Search results

Now I've done some more testing with iperf and everything seems to be working as it should.

Now it seems to work. I discovered that one of the vlan interfaces in pfsense had changed mtu to 1500. Changed that and now I get 90-100MBps between my workstation and my server. I will do further tests later this week and post the results here.

Ok. I will use jumbo frames on a new separate vswitch just for the vm's and disable it for current vswitch and the rest of network. My plan is to upgrade my setup with 10gig switch and a nic in the esxi server since I currently have a 10gig nic in my workstation. So it would be good to solve it.

Now I've done some more tests with iperf. The TCP test is fine and shows 950 Mbps but UDP? The test result below is with the command : iperf -c "my ip" -u -w 256000 -l 64000 -P 5 -b 1000M. Package loss? [ ID] Interval Transfer Bandwidth [ 7] 0.0-10.0 sec 230 MBytes 193...

Just tested iperf in udp mode with a few different options and this is one of the results [ ID] Interval Transfer Bandwidth Jitter Lost/Total Datagrams [ 3] 0.0-10.0 sec 1.07 GBytes 923 Mbits/sec 0.173 ms 763/785900 (0.097%) But which options should I...

Yes. I’m using jumbo frames. It gives a huge improvement between the vm’s but I will redesign the setup and have a seperate vswitch with jumbo frames between the vm’s and then use standard 1500 mtu on the rest of the network.

Yes, I’ve tested both directions and I get the same result, 950Mbps or more. Will test udp mode later today.

I have big issues with my home network. I'm running a esxi all in one server with pfsense, solarís, linux + some other vm's. My issue is that the smb performance is pending between 0-150Mbps, nfs performance is pretty stable at 150-200Mbps to my workstation. The setup is a esxi all in one...

I will have a look at that switch. Any other suggestions?

Hello! I'm looking for a switch with at least 20 x 1GbE ports, POE+ and 4 x 10GbE. What options do I have? This is for my home network so as cheap as possible. I've been looking at the CISCO SG500X series that looks pretty good. Currently I have a old Cisco SF300-24p switch but with only 4 x...

Is there someone that have a Cisco SF302-08MP, SF302-08MPP, SG300-10MP or SG300-10MPP switch? All of the ones I've listed uses an external 2.5A and 48V power supply (I think does are the specifications). I've lost my power supply for my SG300-10MP and really need to get a new one. I've tried...