Wo, I think at lease a baseline test should be ran. Possibly any CPU with a stock cooler? Looks like you have an Intel CPU and stock cooler so you’re already on track! This was others may make they’re own assessments on what CPU/Cooler combo can be achieved with this case.
Also like...
Being unable to get to the boot screen after a build is an unfortunate ending to any build.
I tend not to assume on the internet and want to double check so things with you before jumping straight to a replacement purchase.
Did you test run your build out of the case before assembly, with...
Isn’t ESD basically a non-issue now a days?
Never had an issue and can confirm vacuums do a darn good job of cleaning my computer many years ago. (Haven’t had dust build up in last two places I’ve lived over 3 years)
Agreed, I actually held out because of this forum and went with the ASRock AB350. 10/10, love the board. The bios and fantastic ram OCs is my main takeaway. Was able to get my Team T-Force ram down to 3200 w/ 14-16-16-32 timings.
Post from earlier:
So thank you for your sacrifice and posting...
I agree with Ej24, that vcore seems wack! I’d start asking around here on the Intel forum and see if they may know. Or do some google searching as even those idle temps are high.
Had my Sentry since June, still no dust in the system/fans. This was also the case in my last case, haha get it, cause it...ok I’ll see myself out now.
On a serious note, I am not sure what environments cause dust in cases. As I have not had a dusty case in over 10 years.
Not sure where you live, but in the states most cities/towns have a couple libraries with 3D printers now. All for a few dollars if that, depending. I’ve wanted to make ducks for my Sentry and even a case for my rasPi for awhile. Just suck at the designing part.
Also ditto on the temps!
You can go to their website: http://zaber.com.pl/sentry/ and hit the SUBSCRIBE button off to the right. Or a direct link: http://zaber.com.pl/sentry/#subscribe
I’ve got a 2TB HDD with 0 issues. I believe it operates around 50C, out of town and can do a quick double check then. Also I’m able to fit the drive with two screws above the pcie ribbon cable as I have max height ram that only leave a mm when the case is closed. It survived a full move into my...
https://ebay.com/itm/Dr-Zaber-Mini-ITX-90-Degree-Inverted-to-8-Pin-PCI-E-PSU-Adapt-/332384462503
This also word as well, although I think I like the amazon link more. Depends I guess which is shorter may help a little with cable management.
I definitely second the Corsair SF600 for the overkill route. After having it since launch, it only spins up during benches and is dead silent during my daily PUBG rounds.
I also second the l9a for direct compatibility, you can check out TekEverything YouTube channel on his video with it on...
It's up for AB350itx as well. Currently running ram at 3200 MHz at 14-16-16-32-54. Is it possible, after I update the BIOS, my ram would have to be set to worse settings, I kinda like where i'm at an don't want to change anything?
Currently have Team T-Force XTREEM 16GB (2 x 8GB) DDR4 3733 in my Sentry case for 169.99 USD now 196.99 USD, jeez those prices! Currently have them at 3200 MHz with tight timings as I didn't want to go higher than 3200 MHz with loose timings.
CPU-Z:
Edit: My mobo is the ASRock AB350itx and...
Thanks, I look forward to your results. I've been using 26.6 as it was for my old sandy bridge CPU, but I now realize I have a new CPU so I'll be using 29.1 as well thanks for the double check!
Sweet, if you could grab some temps from prime95 v26.6 on both LP53 and NH-L9a to compare and any other test you may want to do (what program are you using for temps?). I have neither, but would love to see how well the LP53 does on Ryzen. I will be doing a comparison with my C7 and T318 with a...
Why not purchase one now? Or grab a used GPU to hold you over until the next lineup of Volta or navi cards?
I hope your Sentry shipment arrives soon too!
Sorry man, sounds like an RMA. My SF600 spins on boot and stays off even when gaming (PUBG, Dreadnaught, and Smite). During benches it'll spin, but it's whisper quite compared to my 1070 GPU at 70%.
I'm pretty impressed with the fan control on my ASRock AB350. You can control each individual fan (only use my CPU fan) from the BIOS as well as the software. This has helped with my 1700X as the +20C is annoying.
Here's a pic as well, needed find find my phone:
https://imgur.com/gallery/C51F1
Edit: Picture is at a slight angle so it almost looks like 6mm, but I've measured it multiple times and even with a sparkling ruler at 5mm.