1. yes you can use it without the audio card, or any of the cards its optional
2. yes you can use it without the bluetooth wifi card
3. I haven't try this drive yet but I doubt it would be a problem.
5. The problem with the screws was on both the MPCIE and sound card was that it was screwed...
I really want this case too, but man its like impossible to find any reviews on it, all the google searches are from complex 2015 and it's not even available in Canada only place i find that has it on sale is newegg.com
I'm using a HDPlex 160W and looking at this I can tell you the HDPLEX mounting spots may be too close to the Hard drive mounts I would push the hard drive mount a bit further down otherwise the Sata cables will interfere with the HDPLEX PSU.
Right now I don't even use any double side tape on...
Would you be able to offering different color side covers ones with vents and ones without? Originally you only offered extra covers without vents. I wouldn't mind buying two new silver covers for my black frame.
I can second this, I initially purchased the ML06 which is pretty much the same as the ML06-E all they did was moved the location of the GPU to fit in a dual slot LP GPU.
First off ML06 has very poor ventilation especially for the CPU cooler and you can't use anything like a cryorig C1 in it...
lol these cases were shown last year, its been a year since and no mention of these cases anywhere but mean while deepcool releases this:
http://www.deepcool.com/product/case/new/index.shtml
what a waste.
Do you think in future releases you can do other anodized colors? such as red, blue ect? ie like the jonsbo cases? I own a jonsbo v3+ in anodized red as well and it is beautiful, pictures online don't do it justice you gotta see it in person.
I would email HDplex he could possibly send you a longer version of the 24pin...also careful NOT to use 24pin cables that aren't supplied by HDplex two reasons being
1. the HDPlex 24pin cable is wired backwards compare to standard PSU 24pin cables...
2. the HDPlex 24pin cables use thin...
wow that's silly of them to make an "LP" graphics card with a proprietary bracket that's not only full height but wrong mounting standards for NA and not provide a lowprofile bracket with the card lol
if you're in canada http://www.ncix.com/detail/zotac-geforce-gtx-750ti-lp-48-103837.htm
NCIX has it aswell ...but the price lol...it was cheaper before the CAD dropped so low.
I just ran the qfan control and set to silent it actually helped way quietier than before but I might switch to a smaller cooler though for less noise since this fan is loud in general
yea you're right my idle speed is around 850 rpm the fan itself is loud but it does a good job cooling the cpu. I'll try the bios but might consider switch to a smaller cooler if the noise really bothers me.
I did some tests with the vented and non vent panels against the Cryorig C1 cooler.
With the vented panel i get louder fan noise and my cpu stays cool at 38 degrees
but if i swap for the non vented panel the fan noise is reduced but my cpu temp jumps to 48 degrees
this is kind of a...
sure here's a pic of it with the lid on. One problem is that since the lid is so close to the fan it enhances the noise of the fan so its super loud. I found that taking off the lid reduces the fan noise a lot.
so I put spacers between the lid to reduce the fan noise you can see through the...
I'm using that exact same setup you mentioned lol
Here's my L3 next to my V3
It's a tight squeeze and with the C1 you can only fit 1 HD, and you if you squeeze in the HDplex 250 you have no room for HD at all...so i had to use my HDPlex 160...
so the C1 fits just right no room to spare...
man I'm trying to build mines and this thing is a tight fit for my existing built if you put in a HD Plex 250 you have no room to mount any drives lol and the cryorig c1 fits but leaves really tight spaces for wires and hard drives
So what's the cost estimate of this case with shipping once it's for sale? I'm curious because if prices are in USD, it could be a very expensive case for Canadians
I had same issue with one of those stupid screw, i ended up heating it and removing the screw with two pliers since i worried i would strip the screw lol was such a bitch!
I just got my unit today and its awesome, this thing is quiet and most of the time my cpu fan is louder i do get that sound people complaint about but its so faint and doesn't happen often you can barely notice it or even mistaken it for hard drive reading.
Well I'm pretty interested in this case and also so many other ppl in this thread so I'm pretty sure you can hit that 50 mark, If you just set up a simple website so we can place a preorder like loneindustries did for his L1 and L2 i wouldn't be surprise if your preorders fill up pass 50
i just took out my board to replaced my NH-L9i cooler to a cryorig C1 and i noticed my board had bent, curving in towards the center im just puzzled how this could happen the NH-L9i wasnt even that heavy anyone else have this problem?
Anyways the back plate mount of the cryorig C1 seems to give...
well it is silly, not everyone is interested in speed, why would their lower end Z97i Plus support M.2 PCIe and M.2 Sata while their top line only supports M.2 PCIe, MSI's top line supports both
and as for M.2 PCIe being the future, yea it is but at this point there no many to choice from and...
will they ever add support for M.2 Sata? i think its silly that it ONLY supports M.2 PCIE for a top of the line board. I just bought a m.2 sata drive today only to realize it doesnt work.
man i really like this "noname" one, I love how they fitted the slot loading dvd in the back that's genius by hiding it out of site it's always there IF you ever need it
http://www.bit-tech.net/news/hardware/2015/01/07/deepcool-launches-two-mini-itx-cases/1
They also have these two, the second one is looking nice like the macpro design