Search results

Hello, I have two 30" dell 3007WFP-HC for sale. Both have seen a lot of use but work. The backlight colors are pretty warm from age but I kept the profiled and had good color reproduction on them. One of them doesn't have any plastic case/bezel and has the LCD controls gaff taped to the bottom...

I'm not really sure which subforum is the best for this issue but since it seems to be display adapter issue I thought I would put it here. I am building a media PC into a piece of furniture and am using a chalkboard electronics touch panel to control it. This is basically a laptop screen out of...

I am having issues maintaining stable connection on a 4k panel at 60hz with 32 bit color. Reducing the refresh or color improves stability and I have the monitor OSD set to displayport 1.2 input. I have had a hard time finding a clear answer but Displayport 1.2 has the bandwidth for this...

Does anyone make a quiet 970 that runs that stock clock speeds? I bought a reference card for my work so that I had a test bench that matched out target hardware- The noise level with this PNY card is totally unacceptable. It is way louder than my zotac 780 was.

It has been a few years since I looked into this- Are there currently any software solutions for wide gamut panels in non color managed applications? I create content for and in non color managed software on a bunch of 3007WFP-HCs and constantly screen capping into photoshop for evaluation is...

One of my dell 3007s has been intermittently losing signal. The screen goes blank and the blue power light goes amber. Often times it will start again after a few seconds. I have eliminated the possibility of it being a video card output or anything related to the physical connectivity...

Has anyone actually done this successfully? Before I drop 550 + cost of one active adapter I want to make sure this works. I have read that on the 7970 you can use all outputs at once but I also know that in the past DVI and HDMI have shared bandwidth. So, has anyone here actually run 30"...

I have an intermittent system hang that requires a hard reset about once a week. It's infrequent enough that it is very difficult to figure out what is causing the problem. When it does happen the monitors all go blank, the system will not respond to keyboard commands, things like keyboard...

Does anyone know which brands (if any) 7970s include an active display port adapter? I'm looking to move from an SLI setup to a single card for my 3x30" configuration. I did some looking on newegg and a few of them have the pinouts for dual link DVI but don't include any extra power source...

Includes mounting hardware for both drill through and clamp mount. $70 shipped - CONUS only Heatware: AlecMoody Ebay: alecmoody

I'm selling a used HP LP3065. I bought this over a year ago on ebay and discovered it had a defective LCD control board causing image artifacts. I replaced that part and its working correctly. There are no dead pixels but there are some small scratches on the screen detailed in the images seen...

I just moved into a new place and none of the outlets are grounded. I got a circuit tester and discovered that I also can't get a ground off of any of the faceplate screws. I live in the south east and brown outs are fairly common. Would a quality UPS provide me with some degree of protection...

Is there a tool out there that will let me get my surround setup to work like I have 'activate all displays' running instead of having it all be one surface? I would like to get the start menu back to the middle, be able to maximize windows on each screen, full-screen streaming video correctly...

Anyone know if its possible through either eyefinity or nv surround to have two 30" monitors plus an additional three 1920 panels for an eyefinity/surround group at the same time? Basically I want to be able to run 3 monitors on my sim racing setup without having to un/replug my two 30" work...

Does sync polarity have any effect on eyefinity? I just got my third 30" which is an lp3065 with the other two being dell 3007wfp. I have Nvidia cards right now, and I researched the sync polarity ahead of time but I guess my source was wrong or it changed at some point. the dells are +/+ at...

Does anyone know if there is a tool out there that will whois and then geographically map a list of IPs but do it all client side? Even better if it can just load a log file. I'm on a shared hosting server and to my knowledge I can't install anything on my own.

I have a 3007 that I bought last year from an office building display with no bezel/case or stand. I'm wondering if anyone has a broken 3007 or even just the plastic case they would be willing to sell me? Obviously I don't need the panel or any of the electronics to work.

I'm looking for a cheap motherboard for an e6600. I don't need anything fancy, just something that works. PM me if you have something for me. Edit: Bought oen from Mackowitz

A friend and I both built similar machines recently and our HDs are both very loud. Its loud enough to the point that If I am in another room I can hear hard drive clicking while my machine is sitting idle. I have read that western digital produced two versions of their 320gb drive where one...

I just built a machine for a friend and his second monitor (3007) is getting these horizontal gray bars flickering across the middle of the screen intermittently. It seems to be tied to mouse input in some way as it doesn't happen when we aren't using the machine. The drivers are up to date...

I have a lacie eye blue eye pro system but its not working well with my dual monitor setup and lacie support's position is that their software doesn't officially support multiple monitors and they have no ETA for adding support. Can anyone recommend some good alternative software for building...

I'm sure there are other people here running the lacie calibration software who might be able to help. When I run the blue eye software often times while its loading windows will freeze and not accept any input forcing me to hard restart. The display profile will load instantly but the window...

I just took the machine apart, cleaned everything, and reapplied thermal paste. Both hard drives are also freshly formatted and there is a clean, updated install of windows vista home 64bit (disc included) and I also installed sound and graphics drivers. Computer is ready to go. I never...

I have a dell 3007, is a diluted mixture of distilled water and isopropyl alcohol actually safe to use? I have never been confident enough to use anything other than distilled water to clean and there are some spots that aren't coming off easily. Also is the AG coating/external surface...

I have read several articles that say that intel is shrinking its manufacturing process and will be switching out the 40gb x25-v with an 80gb model in q4 2010. Does anyone know anything more specific about when this is expected to happen or if intel is on schedule with 25nm?

I'm buying my girlfriend a netbook for basic web and media use and I was wondering if anyone had a good list XP optimizations to make? I'm looking at getting an asus 1005ha: http://www.newegg.com/Product/Product.aspx?Item=N82E16834220584&cm_re=asus_1005ha-_-34-220-584-_-Product any...

I have searched google and these forums about this pretty extensively and can't find a reliable answer, some say yes and some say no. Does windows 7 force color management of un-colormanaged applications (games, browsers...)? Is the desktop now color managed? Is there anyone here who is...

Does anyone know if its possible to set up a nearest neighbor sampling method through the nvidia display panel when using resolutions that are exactly width/2*height/2? Is there third party software that can do this?

All of the prosumer 30" lcds on the market today (less than $2000 price point) appear to be wide gamut. As a game artist I do a lot of work in un-colormanaged spaces and the whole wide gamut thing is a particularly annoying for me. Does anyone know what the last/best prosumer 30" was? The dell...

I'm looking for the cheapest/best option for setting up a large racing simulator with eyefinity. I think if I can find a TV without tons of input lag that would be better/cheaper than using 30" monitors since trying to drive 3x2560x1600 panels at a good frame rate would be very difficult. Input...

I made another post about this yesterday but for some reason I chose to edit one of my existing posts instead of starting a new thread. The problem occurs if I hit the input button on my HP LP3065. When the monitor regains signal the image is extra contrasty, smears badly/the image cross...

I edited the original post as it is clear to me upon receiving the monitor that the back lighting is fine. I bought an HP lp3065 off of ebay this week for $180 with the understanding that it had problems and minimal testing had been done. The seller thought it was the backlighting but the ccfl...