Search results

Ok, successfully flashed bios New error code...78 LED for boot device stays lit No other change, no output to monitor, no post Error code 78 is "ACPI MODULE INITIALIZATION" EDIT: Pushed clear cmos button...Got an A2 error with the LED for boot device lit I unplugged all hd's and...

Ok, stuck in 3rd vid card...same result Used another computers working hard drive: It took longer to boot..the LED for boot device didnt start on, but after a bit, the light came on and stopped at A2 error again. Once again, no post, splash screen, anything

Asus X99 Deluxe I7 5930K 16gb Crucial Ballistix 295X2 in crossfire Primary HD is Samsung 840 Pro Samsung 840 EVO (just for some programs and folders) Crucial M4 ssd ( pictures etc) EVGA 1600 P2 CD/ROM Anything else that would help?

Playing a game, computer freezes....First time since build. I reboot..computer reboots, but I get a funny screen, half normal, half funny colors like bad video card. I reboot again, this time hang on A2 error (IDE DETECT) and my LED for Boot device is on. No post or anything. Things I have...

Trying to add a 23" monitor.. The 23" will show the bios screen and etc, but as soon as it loads my desk top, the 23" screen goes blank..like the signal got cut off. Its a software issue, but not sure how to tackle it. Suggestions?

Mech Warrior Online..

I picked mine up on Saturday... Main store for Microcenter showed 2 instock, I reserved mine immediatly for $1299. Its replacing 3 x 24 screen that were in portrait mode...3240x1920...now I am 3440x1440 And I must say, I absolutely love it.... I was worried about the loss of vertical...

Gents... I am very wrong...I did pick up the 34UC97..Sorry for the misleading info... Will edit my posts for posterity.. My only excuse was its was late last nite and clearly I was tired while researching this 60hz thing..

Can I make a request?? something spacey...stars, and shit..I like the black with color...

Wrong monitor.. please ignore..

Wrong monitor...

Bench tested. Still cant get slot C1 to show.. I have pulled and installed the memory so many times trying different combos that I would think I would have got it to show at least once when I have managed to get into bios........ I am going to ask for an RMA...this shit just aint working...

Alright..updated bios...no change. Installed Crucial 4 x 8gb sticks to try a different set of memory...again, same issue..slot C1 not showing any memory...with slots D1, B1, A1 and C1 filled with 8gb modules, I get a bd error.. I presses mem check button on mobo, says memory is ok, but only...

DOH! Thanks

Can you send me a link for 1002 UEFI... Asus website only shows 0904 Thanks

Still have memory issues!!!! About ready to toss the fn X99 Deluxe out the FN window. New memory in G skill DDR4 2800 4096x4 FC-2800C16Q-16GRK Bios only shows 12gb,, not showing memory in slot C1. CPUZ shows memory as 16gb?????? Task manager only shows 12gb I can get XMP profile at 2800...

Alright.. I think I have a bad Crucial stick. I put system into stock settings. While doing so, I notice that the bios show that one of the sticks of ram is 4gb, not the 8gb its supposed to be. So I move it to b1, boot up and the system shows it as 8gb. I think AHA!, bad slot/mobo..run...

I will do the 1 stick at a time thing...see what i get. As for speed, I remember setting it in BIOS to a fixed number of 2133 I thought.. The only think I changed in BIOS for OC is the multiplier to 45, the base clock is still 100. I also upped the voltage on the CPU some because I...

Raja, Here is the exact module..Model Crucial 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2133 (PC4-17000) Desktop Memory Model CT2K8G4DFD8213 http://www.newegg.com/Product/Product.aspx?Item=N82E16820148859&cm_re=ddr4-_-20-148-859-_-Product I ran Memtest86 for 2.5hrs.. not a single...

2 x 8gb Crucial Memory I have been having issues with stability on OC, due to ram. Couldnt figured it out. Then noticed the system shows me having 12gb, when I have 2 x 8gb of ram involved. So I am at loss how to check it. I get no other errors indicating a bad stick over all. I have...

Yes..it was either hack it up or fuck with radiators, returns and shit. I will clean up the hack so it will just look black. Might even make some brackets and put the dvd drive back...

Yes.. bitspower were just plain expensive..these are Monsoon Chainguns...I felt they added something design wise. One neg about the Monsoons is just how big they are which make fitting them tough at times

No..it has a 4 pin molex plus a 4 pin pwm fan type plug so that I can control the speed the mobo and tie it to temps

Ok..fixed pump speed with the bios tied to the temp...much quieter. ..never had such a quiet system.....my temps are spectacular also...so glad I did the...will try to upload better pics.

No, its just a loud whine...

And I dont mean finished as in it buttoned up..but ran for 30 mins with no leaks... I still have to mount the pump/res... and damn, the thing is noisy...

Ok, here it is...Changed some parts from the list..Its not done..will be doing black and white Phanteks also Please let me know of any errors or problems you see. I will put in a drain line...Didnt get enough fittings. I had to cut out the cage that holds the CD ROM...had to bang a few...

Is it possible for game play to improve even though there has been no changes to the drivers, hardware, settings and no game patches? this has happend twice now. I dismissed it the first time, thinking I might have done something. But I settled on some base settings for Planetside 2 and I...

switched to 14.9 drivers...no jitter...FPS aint so hot..but stutter is gone.. Still tweaking.

No, this was not an open box... Newegg treated me well, they took off overnight shipping plus some, making my out the door price less than listed.

1. New card in and works great..for sure it was the other "new" card. 2. I still have stuttering on Planetside 2, but greatly reduced. Its almost playable. Now its time to play with drivers, setting etc.. 3. Firestrike scores with some methodology here: Score of 19,996 was "new" bad...

Newegg taken care of me and free next day air for the replacement! To be continued tomorrow..

Just hit me in the face..might go better... Well, I have some more details...might be bit of a recap... 1. Added the HX 750 to one vid card... stutter was less, but still completely unacceptable. 2. Tried to run just the new card...cant boot. After about 4 tries, I install older 295x2...

Well, 2nd PSU helped with the stutter..but still not nearly acceptable. To prove to myself that I was seeing an improvement, I ran it both ways twice to make sure. Fire strike score was 600pt lower on the 2nd round. Just to kill the PSU therory.. I am going to hookup a 3rd PSU, one...

i have a 2nd EVGA G2 850w that I will hook up and see if it solves my issue... Do i assume correctly that I cross the pins on the 28pin and then I can make the thing work on its own? 24 pin green to black..got it..

Purchase a 295x2.. It did ok...added a 290x that I had, did better. So I took out the 290x and added another 295x2..Now huge stuttering issues Using Beta 14.7 drivers, which were better for me than 14.9 current Current specs. i7-5930K OC'ed to 4.40 16Gb DDR 4 Asus X99 Deluxe OS on...

Ok, more questions about loop order...will be purchasing parts soon. Is this order OK? Pump>GPU>GPU>Rad at top of case>CPU>Rad at front of case>Res > pump again? I am looking at pictures, and seems most people go from GPU to CPU, then rads and then pumps. It would make more sense to me cool...

Well, I sorta had that part..it was more of...straights vs 45's vs 90's and where...but I am thinking the only way to know for sure is to try to put it together. Also, I am gonna change the pump and res to a single unit..save on some connections and complexity.. Here: EK DDC X-RES Top 140 w/...

Ok Gents, redid the parts thanks to the suggestions. I am having trouble correctly guestimating the amount and type of connections needed. I envision the loop as such: GPU block ( 2 GPUS) to CPU block to top rad, to bottom front rad, to res, to pump and back to GPU. Seems to be the most...