oh ok.
Only AMD supported Xfire from different models with same chip, like HD 7970 xfire with HD 7950.
I used to run 2 x 5850 and 1 x HD 5870 in Xfire.
Hi Guys,
My current setup is this one:
i7 4930k @ 4.5GHZ
Corsair Dominator 2133Mhz 9-11-10-27 (16GB)
EVGA Supernova 1600w T2 (Titanium)
Single R9 290x
Mo-RA3 Pro , Feser 240, Feser 360 and Feser 480 X-Changer Radiators
3 x MCP 655 Pumps
lots of SSDs
I currently have triple 1440p monitors (1...
I hope you are kidding??
I would like to see you play all games at low settings at 7680x1440 because you have a single GTX Titan Black.
For that resolution, you would need 3 x Titan Black or 3 x GTX 780ti for High settings or of course 3 x R9 290, which you already have.
Your 290x is...
King4x4, I saw your thread on OCN (build log), I see you are not finished yet with your rig, Have you tried eyefinity 7680x1600 with the Display Port adapter with Quad 290x yet when you tested the cards on air.
--------------------
More updates from Warsam71 ;)
Thank you very much :D , I...
Hey King, I saw on a forum (ocn) that you got Quadfire too. Im very glad you could reach me. Which type of adapter are you using for your Dvi to DisplayPort monitor?
Also, what are your full specs, monitors, Rive Bios, OS.
Thanks for helping mate.
Thanks man, I think we are in the same boat. We need to makes the issue escalate. I have been contacted by Warsam71 from OC UK about this issue. Go at this thread and join in the discussion. http://forums.overclockers.co.uk/showthread.php?t=18576425
:cool:
Mate, I have been running 3 x HD 6970 and 4 x HD 7970 with the exact same system, same monitors, same dongles (adapters), And also, if you could actually read the OP properly, I mention that I can run Eyefinity (or Display Port only) just fine with a single card.
I can hear the Windows...
Firmware is up-to-date and it is the 2.0 (latest for my adapter)
I tried powering the adapter with a 120/240v USB adapter.
I also tried, with the RIVE dipswitch, to deactivate the first card and use the second card as my primary, I have tried all possible combination and its always the...
My issue is, I can install the Catalyst Display Drivers and be able to run my desktop in eyefinity with both DVIs output of the first card used and also the display port output. But as soon as I try to run a game in 3d mode with Eyefinity or even with a single monitor plugged via the display...
Any updates?
I also have Quad 290x and I cannot run my cards in Crossfire / Tri / Quad with the display port. It loses the signal. But I can run the display port on each single card.
Very weird.
Not too too bad. It was well spread accross the chip. It had enough of it, even maybe a little too much. It was already solidified.
(I'm still waiting for my last and fourth 290x, Ncix.ca only sent one and I ordered on the 24th at midnight, Ncix.ca has stock supply issues.
Thanks, Yeah its so heavy I need a second person to flip it. (I could probably do it alone but the rear Quad radiator (480mm) makes it hard to flip)
Yes I have one called Quad Damage Project but its more than a year old and is out of date
Thank you ;)
I have the Lepa G 1600 in the main rig...
VIDEO
Check it out in 1080p
Day Video / No music
http://www.youtube.com/watch?v=XWl9rkYxnJM
Night Video with Music
http://www.youtube.com/watch?v=1ErmK_Qdkkw
Pics of the PC
With PC turned OFF...
Sorry if I didn't read your comment correctly. I thought you were pointing at me when saying I was bitching on forum, I am making a lot of effort to get this issue sort out. And when I said its sad that Dan-D surrender, its because this guy is a reviewer, he has far more weight than me in the...
Yes I have submitted many reports, for all games, all type of crossfire, multi monitors, all drivers version. (Like MANY MANY)
I am also active on some forums where I post my updates and feedback. Just recently, I decided to buy another PSU. Still having the lockups, but the odd thig is that...