also has the issue of occasionally displaying the last bottom line of the screen on the top of the screen. I've tested my 2060u on a...

Does anyone find that their text gets more blurry on a Sunnix DPU3000 at say 98hz but clearer at 85hz both at 1600x1200 ? Why does this happen?

This is the best deal I've found for the Sunnix DPU 3000 in Australia $92.40 + $10 postage. Works amazing, just got my 2060u up to 1600x1200 at 98hz with CRU. I loved seeing the ' out of range message for the first time haha...

So do these usb-c to VGA adaptors work if a graphics card (like my r9 290) can output display port signals? The card doesn't have a usb-c port or the mobo. Does this mean that if I team this adaptor with a usb-c pci card it might allow the graphics card to output display port over usb-c?

Can the Delock 62967 do 1600 x 1200 at 95hz on a AMD R9 290 ?