Search results

If someone is still interested in LP53 and AM4 mounting with fins parallel to RAM slots: there is Gelid AM4 mounting that maybe will fit without heatsink modding UK: Gelid AM4 Mounting Kit for Tranquillo Rev.4 There is AM3 mounting with similar look, i just "interpolated" the AM4 brackets

You are right, that is 3D model not 2D drawing, and there is difference I like the idea about shroud to separate intake air to exhausted heat and i think to use self adhesive foam sealing tape

I measure website cooler render with Libreoffice draw and looks like wrong (specs 140x120) with 92mm fan, but there is another render on alternate product page:

I`m curious to see motherboard support list, because with those 140mm lenght maybe it will block PCI-E slot of some motherboards with "heatpipes alondside memory slots" orientation

I hope for "next week" (24th or 25th)

Wow, 74 fins and 6 heatpipes and bonus black (ceramic?) coating. I am looking asymmetric design of Nexus Low 7000 R2 and the new Alpenfohn Black Ridge and curious why is reversed, but maybe there is a reason for that

Probably from Ebay: Noctua NF-A12x25 PWM Sterrox LCP fan Interview with Lars Strömbäck (Noctua CTO) about the development of the NF-A12x25 fan:

GEEEK A20 supports Flex-ATX and dual slot low profile card (possible upgrade) and is cheaper, but is made from acrylic and IMO is a bit ugly.

Interesting copy of Phanteks PH-TC12LS, but 4HP direct touch: PcCooler U-4D

Only AMD Wraith Max and Noctua D9L holded 1800x in AIDA FPU test: Ryzen ITX Cooler Roundup

I guess latest prototypes will not support 2066 with this mounting. Only AM4 and 115x.

Dynatron L6 for GPU and CPU with 70mm fan

I guess only Gigabyte AB350N-Gaming WIFI has the chance to mounting 120mm fan with normal height memory (in two slots) and it is pretty close to 8-pin CPU power connector:

With 1cm clearance, this extender will work: Ebay Store: http://stores.ebay.com/modDIY-com-Store But here Zotac GTX 1080 Mini is 125mm, Sentry supports 112mm+18mm=130mm. So connector clearance is 5mm and need Special Low Profile cable Why cooler is L9x65? Sentry supports only 47mm height coolers

I`m not sure for what socket measurement is 7.3mm. EDIT: It is like minimum height: AM4 Socket Dimensions Help Needed L12S bracket? I guess, you mean A12x15 fan mounting wires I`m curious too. About dust, all tested coolers pull air through the side panel. They are working on filters...

Hm, Is this wrong then? 4790K vs 6700K IHS I think IHS height is the answer here

Zip ties instead included wires? Or for included F12 fan to use L12 with fan mounted under need VLP memory: http://www.overclock.net/t/1494564/silverstone-sugo-sg13-mini-itx-owners-club/1370#post_24793807

CoolerMaster GeminII M5 LED (RR-T520-16PK) 63mm height maybe will work without turbolence.

Noctua A12x15 but with custom colors, like i.e. Noctua NF-F12 PWM Linus Tech Tips Edition If two custom color fans are cheaper than two Noctua fans, then is good option to include them.

Based on latest tests with TY-100 and ordered VLP DDR4, what fan will be part of heatsink? Tried to order TY-100: But 2 weeks no respond/reply. I need AXP mounting kit too, because Nexus Low 7000 R2 (second hand) recently i ordered not include Intel mounting, but i ordered AMD to Intel...

This C4 is like "case for"

C4-240, C4-AIO

via Asrock Forum

Halos RGB Fan Frames (plastic) Halos Lux RGB Fan Frames (aluminium) But: 16mm fan+6mm RGB limited to use radiator 25mm

Custom combo cooling CPU+GPU 240? There are for sell separate blocks with pump (Id cooling) But there is no 22mm slim (copper) radiator, only 30mm. So no test A12 fan (25mm) test here. But after all, 30mm radiator is better. EK-CoolStream SE 240 (Slim Dual) 26mm radiator Alphacool Eiswolf GPX...

What will be better: 30mm rad+ A12x15 fans or 22mm rad + A12x25 fans?

I am curious how will perform Scythe Big Shuriken 2 (58mm with 12mm fan) with Cryorig XT140. Here tested with Noctua NH-L12 with bottom fan only: What is the Best CPU Cooler for the LZ7? Results:

It is 43mm-15mm(or 16mm) equal to 27mm, but this not include space between cooler and mainboard, so will fit but without heatspreder. Maybe with 13mm XT140 can work too.

Sorry, i deleted my previous post. I think io board with power (reset) button can be modular (custom front panels?!), mounted with screws and another side just cover plate mounted same way.

I drop my opinion/ideas as a ilustration:

With ~65mm CPU cooler clearance to the side panel, maybe can fit: 120mm slim fan 15mm and slim radiator 22mm (Silverstone TD03-SLIM) and slim pump cpu block 28mm (Zalman LQ310): 15+22+28=65mm (too tight) and tubing and fitting may cause a problem. Oh and RAM memory height too. Edit: Similar...

Jonsbo U1 Plus is 11.97L: support 135mm height CPU cooler (Noctua U9S) and 195mm GPU lenght (GTX1070 ITX) But Lazer3D is smaller: 7.07L

Hm, newegg listed this board with ETA next week: ASRock X299E-ITX/AC LGA 2066 Intel X299 SATA 6Gb/s USB 3.1 Mini ITX Intel Motherboard From thread in SFF:

I think you choose wrong position U heatpipes:

Nice try, but better will be symmetrical position (without losing cover surface).

The three cutouts each side of heatsink, are they for rubber seals to prevent vibrations? Maybe they can serve as air splitters too (spoilers?), because cover and 92mm fan.

No review, sorry. But you can take a look photos here: http://www.adtrp.com/index.php/product/index/id/32.html Maybe this is another manufacturer (don`t know)

BPlus riser R3y series for PCI-E 16x and R4y series for NGFF M.2 (M-key, PCI-E 4x): This R4y looks interesting:

Spacer borders 10mm and 20mm to fit coolers up 60mm- 70mm