i currently have synology nas with 2X2 gb ecc udimm Single Rank (on the same channel)
and single 8gb ecc udimm Single Rank on another channel (i think from my understanding that all of them at this time working on a single channel (is that right ?)
so i want to add another 8gb ecc udimm in dual...
hello
first of a clarification : i dont know programming or advance networking only basic computer stuff so please answer the Q as simple as possible and a specify details for why and how is fine too
i need to chkdsk multiple disk of empty used 6 tb nas HDDs i am selling (few dozens) and the...
hi
i always wonder if that is possible or not to connect a dx1215 to a jbod or raid array using an HBA card attached to a windows or any other system pc beside synology own products ?
i ask because i no more need my second expansion unit and someone else want to build a server using his pc and...
i am planning of buy X570 Phantom Gaming-ITX/TB3 around blackfriedy but this motherboard has strange choices in it design
1- no front type c on premium board in 2019!
2- thunderbolt 3 and m.2 both go through the chipset even though there is a detected nvme lanes in the cpu !!! (at least...
i am planning of buy X570 Phantom Gaming-ITX/TB3 around blackfriedy but this motherboard has strange choices in it design
1- no front type c on premium board in 2019!
2- thunderbolt 3 and m.2 both go through the chipset even though there is a detected nvme lanes in the cpu !!! (at least...
as the title suggest i am looking for external usb adapter to convert internal wifi card i already have to work externally via usb ?
somthing like this one :
my house have cat6 wiring built-in but i needed to get a technician to help me wire both rj45 male connector and female faceplate for each cable (around 12 ports total)
this was around three years ago and he and i tested every port at that time and they used to run at 1000mb
but i didn't have...
i use a phone as internet modem (using tethering via usb) to my pc (only have LTE connection in my area) and i use my pc as router to send the internet connection to the nas via ethernet (using internet sharing on windows 10)
the internet works on the nas but all ports fail to connect...
hi
i have strange problem with a used motherboard i just bought (ZH77A-G43)
i already have a hba sas and sata add-in card (LSI 9211-4i) which i use for my tape drive (lto-7)
now when i upgraded the motherboard and cpu from an old i5-750 the motherboard keeps changing the boot priority...
last week i moved my components to a new case but didnt put the gpu back in because i wanted to mode the case first and have been using the igpu also i did update the bios to the newest one(first time since i get the mobo last year) and every thing was ok
two days ago i droped the gpu (evga...
i just bought gtx 1060 for my main PC and put my old hd 7970 to my old PC to use it as secondary PC for the living room instead of collecting dust
the older pc specs :
i5 750 (stock speed)
GA-P55A-UD3R
hd 7970 ghz
8 gb ram
Antec EarthWatts GREEN 650W
windows 10
i tried to stress the system...
i just bought 2 used RT8N1 0RT8N1 MELLANOX 10GBe and one sfp+ cable (Cisco SFP-H10GB-CU3M)
i want to use them in PC to NAS (synology DS3615xs) cofig
the nic's were detected by both the windows 10 pc and the synology nas as (5th interface) < i only have 4 1GB nic's orgenaly on the nas so i...
i am looking for a cheap atx motherboard that have at least 3 x16 pci-e slots (effective pci-e lanes are irrelevant)
i looked on ebay but all consumer MoBo with cpu combo look a little bit pricey for my project
and i want to keep the cost down
so if i can find an atx "server" MoBo with xeon...
as explained on the title
can i use these (two of 10 gig nics and sfp+ cable) in direct attach config
(i dont know if they have the feature or not since i read not all sfp+ cables and nic's have direct attach)
i will buy two of these for my PC and NAS :
RT8N1 0RT8N1 DELL MELLANOX CONNECTX-2...
I have sff pc with these specs
i7 6700k
Z170I PRO GAMING
Corsair SF600 sfx
Corsair Vengeance LPX 16GB DDR4 3200
Samsung 950 PRO 512GB PCIe NVMe
SilverStone Mini-ITX ML08B-H (58mm clearance for cpu cooler)
SAPPHIRE Radeon HD 7970 (old one wil upgrade later)
Noctua NH-L9I ( bought it without...
Hi
i really cant deiced which MoBo to get
on paper ASRock Fatal1ty Gaming Z170 Gaming-ITX/ac have best features " i think" but also have alot of bad reviews
Asus Z170I PRO GAMING on the other hand have nice UEFI but no type-c and the wifi not that good < it have better reviews
GIGABYTE G1...
hi
i am building small form factor and quiet PC and i already bought some of the components
i7 6700k
SilverStone ML08B-H
Corsair Vengeance LPX 16GB DDR4 3200 C16 for DDR4
Samsung 950 PRO Series - 512GB PCIe NVMe - M.2
and GTX 1060 (not sure which vendor yet but i like the low profile evga...
Hi
first off sorry if i write this in the wrong forum
i am looking for a good chair to go with my new PC build
i will use desk\monitor setup and i work from home so i will be on that chair for 8+ hour a day
mostly i watch movies and browse the web and some times play games
because of that i...
hi
for ovar a year now and i have been thinking about having a sff gaming system
and i feel now is the right time for me
i am a causal gamer and never did a over clock so i am Hesitating between 6700 and 6700k also i will add a EVGA 1060 SC later on (few months from now) or a better low...
hi
i have a gigabit Ethernet on my mobo and another one as add-on card
and like to combined them into one interface to increase the speed to 2 GB
for file transfer to and from my NAS
windows 8.1
thanks
hi
i have DS3615xs as storge server for my media and personal data
anyway i have it for more than 2 years now and it is very stable NAS but i start to feel it is a little bit slow for what it can be (200 MB/S) on average between the volumes
i have 4 volumes of (6*6 tb wd red in raid 5) on the...
Hi
i wrote a thread earlier here about this card
most replies told me to re-flash the card and i follow this guy instruction to do so :
How to flash the firmware of your LSI RAID controller, using MegaCLI on a DOS boot USB drive | TinkerTry IT @ Home
but sadly i got this message ( i tried...
hi
i just got my new (used) server with this card but cant get access to its sitting
i get this error message :
F/W is in fault state - MFI register state 0xF0FF2102
specs :
LSI MegaRAID SAS 9271-8i card
X8DTN+ Motherboard
2x Intel Xeon E5620 2.4ghz Quad Core 12mb Cache 5.86 GT/s
8x 4gb...
hi
i just bought a used supermicro 36 bays server and tried to slide out the motherboard tray to get access to backplanes but couldn't ( still like a heavy rock !!)
i did like this video but it didn't work for me and dont know how to fix it
https://www.youtube.com/watch?v=Yu_6Sz3xXv8
and...
Hi
I am looking to buy a used server for storage back up and as plex server and found a good deal on eBay but the seller told me the back plane only support up to 2 tb drives
I dont think he is right but need to be sure before buying since i will ship it internationally
server spics ...