Search results

Went 8 hours of Prime95 last night just fine, Highest core temp was 59C

Well im not back up to 400FSB and 3600mhz yet, seeing if this 3401mhz cpu and 378mhz FSB will hold It's crossed the first hour of Prime95... Highest core is @ 59C

Runnin Prime right now on it. 1511FSB RAMs at 377.9x2 mhz CPU @ 3401.4 @ 1.384v after vdroop Well see if this one holds

Don't mind the mess, was the night of the build, and was trying to Diagnose what turned out to be a DOA Hard drive... Also forgot to take the Athlon 64 sticker off from my old setup. :D

I bumped the FSB up till calculated CPU speed showed 3400, had the ram unlinked and set at 800, showed 800 calculated, set vcore to 1.45 rebooted and it would lock at post screen, had to reset CMOS and went back to 3.2 settings. I took the vCore down a little, and running stable at 1.344...

Stable at 355 FSB x9 @ 3.2GHz with 1.38v and the rest on auto... with RAM @ 790mhz, went 9 hours of Prime95 today Not aiming for a specific FSB, just as close to 3.6 as I can get.

Went to 8x450 last night with the RAM unlinked at 800mhz With vCore at 1.51 in bios (1.448 under load according to cpuz) FSB: 1.45 Memory 2.10 SPP 1.50 NF200 1.25 Prime95 ran for 2 hours 32 minutes before Core 2 returned a rounding error. Temps never crossed 63C :(

I will try that when I get home, Im not sure if my Corsair XMS2 will take 900mhz The FSB Voltage when on Auto was 1.40, so thats what it always was when testing. RAM has always been on Auto, and had always picked the stock ram timing of 5-5-5-18 when at 9x400 My NF200 was at 1.3 last...

I bumped the other voltages up one notch, stress tested again last night @ 1.5 bios vCore Core #2 crapped out at 2hours 45 minutes, the other 3 ran for 8 hours without error, Temps never went above 63C It's getting better.

Above 1.48 I have seen 67-68C at load. With vCore set to 1.51 in BIOS, CPU-Z showed 1.448 under full load. I have no idea, these terms for voltages dont match any other board I read about.

I have been stress testing this Q6600 for days trying to get it stable @ 3.60GHz My Setup: Q6600 G0 VID: 1.2625 w/Tuniq Tower 120 EVGA nvidia 750i SLi FTW mobo 2x2GB Corsair XMS2 DDR2 800MHZ 5-5-5-18 2xGeforce 8800GT in SLi Windows Vista x64 SP1 I have been struggling to get it...