Search results

Hello, i would like to ask about possible solutions to my problem regarding a Hardware solution for internal 20 Pin Expansion. My Setup is the following: Motherboard: Z390m-Itx/ac ( No USB-C internal Header ) Case: NZXT H210i ( USB-C Frontpanel to internal...

So i modded my V1 alike Now i could´t figure efficient cable routings since it is not in my budget to use custom tubing&cables. Then i was thinking about Dan´s Windowkit however i need about 0.6-1.1cm Clearance on the CPU side. I really like to fiddle around making my own however i am in need...

we are talking about 1-2mm in terms of thickness.. nothing too fancy. however i´d recommend buying 2x gpu side panel filters, since they would match the lenght of the case. if you want to make an effort by putting them on..i recommend using a lil bit sand paper to scrub off that 1-2mm at the...

Everything for the show of course :D . The demiflex filters were designed for the dan a4 propably due to the psu issue as you mentioned. I measured around 0.8~1mm between psu and and the sidepanel. Now...it may work for someone to put a fullsize dustfilter but as for me it is not worth the...

Here you go...i basically stuffed all my cables under the psu which is not as i would wish...but due to the price of custom cables its worth using stock ones. The gpu side has the demiflex covering all of the holes in the sidepanel. Didn't think it'd be necessary to post pics about the gpu sidepanel

I'm using designated dust filters from demiflex (around 30-40$ combined). By given numbers, the heat increase might be around 5-7C but I cannot confirm any of this. I get same heat levels with or without my dust filters attached. I´m using this build: i7700k 4.8 OC delided,LH 9i Noctua Cooler...

One does not simply put a fan into the dan case

Lol those comments. ...point taken... :D Probably not the best idea to cool...

http://store.supermicro.com/92mm-fan-0145l4.html I found this 11.500rpm cpu fan and also saw it on linustechtips. The question is if it will fit into the case (v.1). Since the asetec aio is not gonna fit due to missing vents&screwholes i believe this fan could give a 15-20% temp drop into my...

Question: is the "MSI GeForce GTX 1080 Ti Aero 11G OC" a good value in terms of price, performance and cooling inside the Dan Case or what could you recommend. I´ve read through the forum about others buying other than blowerstyle cards but i am quite worried about noise and heat. Much...

A single 77C peak after the asus intel extreme tuning stresstest. prime95 just somehow clocks down to 4.5...maybe because of avx. (otherwise same results) I played LoL at high settings around 60fps...stock igpu clocks. Gw2 on medium settings at 65fps, Tf2 high sttings around 140-180fps varies...

Managed to squeeze 4.8Ghz with my noctua lh9i fan... are you guys getting similar results?

i went to stock settings (whole bios at standard even the clock) and now i am getting between 880 and 961.. this cpu drives me nuts

Aida 64 reports 100% constant usage on 4.8 under prime95. Once i clocked it down to 4.4Ghz the new cinebench result is 876, which is worse than stock... i don`t know but after my delid it seems that all specs went down except the put in overclocks. For what the clock is, the benchmarks are not...

Here my setup: Strix z270i 2x8gb 3200 cl16 rgb ram (g.skill) 1x 960evo Silverstone sfx-l 500W i7 7700k delided & relidded. Noctua lh9i stock. My max temps hover around 87 C under load (cinebench) And my cinebench score is around 915-1028 which is kinda funny because it is overclocked onto 4.8Ghz...

caseking (ger) sucks. their delid 4,8ghz i7 7700k which I ordered 2,5weeks ago is now said to take 3-4 weeks longer, which is why I cancelled the order and ordered a stock version from vibuonline.de. I might delid it if temps are unsatisfactory....

I found this and thought to implement something similar by removing the slot connection and putting it with some magnets on the side panel (CPU side) Do you guys think it could work?

Guys i couldn't find a sufficient spreadsheet for different clock speed stats on the 7700k... since i'm about to buy a pre delided one 4,8 oc from caseking and ppl suggested i'd have to run it down to 4,5~4,6, i kinda like to know what settings i need to provide. Offset, coreclock, voltage and...

my best bet is to buy a pre delided 7700k from Caseking (4.8 ish ghz) + a lil bit of faith so i can keep it under 85 C on load. however, since i`ve ordered internal dust protectors for both sides i kinda get the feeling that 85-90 will be my avg temps on load... D: ....any suggestions? maybe a...

Here are the specs...

Originally it was meant to be placed on top of my ps4. Currently i'm using it for my raspberry, ps4, pc, laptop and other stuff. It is really lightweight. The inputlag is not noticable but since its not meant for high fps gaming i haven't really tried out so far. I have to say. If you look for a...

For mobility reasons i got the hori ps4 monitor from japan. It's the size of a ps4 but it can handle 2 output & its in 1080p

I feel lucky to be unable to buy any gpu so far^^ therefore i got spare time to make the best decision. Btw. I am planning to squeeze in additional small formfactor fans such as a bequiet! 8mm one. By fixing it with magnets i believe it could work.

Thanks man. I'm probably gonna do it myself. Although i am quite anxious about ripping 340€ apart :D. Right now its gonna take time anyways since i gotta save the money. ( 230/590) done. For my m.2. 960evo 500gb & ofc the 7700k

Is there a German based deliding service? I`m not too fond of my own deliding skillset... (no skillset at all)..

Thanks for this piece of advice. How does a standard radiator GPU perform? After doing hours of research everyone seems to have their own opinion. Most of those are that blower style GPUs could potentially be a better fit. On the other hand, you are right about the prices and custom GPUs do...

I believe you gotta somehow get the temps to about 85-90 under load...unless you want your gear to get fried... i gotta say. i haven´t been able to put my setup together yet but I'm gonna watch out for additional fans (miniature) if possible. Thanks for the benchmarks.

So my current parts for my upcoming build include 1xStrix z270i 1xnoctua l9i 1xsilverstone SFX-LG 500W 1x dual ram G.Skill RGB 3200mhz cl 16. and of course the Dan a4 SFX case...now my question is... how much of a CPU overclock I could potentially be looking at if I buy an i7 7700k 4.2 Ghz...