That’s interesting. I have g502s for many. My ears now without an issue ... but can’t say that about Logitech’s keys. They fall apart just by looking at them.
I’m in the same situation right now, i did a stupid and bought 2 256 m2s years ago and it was never enough space. Trying to decide on a 2 or go double again... but this is for a laptop, I’d just go big in a desktop
Car parts lol. Yeah, I can see why the wife would get mad.
the kitchen really is a good place for working on hardware. Between the stove and dishwasher, that’s a solid setup
unfortunately, I usually throw
Mine out... didn’t really know a used market for really old stuff existed
I threw out the originally monster 3D accelerator with box that I bought to play Turok recently lol
agreed. I don’t buy much hardware anymore, but when I do I am old school and I go for the second from the top.Back in the day, far fewer choices and usually the second card was value for the money and could play most anything out there
That makes sense, and its likely what i'll do.. if it were dead, I'd have already done it. but technology moves a bit fast for that. no point in me buying a 4-500 dollar X99 mobo when i can get a 7800x and a mobo for 650. 'advanced rma' is the modern norm. I was actually surprised when they...
No, its having issues with one of the USB hubs being turned off. was having post issues with USB code, two techs confirmed they believe it a motherboard issue. The issue that prompted the tech to act in such a way was that I requested an RMA where I would get my board before sending mine back...
A member of the MSI customer support staff just told me I was a wasting his time and hung up on me. I actually asked him, if, in fact, on this recorded call he was telling me that I was a waste of time.... and he said "yes", and explained why. Would not get me a supervisor.
Basically, I have a...
Not gonna bite on the frontier edition. in order to get it to work with 6 monitors, i would need a Displayport hub. I have one at work, and all i can say is that they aren't the most reliable (in my experience). Sometimes the monitors on the hub will go black, then come back. sometimes i will...
So, i basically bought my RX570's a day before the craze. I am going to dump them off now for as much as I can get.
Heres the situation:
I have 6 1440p 144hz freesync monitors. I am currently testing a GTX 1080 founders (because they had it at the local BB)
The GTX 1080 runs very smooth and...
ah, that sucks. My 6800k did [email protected] no worries.
I ended up setting it at 1.21v and 4.3ghz for the 6850k. Stable in prime, low in temps.
When i went up in voltage, the temp would quickly rise. I have my fans all running 1400 rpm, so im not pushing that either. im maxing in the 70's on...
Ok final go around.
4.6Ghz 1.33v
1421 CB R15
190 single core.
59C max under load
I'm stopping here
edit: oh let me just retract that. Small FFTs in prime95 destroyed me. Back to 4.4 or possibly 4.2
Ah. Makes sense. I just got done reading at silicon lottery and it seems they wanted under 1.44v at 4.6. I believe you are correct for my purposes.
I got this from silicon lottery " 1.44V/4.6, 1.408V/4.5, 1.376V/4.4, 1.344V/4.3."
So, It seems like it is not worth it to go over 4.2. I will try...
I just put in a 6850k and I was pretty surprised. I am running 20c idle, and 40s with load in prime95. This is OCed at 4.2ghz with 1.2v. My 6800k took 1.25 volts to get the same oc and was easily 10c hotter. Is there any reason to push this or not?
How high to 6850's get usually?
I have six of these monitors, and all of the Nov 2016s look great. The two dec 2016's look dingy in comparison. I have two video cards, 3 displays on each card, the Dec models happen to be my middle displays. No cable issues no card issues, etc. All 4 nov models look identical, 2 dec models look...
I will see what i can do wit h the fan profile. I called powercolor and they told me those temps were normal... told him i was running an asus x99 deluxe 2 (he asked what motherboard) and then he asked me if it was an intel or amd cpu *shakes head*
I had the Asus ROG Crosshair 6 Hero. Upon returning it, i realized that I had only paid $139 dollars for it lol.
100i was not plugged into the AIO header.
I bought 2x powercolor red dragon GPUs... i tried to return them yesterday due to their excessive heat. However, they had no other RX570/580's.
My GPUs are running 60-70 degrees at idle. At 80, they shut off. The fans are not kicking in much, run ning 380rpm at idle. I tried using wattman to...
my temps were in spec. all my screen shots show that. I believe my cooling to be just fine. Could be wrong. Once again, doesnt matter at this point. Fixed the problem.
Thanks to all who contributed to this one. Maybe next time i'll stick it out :P
well, its 70 miles to the nearest microcenter. So, when I got there, I decided that I would swap the whole platform. Was I wrong? I dont know. It cost me more to go X99 ($200 extrra for the mobo, i htink there was a deal on ryzen), but I know this platform will be stable. I got one of the top...
I don thtink so. Right now i am having fan speed issues. I booted and all the sudden fan is going nuts for no apparent reason. I think i've about had it with Ryzen. I certainly am not getting stuck with this outside my return date.
Can someone please confirm this for me. I am getting temps on the motherboard showing around 50c idle 60c load. In hardware monitor its TMPIN0
I have a certain number of days to return/exchange this unit. Has Been giving me trouble, and I do not know if its the early bios or if its a hardware...
Just tried to get out of sleep, post code 8. had to remove the 'overclock'
Bad board or what? Have to decide whether or not to exchange it. if i do, it will be intel
I am not blaming the CPU here. If anything, I am blaming the entire hardware set. I am making some assumptions, yes, but I know I would not have as many issues crop up if I simply bought intel. Example, I had to run a beta bios simply to clock my ram to its normal specs. I know its easy to...
I no longer have an AM4 back plate either, so that isnt an option... i have a ... custom... am3 backplate.
I would have to source a new back plate and mount. Cooling is working fine though. The cooler mounts based on tension, and I have tension. Also, I have correct temps according to Ryzen Master.
I found some beta bios. 9945. Installed, set docp and the ram is now 2933 no issues. cinebench results came back as 1505 with no overclock.
Ram usage at the time was 14gb, total 32gb