Search results

Finally got it suspended under my desk

Yeah power and silent operation requires some effort, it will likely go back to looking nice with the original shield as a NAS server or something some years down the road.

One last post of my final setup now the new one is coming out. I did mount the crazy Morpheus cooler to a nano and got the C7 cobber. I bend a sheet of 4mm steel hole plate so airflow and temps are quite good now. Cant recommend the morpheus as it did fit the mounting holes, but the chip is like...

The copper C7 should be close to release, it is showing up in china https://item.taobao.com/item.htm?spm=a1z10.3-c-s.w4002-17844584971.69.735689b8hwwYlm&id=565243899316

Yeah there wont be any room left against the chassis side, but look at how short the nano card is, I think there might be enough room "above" the cooler on the part that will stick out way beyond the pcb against the case side.

Hmm great then it should fit with a few mm left. I was planning on having one 40mm intake right on the vrm of the card and since the print is so short on the nano i think a low profile 120mm would fit on to its rearside. Now im only missing the cryorig copper edition to free up my 4x40mm noctua...

Anyone remember the GPU cooler clearence height ? so I dont have to open it up again. I was considering putting the Raijintek MORPHEUS II CORE EDITION on my old Nano card (pretty sure it will mount to it) to silence it maybe see if I could jam a low profile 120mm in behind it.

Yeah like 60 dB I was wondering if anyone modified it with other fans, although it would be neat to have that style of fan and lead the air out the back like a GPU blower style fan.

have anyone tried the dynatron A18 AM4 cooler ? also any one spotted the copper version of the cryorig C7 yet ?

M2 speeds are mental :) start up feels like going out of sleep mode (evo960). I dont really need the m2 speed as much as I dont have the space because of my monstrous GPU (waiting for something VEGA) and also because I refuse to put a mechanical drive in the zentry as I wanted it to feel like an...

Yeah I put in a 500gb m2 and 1000gb sata SSD in right away to accommodate everything I do for work and so on and I also got a 4tb external drive incomming for overflow.

They should be out some time this month basically a 1060 with no output ports, no fan, just an extruded block with no heatpipes and a box with fans and a 1200watt power supply and board that runs like 10 of them. Im not sure when AMDs version is ready but I hope it is before VEGA gets out or...

I doubt it will go down until after Nvidia or AMDs dedicated mining cards are released in large quantities

You could strip it and attempt to have it chrome plated. Ofcourse it might be a nightmare to clean out every threading unless you could figure something out with some sacrificial screws or something.

Yeah I know, I just wanted to remind people that they can get back at them a tiny bit by lowering their score on trust pilot

Im the guy whose case they damaged with a hook and are refusing to take responsibility for mentioned in the update(I described it quite a few pages ago) I did not know they had refused the claim. I would have had to have xray vision to tell something was wrong and I also did not even get to...

Wauw GLS har such dicks, atleast I found the link to review them on trust pilot and shit on them as hard as I could :)

Well anythings possible if you pay. People could team up with willing people in nearby EU countries, have it shipped to them from the indiegogo campaign and have them ship it with expensive high priority freight or even pay for a ticket on a passenger plane :), but that might be a bit late to...

GLS did the same thing to me with the motherboard, waited all morning with the doors open all the way to the front door so I could hear it for sure and then I updated the tab in my browser and it told me no one was home like 30min ago and they never send me a pickup notice at all. I had to go...

Yeah im running a 95watt tdp 1600x and a 7870 on it and it doesnt even run the fan most of the time A bit ugly just put on with wire and there is also some thin plastic on top to direct the air. I am considering building a metal shroud to better duct the air later.

74 according to the biostar control program loading it for a while on CPUZ at 100% did make it go down to 3,4Ghz but I am running the the fans on a voltage regulator at somewhat low rpms.

Im running a 1600x and so far it seems good stays at 3,7 and even seems to go up to 4ghz shortly at times just running auto no overclock. Im running it on an NH L9x65 SE-AM4 that I cut down with a hacksaw and put 4x40mm noctua coolers on the sides in push/pull. I got an extra 92mm noctua and...

Yeah it works very well. I was also confused for a bit as it really didnt seem to fit at all just by pushing it in and the holes in the pcb do look bit like they line up with the screws at first glance.

you can shoehorn it in there really easy with a thin piece of plastic like the hard kind that most ram are packaged in, just cut a section out with a scissor.

It was GLS going through germany to Denmark and the strike to the body was so hard it tore the welds on the plate inside the cover off. It looks like something kind of pointy struck it at a flat angle and still managed to go through everything. I didnt hand sign any physical papers stating...

Ok I will send email

Got mine just now and it had some damage pretty similar to that other guys internal box. Like a strike right in the middle of the box with a fair amount of force. It made it all the way through every layer off boxes and bags chipping a bit of powder coat at the rear :(. Atleast it didnt strike...

Oh cool thanks the GLS tracker has full details on how it went to germany and now it seems to be in a depo in Denmark :). I doubt you need to pay VAT when its from an EU country I never have to when I get stuff from the UK and Germany.

yeah those updates are not very useful, I have received 6 NIF-input status updates over 3 days without any location data at all. Anyone know what comes after NIF, if you ever get any other kind of update before it arrives any kind of how, where, when or will it just arrive with no heads up at all ?

Ok thanks a lot so I can probably do other stuff today and tomorrow :)

My shipping is with allekurier.pl and im getting a lot of status updates on stuff being scanned and so on, but the field that says location is always empty. It makes it hard to figure out what day it will arrive. 9 NIF-wejscie 09-05-2017 01:05 8 Przejscie HUB NORMAL 09-05-2017 01:05 7...