Search results

Sorry for the delay guys but I have been busy with a my other project Codename: 69 and I'm waiting for some sponsorship for this project so I'll update as soon as posible... The air goes into the Storm Cage from the front and goes out the same way, well I don't know how to explain this but...

CypriUm 2.5 - Oct 27, 2009 Testing the New Loop and the Custom Res Video: http://www.youtube.com/watch?v=m_Mmu63VBsg Just some small leak that can be fix easily... so this project is almost done by the way I have to make a new mobo tray because the prevouis loop was the mobo tray so I have to...

Yeap some people think copper is too expensive... But if you go to your local hardware store instead of using online stores to buy the copper you will save a lot of money... well... build the frame cost me around US$150.00 but a regular good looking can cost you $80~120 and the water cooling...

CypriUm 2.5 - Oct 24, 2009 Today I take care of the leaking issue on the rear part of the frame... so here is... Tomorrow I'll start to polish the frame so that's for today...!!! G'Night everybody :) So the only thing let to do is... - Patch some pipe that are leaking [Done] -...

That was what I think when I see the final pics... maybe snoop dogg will luv this PC!!! :D

CypriUm 2.5 - Oct 22, 2009 Part 4 of 4 So the only thing let to do is... - Patch some pipe that are leaking - Polish the Whole Frame - Change the LED of the Fan - Put everything Back together Thank for Watching!!!

CypriUm 2.5 Oct 22, 2009 Part 3 of 4 Continue in the Next Post!!!

CypriUm 2.5 Oct 22, 2009 Part 2 of 4 Continue in the Next Post!!!

CypriUm 2.5 Oct 22, 2009 Finally after 11 months I get my hand on this plastic parts that I bought to make the CypriUm 1.0 Reservoir. This is prototype res am planning to do soon so here is the whole build log of this res in case you want to do it yourself! Part 1 of 4...

Thank man!!! :D

CypriUm ver 2.5 Oct 21, 2009 As I remove the small water deposit from the loop I decided to go with some old crazy ideas that were left out. So today I manage to work in the first part of it, the small tank that will measure the water flow and indicate how much water do I need to fill the loop...

CypriUm 2.5 - Oct 20, 2009 Pay close attention to this update because this is the main key for the upgrade. Ver 1.0 & 2.0 Ver 2.5 Here you can see one of the many "blockers" that I put into the copper pipe to redirect the path of the water, I just remove this blocker because I...

Some here some update! Ver 1.0 Ver 2.0 Ver 2.5 Some Clear Hose for the skepticals! More to come!!!

I just assemble a quick system with some part I have laying around this system is Air Cooler and has some extreme temps so I'll trought into the CypriUm frame to see what is gonna happen!!! More Later!!!

Well, I was very pleased with the final outcomes but I decided to do some change to CypriUm... so you can draw a line here because this is CypriUm 2.5... CypriUm 1.0 from December 2008 - June 2009 CypriUm 2.0 from July 2009 - September 2009...

Well, maybe you misunderstood the concept or I didn't explained right!!! but the whole case is the loop and work as the radiator aswell so what need to be cool down is the path of the loop!!! ;)

Well the PHASE 1 is now Completed Phase 2 is in progress... The Ultimate Radiator video: http://www.youtube.com/watch?v=0cfIevINq0s Final Video video: http://www.youtube.com/watch?v=mWN1YXQN9TI Thank you all for watching this amazing project if you luv this build you will luv even more PHASE...

Thank you!!! That is not the Rad.. I didn't use any Rad on this build!!! :cool:

Category 4 - C5C October 15, 2009 - Controlling Mother Nature - Temp Test Video: http://www.youtube.com/watch?v=_1cUxXPf8dY Initial Temp 70F (Warm water was used to make this Test) 15 Min (After): 68F 30 Min (After): 67.5F 45 Min (After): 67.1F Without any special setting or Hardware, just...

Category 4 - C5C October 14, 2009 New Mod City's New Water Block for socket 775, 1156 & 1366 Testing the Storm Cage ver. 2.0 Video: http://www.youtube.com/watch?v=CraO52nrghw

Category 4 - C5C October 14, 2009 The Storm Cage ver. 2.0 The first design was nice but it didn't let the air from the 2x 140mm fans go into the cage to create the chaos I was expecting so I decided to cut the front and add something I found at a local 0.99 cent store. My niece Modding with...

Video Updates http://www.youtube.com/watch?v=Pip_3YbYgiw The Storm Cage - Full Test Oct 11 - 2009 http://www.youtube.com/watch?v=xod_ooWKlv8

Category 4 - C5C October 08, 2009 The New Storm Controller 3.5 Bay Old Fan Controller vs New 3.5 Bay Fan Controller

Category 4 - C5C September 25, 2009 Here are more pictures of the front... In this chapter we're going to disassemble the lightning machine to see how we are going to connect that to the PSU and move the controller to the front of the case.

Category 4 - C5C September 24, 2009 Hardware fit test... I have to option to mount 2x 2.5 HDD but don't know which one will be better! Behind the mobo tray or in behind the fan controller on top the Storm Cage any suggestions are welcome!

Category 4 - C5C September 23, 2009 Finally I manage to make some time for my previous projects!!! [PAINTING]

Thank you!!! :D

COMPLETED! The only thing left to do is some night shots and we are good to go!!! So you already see the NMC Exclusive Pictures...!!! This are the NMC non-exclusive pictures!!!

Shiny CypriUm!!!

The only thing left to do is: Add the Cold Cathode Light, Add the Ram Cooler and Polish!!! So stay tuned!!!

CypriUm Mega-Update - Making the Video Card Bracket - Converting the P4 Connector to 4x 3 Pin Connectors - Painting and Mounting the 3x 120mm Fan Loop Cooler

Sorry guys for no reply on time but I was too busy with my new project and somethings on my website.. Thank you all for you kind words mean a lot to me!!! ;):D

Custom Fan Cooler preview. So I decided to remove all possible heat from the case, everyone knows that the hard drive, PSU and even the Pump radiate heat so I figured out how to keep the loop at a very nice temp by keep cool those components.

jejeje... Britney call to see if I can M.O.D her head 1x 140mm both side of the Head for more Air Flow.. jaja Thanks man!

So here is the Complete Custom Ram Cooler!!! Enjoy it!

Yeah... I know!!! I have to re-link all my pics am planning to do that during the weekend! ;)

Here is the Build Log of the Custom Ram Cooler!!! The pictures speak for themselves. Now I'll paint it black...!!! and will add some LEDs... That's tonight... so stay tuned!

Finally after 2 weeks smashing my head in the walls finally found the final CM part... sooo... now this is what you will see in the next pictures 2x Cooler Master Socket 370 Heatsinks but what I'll in the next few post... is a Custom Ram Cooler :D so that confirm my entry to the CM Case Modding...

Testing the New Fan Setting... New NMC Decals! Watermelon Not Included!

lol... thanks man! :D;)